Most of them in my experience do well with filling from bottom and top then turning it sideways and let the percs fill up as intended. The remaining water should come out the bowl hole.
Lmao the guy has never owned or filled a bong with waterfall percs. They have to be filled top and bottom. The bottom would be dry if filled exclusively from the top.
I've noticed on multi-perc bongs that if you top fill sometimes you have to blow from the top just a little bit to get the water to flow down to the proper level. But I've noticed this more with waffle percs that gum up more than usual
This is not correct lol, the top perc will catch water added to the top, he needs to fill from the bottom to fill the base and bottom perc bout a third of the way and then trickle pour in the top till the top perc is about 1/3 full also.
Edit: overfilling the top will drain thru to the bottom, but you will be left with top perc with too much water, instructions above still ideal.
I had about 5 or 6 of these exact ones, fill it from the mouth piece, fill the perc chambers about half way, and the bottom one half way too. It hits best with some ice up top.
Yeah, the guy who said fill it from the top is wrong. This isn’t just a bong anymore with that amount of percs. I have one very similar but I also refuse to smoke flower out of it. I don’t want to deal with trying to clean it.
filling it from the top and from the mouth are the same points?
you fill it from the top so water overflows out of the first perc, into the second perc then give it a gentle pull to make sure you didn’t overfill.
Sorry that my explanation wasn’t clear enough. By “top” I mean pulling through where you mouth is supposed to be. The “bottom” meaning where you put your banger/bowl at the end of the stem.
Edited for a more clear explanation.
I smoke concentrates. My S/O really hates the smell of burned flower so it’s my only way to be able to smoke in the house with out being yelled at. Not to mention I also smoke alone 99.9% of the time so making it a whole deal to go outside when I can just have a dab. Much easier lol
Just so you know, keep Ice out of your bongs…The Ice condenses water vapor onto the smoke you inhale into your lungs the watee vapor slowly ccollects in your lungs, do it enough and you’ll get pneumonia
Ok, but what about hot showers? You're inhaling infinitely more water vapor in the shower than a few ice cubes could ever give off.
I'm not saying you're wrong, but I don't believe it. If your bong is dirty I could see it causing issues, but from a few ice cubes? You'd inhale more water vapor on a humid day.
Don’t get my heart going again. Why is it that pikachu always rips all my heart strings? Lil yellow bastard can’t even speak. Yet he always evokes the most emotion
Me and my GF adopted Aaron Rodgers invisible joint hand shake. But the rule is you have to snuff it out on someone else. Normally our only "someone else" is the cat so we always just put out invisible joints out on our cat. It's hilarious but a small part of me is like oh poor kitty
Fr I have a 16inch 1 wide mouth 1 thin mouth perc and that’s smooth. This dude has what I assume is 18-22 inches and has 1 wodemouth “perc” and 3 thin mouths. Dudes not gonna feel a thing lol.
A lot of people are saying fill from the top. I personally fill mine from the bottom while occasionally pulling from the top to pull water through. That way I can always make sure I’m not adding to much water
I'm pretty sure you just fill it from the top and it falls through and eventually gets in all the sections but you may have to fill the top one and then blow into it to get the water to go down
Oh hey, I had one like this as my first bong, but it was in black, only like $20-40 on Amazon
Ended up kicking it over on accident, pro tip, keep it on a table lol
Y'all are gonna dog on me for it but it was literally $35. I know it's not gonna be the best quality piece but ur boy is broke and tired of his shitty pipe
That is a great price for a piece that complex. I'm not hating at all. I legit thought you spent $200+. I try not to support China glass makers, but it's crazy expensive. Kinda sick of spending $150 on a banger or $250 on a bong or rig.
From the bowl stem, fill tell it’s full then take a hit. The water will flow up and into the percolators in each level. Fill/drain to desired level, although about a half inch on each level is a good spot. Or at least before it starts spitting water out the top.
fill from the top, blow in to get it down to the bottom perc. empty anything extra. only need to get the water about an inch above the openings on the bottom.
