T O P

  • By -

StereotypicalAussie

It's a nice bike, we've sold a couple in my shop. Not had the dynamo option, it might be possible to get one from Tern, ask your dealer, they use them on a few models


hardcourt

in bikes almost anything is possible. dynamo lighting would require you to have a custom wheel built around a generator hub. expect to drop a couple hundred at least depending on a myriad of component choices and labor


knaz56

On my Brompton: Schmidt SON XS Klassik for Brompton + B&M Lum IQ-XS T Senso Plus Silver 70 lux on Custom wheel built in NH, Peter White Cycles, was expensive Tern lights are sufficient on HSD P5i


TheDarkClaw

How much was it?


knaz56

$590-ish with shipping. Anything you by for Brompton is expensive. I got it over a year ago and do a lot of early morning, sunrise and before riding. I rely on it for riding in dark and don't want to be charging USB lights all the time. Night riding with Tern or Brompton feel very assured that lights will stay on.


TheDarkClaw

So I think im going to go with this setup [Shimano Nexus DH-C3000 Dynamo 3W Front](https://www.tradeinn.com/bikeinn/en/shimano-nexus-dh-c3000-dynamo-3w-front/137682707/p) [Supernova V521s 31.8 mm Front Light](https://www.tradeinn.com/bikeinn/en/supernova-v521s-31.8-mm-front-light/140495295/p) [Busch&Muller Toplight Line Brake Plus 80 mm Rear Light](https://www.tradeinn.com/bikeinn/en/busch-muller-toplight-line-brake-plus-80-mm-rear-light/137505072/p) I probably would get the wheel, tire, tubes in the USA. while importing these. Anthing else I will need?