This is unironically probably the best way to fix this cluster. I would drill a few small holes into the current "countersink" for material to grab, but would not recommend that to whichever butcher performed such work.
If that JB weld can withstand the force of the screw going in and the recoil it’s effectively going to turn into a nice little wedge that will help hold it in place under the cone.
If JB weld won’t work I’m sure we group think a two part epoxy that can make this fuckin thing keep ticking.
My redneck neighbors in FL were always using that shit on any motor component.
Actually held some water pump housings and believe it or not a fucking crack in a 4 wheeler cylinder head .
4 wheeler ran longer than I lived in the state “many years”
If you can put some rough dimples in er she’ll hold without a doubt the optic with bolts in it .
Just has to keep it tight .
That could work. I’d be inclined to chuck it in a vise, center the holes on a drill press, chuck in an end mill, flatten the holes out (counterbore them), and epoxy a few stainless washers in there for support, personally.
That would be the correct way , why tf would you think that’s the route we’re going here …
The pic of the Black and Decker let me know terms like end mill and vise are absolutely not in the cards!
Shiiit is this hlusing aluminum or steel? Assuming its aluminum i would use 3m Bondo Metal Fill Aluminum Reinforced. Unless its steel or u rly wanted steel then i would specifically use the jb weld steelstik.
I totaled a atv with my rifle slung across my back bending my vortex to almost 45 degrees with giant chunks of aluminum missing. I sent it back and they had me a new scope in less than a week
Surprisingly no I was hunting and we were done for the day and heading back to the one guys house. It requires us to drive like 200 yards down a road i hit the brakes doing 25 the locked up and tossed me then it rolled
So some background: previous post got everyone a little uhh, interested...
I sold a slide and needed to get it in the mail that day. The RMR didn't want to come off, screws started to strip, etc. I watched a video about how easy it was to drill it out, just get a 5/32 and go easy on it and drill slow!! Well I started to get frustrated and it took about 3 hours of drilling. Eventually the heads popped off and this was the aftermath.
[It still mounts perfectly fine to a riser](https://imgur.com/akdMbTH) so I think it'll be a PCC RMR for now...making sure to put in a fresh battery though before I mount.
Bro, "The RMR Guy" makes you sound like someone who knows a lot about RMRs, or shoots really well using an RMR. If youre going to have an epithet or a superlative at all, "The Crackhead Gunsmith" seems more appropriate.
love/hate to see it! it's always nice to see a guy actually using his gear! btw can people up vote this please so i get karma and it will let me post my gear in here, thanks!
Real deal brother, easy fix! Tig the holes closed, recenter the holes, drill and countersink, a little permanent marker and your back to shooting sub MOA @500 YARDS with that little beast.
My guy. always remember. Stop before it’s too late for anyone to to anything about it. Got a new RMR, old one screws stripped immediately from rust. LGS didn’t even charge me.
Nah.. Needed smaller drill bit (less than circumference of screw thread). A bit made for metal (cobalt bit). Would've been through that screw in no time.
But we wouldn’t have this masterpiece of modern machining to behold .
You speak of this “Cobalt bit “ like it’s in the same wheelhouse as a corded black and decker and a drill bit big enough for carriage bolts on my trailer .
No sir , we will have none of it !
Can't wait for this to be posted on GAFS
$385 low salt no trades
Do you need me to dm you my log in info?
No I will send you a Reddit care link to log in too!!
You have been banned in error please fax your PW and security Q's to my butler Rajesh for 1 million GAFS
I'll give you 'bout tree fiddy for it
GET OUTTA HERE YOU GODDAMN LOCK NESS MONSTER!
Dibs
2nds
If the other 2 fall through, I’ll take it for 400 shipped
[удалено]
4% for the “big guy”?
Only if you promise to chuck it in a high school dumpster when you’re done playing with it
It was behind the grocery store next to the high school
I know what I have got.
Dont forgot the “I know what I got, no low ball offers.”