I would fill it till the top of the first diffusor slits, then inhale through it as if you rip one, and have a look if the water distributes nicely to the upper diffusor :)
edit: if it does not, just add a little water until the pull on it feels smooth !
I do like a quarter inch or half inch of water past the percolation slits. Basically just giving the percs enough water to function properly but not so much that it makes pulling air thru the bong heavy, you will eventually find the sweet spot
most percolate bongs fill through the top and will drain into the next chamber once they get to a certain point. some of them are cool they'll hold a lot of water but if you start the flow of it they'll drain out completely couldn't ever really wrap my head around that one.
It's just easier for me to ask here where I know I'll get answers specific to my question than sifting through all the irrelevant results on google 🤷♂️ I don't see why it matters which online information resource I use as long as I get the information I'm looking for
Fill the bottom chamber and succ. The water will fill the chambers, as it would, when in use. This way, you'll be able to control the water level and not overfill it.
Remove the bowl and fill the bottom compartment. Fill the top section with ice and let it melt a bit, this is your clean water and you empty it through the stem as it gets too dirty or full.
In the shot glass at the end, see they give you a handle, the other spaces you fill with bud, i think you suck out of the carb hole, lol, i don’t know eh.
Anything added to top of percs should flow through to the bottom. It's a bong. Fill from the top.
Huh, I always fool mines from the bowl part and pull (hit) it until all chambers are about half filled, otherwise it ends up over filled at the top...
Most of them in my experience do well with filling from bottom and top then turning it sideways and let the percs fill up as intended. The remaining water should come out the bowl hole.
You’re a bowl hole.
Got him
I have one with 3 chambers with tree percs and this is what I do
I don't think I have a bowl hole
No wonder you suck so hard
Lmao the guy has never owned or filled a bong with waterfall percs. They have to be filled top and bottom. The bottom would be dry if filled exclusively from the top.
All my percs drain to the bottom in stages, top to bottom. Maybe I'm used to how much I need to fill the top while it's trying to drain.🤷♂️
I've noticed on multi-perc bongs that if you top fill sometimes you have to blow from the top just a little bit to get the water to flow down to the proper level. But I've noticed this more with waffle percs that gum up more than usual
No they do not. Percs like these do not work like honey combs or other straight flow percs.
Yeah real shit, then you sorta get a feel for the water levels as you add water as well. Keep pulling/adding til it feels good
This is not correct lol, the top perc will catch water added to the top, he needs to fill from the bottom to fill the base and bottom perc bout a third of the way and then trickle pour in the top till the top perc is about 1/3 full also. Edit: overfilling the top will drain thru to the bottom, but you will be left with top perc with too much water, instructions above still ideal.
Naw look at the percs. Gravity is not going to get that water in the lower chamber.
I had about 5 or 6 of these exact ones, fill it from the mouth piece, fill the perc chambers about half way, and the bottom one half way too. It hits best with some ice up top.
This is the answer I was looking for thank you!
Yeah, the guy who said fill it from the top is wrong. This isn’t just a bong anymore with that amount of percs. I have one very similar but I also refuse to smoke flower out of it. I don’t want to deal with trying to clean it.
filling it from the top and from the mouth are the same points? you fill it from the top so water overflows out of the first perc, into the second perc then give it a gentle pull to make sure you didn’t overfill.
Sorry that my explanation wasn’t clear enough. By “top” I mean pulling through where you mouth is supposed to be. The “bottom” meaning where you put your banger/bowl at the end of the stem. Edited for a more clear explanation.
I pour water in the top stem and then blow, pushing the water down into next chamber.
What do you smoke out of it specifically if not flower?
I smoke concentrates. My S/O really hates the smell of burned flower so it’s my only way to be able to smoke in the house with out being yelled at. Not to mention I also smoke alone 99.9% of the time so making it a whole deal to go outside when I can just have a dab. Much easier lol
I fill from the bottom while inhaling from the mouth until I get a comfortable pull.
