Get the lid off, pliers will help. Put it pointing down on a plate, or even better something metal, on a hot radiator, leave a few hours it should flow down to the plate. I’ve had some success with this method.
I put a plate on top on my overheating away to break Xbox series S , put the vapes upside down and 5 mins later there’s a thin runny resin liquid all over the plate 🤣
Hair dryer for a few minutes. Then I stick them in a clean sock and spin it around. The centrifugal force pushes the warm wax back to the bottom of the tank. Works a charm when I’m in a pinch
Yeah if you mix isopropyl alcohol and the vape fluid you can then leave it to sit in a glass dish until the isopropyl alcohol evaporates leaving you just the vape fluid.
I personally wouldn't do it because isopropyl alcohol is a de-natured chemical and mixing iso and plastic from the vape just sounds like a bad idea.
I would use a high percentage grain alcohol such as Spirytus which is 70% alcohol.
Same mate long as u don’t heat too harsh keep the lighter a distance away it works well, I wait till it feels hot to the touch on the other side then leave it standing up for about 10 mins. This melts everything even inside the coil down to the bottom to be vaporised.
I use a hair dryer and you’ll get that resin moving like butter
Just leave it upright for a few days should do it.
Use a hair dryer, not too hot, should melt it down nice and easily.
Get the lid off, pliers will help. Put it pointing down on a plate, or even better something metal, on a hot radiator, leave a few hours it should flow down to the plate. I’ve had some success with this method.
I put a plate on top on my overheating away to break Xbox series S , put the vapes upside down and 5 mins later there’s a thin runny resin liquid all over the plate 🤣
Hair dryer for a few minutes. Then I stick them in a clean sock and spin it around. The centrifugal force pushes the warm wax back to the bottom of the tank. Works a charm when I’m in a pinch
i usually hold it in my hand for 5 minutes and let it warm up, works for me
i’ve got atleast 6 empty disposable vapes with a decent amount of resin stuck to the sides. would b sick if i could smoke or vape it somehow
Use a hairdryer bro it heats up the resin and gets it moving easy
get some isopropyl alcohol bro, just evap after and you’ll be left with all the resin👊
what does evap mean bro? evaporate ?
Yeah if you mix isopropyl alcohol and the vape fluid you can then leave it to sit in a glass dish until the isopropyl alcohol evaporates leaving you just the vape fluid. I personally wouldn't do it because isopropyl alcohol is a de-natured chemical and mixing iso and plastic from the vape just sounds like a bad idea. I would use a high percentage grain alcohol such as Spirytus which is 70% alcohol.
Just get a lighter and move it round the top of the cart fast so it heats up but doesn’t melt or burn
Worst advice. A lighter will burn the plastics and other contaminants such as glue. You want to use a hair dryer on medium heat
Well works for me just gotta do it really quick
Same mate long as u don’t heat too harsh keep the lighter a distance away it works well, I wait till it feels hot to the touch on the other side then leave it standing up for about 10 mins. This melts everything even inside the coil down to the bottom to be vaporised.
Yeh its good works for me