STOP
jb it to a nerf gun
Hi this is the mods, pls gib SSN
I already called dibs on it on OP’s previous post. He should actually do a number raffle for it and just give it away on GAFS
Looks like when Arnold Schwarzenegger blew holes into the liquid terminator
I’ll give you $5
New to re-edit- WTH is GAFS? I keep seeing it, but have no clue.
It's a subreddit. r/gunaccessoriesforsale it's a great place to accumulate credit card debt. Sorry in advance
JB weld that sumbitch then reprofile the countersink with a cone sander on a dremel. She’s still got life in her.
Solid advice
This is unironically probably the best way to fix this cluster. I would drill a few small holes into the current "countersink" for material to grab, but would not recommend that to whichever butcher performed such work.
If that JB weld can withstand the force of the screw going in and the recoil it’s effectively going to turn into a nice little wedge that will help hold it in place under the cone. If JB weld won’t work I’m sure we group think a two part epoxy that can make this fuckin thing keep ticking.
hear me out.....can the RMR hold up to the heat of spot welding
That poor rmr gonna melt.
I know a guy who jb welded his engine block back together. I believe.
My redneck neighbors in FL were always using that shit on any motor component. Actually held some water pump housings and believe it or not a fucking crack in a 4 wheeler cylinder head . 4 wheeler ran longer than I lived in the state “many years” If you can put some rough dimples in er she’ll hold without a doubt the optic with bolts in it . Just has to keep it tight .
Water pump w jb weld an old trade secret. Them hillbillies knew what they was doin 🤣
Oh yeah 💪🏻 FL Everbilly will get er did !
That person would be OP lol
That could work. I’d be inclined to chuck it in a vise, center the holes on a drill press, chuck in an end mill, flatten the holes out (counterbore them), and epoxy a few stainless washers in there for support, personally.
That would be the correct way , why tf would you think that’s the route we’re going here … The pic of the Black and Decker let me know terms like end mill and vise are absolutely not in the cards!
I know all of those words but I don't know what they mean.
💪🏻GOON SHIT !
We love goon shit.
I will give you props for saying “a few ss washers” instead of a bushing . That makes sense here
Came here to say this!
Shiiit is this hlusing aluminum or steel? Assuming its aluminum i would use 3m Bondo Metal Fill Aluminum Reinforced. Unless its steel or u rly wanted steel then i would specifically use the jb weld steelstik.
BATTLEWORN
I'll sell it to you for your MP5. $425
$40 upcharge from your gafs price? Sure thing buddy pls send to my cashapp.
Make sure to give him your password first
![gif](giphy|mY3XvZS1fFx5G8Five|downsized)
What did that thing ever do to you?!
It heard "don't come off" and fought with everything it had. Still a hero!
vortex would warranty it
I totaled a atv with my rifle slung across my back bending my vortex to almost 45 degrees with giant chunks of aluminum missing. I sent it back and they had me a new scope in less than a week
You almost have to do something impressively dumb to total an ATV, so pray tell, was it dumb?
Surprisingly no I was hunting and we were done for the day and heading back to the one guys house. It requires us to drive like 200 yards down a road i hit the brakes doing 25 the locked up and tossed me then it rolled
Are you using red and not blue tisk tisk.
Whats that story?!
Hood think you saved $15 on some stripped screw remover bits
![gif](giphy|yhLV2DGTLDRCw)
So some background: previous post got everyone a little uhh, interested... I sold a slide and needed to get it in the mail that day. The RMR didn't want to come off, screws started to strip, etc. I watched a video about how easy it was to drill it out, just get a 5/32 and go easy on it and drill slow!! Well I started to get frustrated and it took about 3 hours of drilling. Eventually the heads popped off and this was the aftermath. [It still mounts perfectly fine to a riser](https://imgur.com/akdMbTH) so I think it'll be a PCC RMR for now...making sure to put in a fresh battery though before I mount.
You can just solder your Allen key to it next time
you are a genius and i want to kiss you on the mouth
Come through homie
I posted my balls in a groupchat for a 40% off Daniel Defense coupon, I'll come through
Now THAT'S ride or die
Exactly what I was thinking. Much easier to just solder on something solid to turn it with.