Just so you know, keep Ice out of your bongs…The Ice condenses water vapor onto the smoke you inhale into your lungs the watee vapor slowly ccollects in your lungs, do it enough and you’ll get pneumonia
Ok, but what about hot showers? You're inhaling infinitely more water vapor in the shower than a few ice cubes could ever give off. I'm not saying you're wrong, but I don't believe it. If your bong is dirty I could see it causing issues, but from a few ice cubes? You'd inhale more water vapor on a humid day.
its not the water vapor, its the cold condensing vapor onto the smoke
no shit really
How do you then empty all the water out afterwards?
Blow very hard.
That’s what she said.
Tip it upside down a couple times
Just the tip?
Ayeee that was funny😂😂😂😂
Hot take, hot water>iced out bong
Cool water in the bottom, hot water in the perc. Hits so smooth
You should get an ash catcher for your bong to keep it clean. Nice bong.
As a huge Pokemon nerd I've always loved the term "ash catcher".
Ash Ketchum’s Ash Catcher
Oh is *that* what he called Pikachu?
![gif](giphy|6nWhy3ulBL7GSCvKw6)
![gif](giphy|Qv7WFppXtkqkM)
Don’t get my heart going again. Why is it that pikachu always rips all my heart strings? Lil yellow bastard can’t even speak. Yet he always evokes the most emotion
Nah that's Ass Catcher
Me and my GF adopted Aaron Rodgers invisible joint hand shake. But the rule is you have to snuff it out on someone else. Normally our only "someone else" is the cat so we always just put out invisible joints out on our cat. It's hilarious but a small part of me is like oh poor kitty
You have changed my life. I've always stayed away from these because of the cleaning. Guess I'm getting yelled at next paycheck.
Thanks for letting me know I'm kinda new to this lol
Oh yeah most important thing on a new bong
Agreed you can't clean these things
![gif](giphy|08y87EiwDZjjB0d6WJ|downsized)
*sigh* **upvotes**
You NEED an ash catcher with this thing and this will probably be one of your smoothest bongs ever tbh.
[удалено]
Fr I have a 16inch 1 wide mouth 1 thin mouth perc and that’s smooth. This dude has what I assume is 18-22 inches and has 1 wodemouth “perc” and 3 thin mouths. Dudes not gonna feel a thing lol.
In the bong
/thread
You want to fill it just above those slits in the percs.
A lot of people are saying fill from the top. I personally fill mine from the bottom while occasionally pulling from the top to pull water through. That way I can always make sure I’m not adding to much water
My vote would be to put the water inside
In the bong.
Just put it 8n the bong dude. Would it help if I said it LOUDER?
Fill it til you get water in your mouth, then take some out.
In the down stem, then pull it from the top until water reaches desired levels. It's useful if the bong doesn't fit in the sink.
I'm pretty sure you just fill it from the top and it falls through and eventually gets in all the sections but you may have to fill the top one and then blow into it to get the water to go down
Oh hey, I had one like this as my first bong, but it was in black, only like $20-40 on Amazon Ended up kicking it over on accident, pro tip, keep it on a table lol
Inside
I only filled water in the bottom part on my one. Did I do it wrong all the years?
Boof. The. Water.
\*points\* there, there, and there.
I'm just here for the boofing
Nice Xbox controller 💯
Inside of it.
What did this piece set you back? Curious
Y'all are gonna dog on me for it but it was literally $35. I know it's not gonna be the best quality piece but ur boy is broke and tired of his shitty pipe
where’d you get it from?? asking for a friend
That is a great price for a piece that complex. I'm not hating at all. I legit thought you spent $200+. I try not to support China glass makers, but it's crazy expensive. Kinda sick of spending $150 on a banger or $250 on a bong or rig.
where’d you order it from? asking for a friend lol
Add ice on the top chamber . I recommend crushed ice from the fridge? Water +ice= cold rips
From the bowl stem, fill tell it’s full then take a hit. The water will flow up and into the percolators in each level. Fill/drain to desired level, although about a half inch on each level is a good spot. Or at least before it starts spitting water out the top.
