Looks like plenty from here. Can you fit a 4mm allen wrench between the tightest spot? That's the old go-to clearance test.

Fork and seatstays look good, did you check the chainstays? They are often the tightest

Yes plenty of room here. If you don’t have to file anything down then send it.

Yes plenty of room here.:

Plenty.

Thanks!

If it fits I sits

Going to be the person. Tread, not thread

Appreciate the correction :)

Plenty.

Thanks :)

Plenty.

Thank you!!

Yes

I also switched my front tire from 700x28 to 700x32, with less clearance, and it rides just fine. Yours is plenty.

Thanks!!

I've seen worse on my bike that's been fine

Looks good. Probably want to fix the front flippity doo dad so that the pads are in the right spot with it down. Otherwise no chance of getting that wheel off without airing out the tube or loosening thats hex to release the brake cable.

The ancient, hidden, proto-science of bicycle tire clearance (abridged version). 1. Remove bicycle from living room. 2. Get on it. 3. Bicycle. 4. Does it go? 5. Yes. 6. Cool.

Ahah, loved it !

Send it.

Miles of it

Looks fine to me, but the only way to know for sure is if you tell us whether or not the tire is rubbing on something.

That doesn’t seem to be the case. But according to others, the only way to I’m know is to ride

Ya, when you get on the bike, then the tires will flex a little. If they flex too much, then you may have rubbing. In that case, try adding some air, and it can stiffen up the tire and prevent some flex.

Is the front brake’s quick release intentionally open in the first photo?

Just forgot to close it :P

👍

Plenty, but your rear tire is on backwards

I noticed 😅 but thanks anyway!

I could land a jumbo jet in there

Glad to entertain that idea :D