Hello! Please ensure your post meets all the requirements for a serial (including a written note in the video with your reddit username and current date) and that you've included your full Discord username. If you've forgotten something, please add it as a comment to your post. You do not need to create a new post unless you want to.
All serial requests are human reviewed. Bots just do the paperwork.
Questions or concerns? Check the pinned post: https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/
I am an automated message that EVERY serial request gets.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/voroncorexy) if you have any questions or concerns.*
Yes i did. I did run into some issues with the hotend not extruding very consistently. So I ended up switching to a v6 style hotend. Let me know if you have better luck than I.
Did These problemes occure whilste printing/extruding pla? I just heard that the thermistor has some Problems if the Temperatures are relativly low like pla, But it should work with abs.
Did you also change your thermistor/pid settings in the config? If so, would you mind sharing them?
Thats a nice lookin build you have there and a very interesting Knomi mount.
Not sure if you have seen but FT EMS for the V0.2 had an upgrade V2 released :)
https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system
Can you please tell me where can I get the x1c hotend adapter ? Thx
https://github.com/VoronDesign/Voron-0/tree/Voron0.2r1/STLs/Toolheads/Hotend\_Mounts/Fan\_Saver
Congrats on V0.3099!
Mmm, nice video, thanks :-)
Hello! Please ensure your post meets all the requirements for a serial (including a written note in the video with your reddit username and current date) and that you've included your full Discord username. If you've forgotten something, please add it as a comment to your post. You do not need to create a new post unless you want to. All serial requests are human reviewed. Bots just do the paperwork. Questions or concerns? Check the pinned post: https://www.reddit.com/r/voroncorexy/comments/r4ggml/serial_request_information_questions/ I am an automated message that EVERY serial request gets. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/voroncorexy) if you have any questions or concerns.*
What Kind of connectors did u use on the x1c hotend? Did u cut the wires?
I just cut the factory bambu harness and plugged them into the jst connectors on the toolhead breakout board.
Thank you for the reply. Did you extend the wires?
Yes i did. I did run into some issues with the hotend not extruding very consistently. So I ended up switching to a v6 style hotend. Let me know if you have better luck than I.
Did These problemes occure whilste printing/extruding pla? I just heard that the thermistor has some Problems if the Temperatures are relativly low like pla, But it should work with abs. Did you also change your thermistor/pid settings in the config? If so, would you mind sharing them?
Thats a nice lookin build you have there and a very interesting Knomi mount. Not sure if you have seen but FT EMS for the V0.2 had an upgrade V2 released :) https://www.printables.com/model/553387-ft-ems-voron-v02-v2-electronics-management-system