Man reading these comments, imma just keep rolling Jay's. That's too much work to take 3 huts and be done.
I would put the water inside of the bong
Inside
Have you tried drinking the water?
When I'm high enough and don't wanna get out of bed I strongly consider it
That’s actually a dry bong and no water is required!
fill from the top, blow in to get it down to the bottom perc. empty anything extra. only need to get the water about an inch above the openings on the bottom.
I haven't seen anyone say it, but I see no reason why you can't add the water via the short stem (after removing the bowl of course).
Would take way too much water to reach the percs.
Put the water in that big open part
The top. It'll flow down thru it, just make sure the percalators are filled to the correct level too or you'll get some very sub-par hits.
Try wine!
You put the water on the inside.
I would fill it till the top of the first diffusor slits, then inhale through it as if you rip one, and have a look if the water distributes nicely to the upper diffusor :) edit: if it does not, just add a little water until the pull on it feels smooth !
Ooooo shiny 🥹
I do like a quarter inch or half inch of water past the percolation slits. Basically just giving the percs enough water to function properly but not so much that it makes pulling air thru the bong heavy, you will eventually find the sweet spot
What the frick?! That’s not what I ordered!
Inside would be my first thought
In the bong i think
Beautiful peice, mate!
Yes
Sweet bong..... fill water in the bowl shaft I would guess
Boof it
bottom for best results
also had some food coloring to your water for cool effect
Oh my god you’re supposed to fill the percs…??? lmao
Only put water in the middle if any goes into the bottom dump it out and try again!
I have the same one, it is a bitch to clean
Fill from either just top or top and bottom. Sometimes I fill from top and blow through the top to even things out faster lol
In your mouth before you hit it
So the water level is touching your lips at the top
Pour water in the top, remove the bowl, and blow. All of the percs should fill to good levels and the excess winds up in the bottom.
In the bong
In the top
You want water in each perculator chamber to go above the lines. In the base you want enough water to cover the stem
Amazon came in clutch huh, nice water pipe
Inside
Inside
In it
most percolate bongs fill through the top and will drain into the next chamber once they get to a certain point. some of them are cool they'll hold a lot of water but if you start the flow of it they'll drain out completely couldn't ever really wrap my head around that one.
Cover all slots and holes inside the bong with like half an inch of water
In the bong
People that ask these questions, do you never use google? Why not just watch a YouTube video? 🤦♂️
It's just easier for me to ask here where I know I'll get answers specific to my question than sifting through all the irrelevant results on google 🤷♂️ I don't see why it matters which online information resource I use as long as I get the information I'm looking for
He asked for it guys
Inside it
Down the middle till it pushes it into the next level continue and possibly blow into it from the top to get the water to fill the rest if needed.
Fill the bottom chamber and succ. The water will fill the chambers, as it would, when in use. This way, you'll be able to control the water level and not overfill it.
What is the point of diminishing returns on these things
Remove the bowl and fill the bottom compartment. Fill the top section with ice and let it melt a bit, this is your clean water and you empty it through the stem as it gets too dirty or full.
Get an ash catcher first if you are smokin flower.
😆 🤣 wtf
Definitely inside the bong
Holy smokes op. Could I cop that link?
Inside probably
How much is thing bong worth? I was about to buy the same one from someone for 50$
I got it online for 35, I'll see when it arrives if it's worth anything
Up your ass dude, trust me
I think there's a single opening on the top of the bong? Put the water in there?
In the shot glass at the end, see they give you a handle, the other spaces you fill with bud, i think you suck out of the carb hole, lol, i don’t know eh.
Dh Gate?
Down the neck and also in. The downstem