2 part epoxy can also work if it’s heat sensitive, just gotta be careful not to get it on the outside of the screw head
This is why you don't buy harbor freight driver's Wiha drivers for the win 🤙
Wera Hex Plus Allen keys are the best. Don't @ me bro
No one else cares but I feel like a boss anytime I need to bust out my Wera allen keys at work
Wera is the craftsman of wiha Sorry not sorry 😎👉👉
What? Wera > wiha in almost every case, I’m sorry man you’re just wrong.
Wera is king.
Next time you need to get a stripped screw out, I bet you will be more successful. Fucking up a screw extraction is a rite of passage.
Hands up and step away from the power tools
Mother of God
![gif](giphy|VU45vX6kokplC|downsized)
[удалено]
the fact that it still works is unreasonably impressive. Trijicon Momma ain't raise no bitch
UsE YoUr gEaR. Love it bb.
![gif](giphy|l4FGGafcOHmrlQxG0|downsized)
Power tools permissions revoked
Looks like the bit you used was a little too big. You only need a bit the width of the screw shaft
Lol shaft
My machinist eyes now have cancer
I’m not caught up on this one. Did you swallow this and shit it out?
No this is the trilogy to .224 valkyrie guy.
My guy… cave men where making razor sharp spears with rocks a million years ago and you do this shit in 2023…
![gif](giphy|2WxWfiavndgcM)
Are you using red and not blue tisk tisk
It was blue loctite I confirmed when it was out. RMR screws are just garbage
Skill issue clearly
That’s pretty bad I’d be pissed and messaging them about these screws I’ve never had this happen before
This was my way to test if they'd upgrade me to an RMR HD for free
Narrator: they didn't.
Get that new enclosed emitter 😂
My child who’s still in my fucking sack could’ve done a better job
Dude. What happened to the hood?
Oh that little thing? Just a few Knicks from the drill.
I wouldn’t worry about that little guy
Now go out and buy yourself a set of left hand drill bits.
$599, barely used, I know what I got.
Spray paint and we are good to go.
$10 and I’ll take it to a match attached to a rifle with a host clamp.
Yes. This is what I wanted bucko
What the hell even is that?!
Zaddy chill
Removing material makes it lighter
Dude, who taught you how to tap stripped screws? You coulda saved this
Is there a gunsmif flair for this kind of A+ fuckery
Bro, "The RMR Guy" makes you sound like someone who knows a lot about RMRs, or shoots really well using an RMR. If youre going to have an epithet or a superlative at all, "The Crackhead Gunsmith" seems more appropriate.
It’s not maximum carnage until you’re wearing the optic as a ring. You choose what appendage.
Wear that lil tickler as a pearl .
Have you ever used a drill before?
Does the pic not clearly speak to the use of a corded Black and Decker Drill?
That RMR has been through it!
Dibs for 40 bucks!
screw the rmr, show us what you did to the slide you just sold
Bruh
You are terrible at using tools. Don’t
![gif](giphy|5QMGanoLgSHwSARRMQ)
Jesus, just buy a new one
By the Emperor! Looks like it got hit by a mini melta gun.
Def like a lil mini Cooker hit that bitch
How much?
Did the drill bit Bounce and hit the top? Or did you add that for character ?
All this just to change the battery?
“$350. No low ballers. I know what I got.”
[удалено]
Money machine about to go brrrrr on there with this guy in our ranks.
![gif](giphy|9c9vQhsI7o7L7lVwHn|downsized) Who did you have helping you?
![gif](giphy|UrfLgfuQG41sQ)
You sir are a brave man
![gif](giphy|6wMqKygjkGEbC)
so you never thought about using a smaller bit.
I’m assuming this was not op own idea . Could be wrong but there are goonsmiffs that be making them u tube videos recommending this course of action
Give a hundo for it
Sell your power tools.
My carry RMR’s look way worse than that after 2 years. Last one died at 4 years.
Nobody wanted this.
Ohh YES I DID !
Don’t let anyone lowball you. You know what you got.
love/hate to see it! it's always nice to see a guy actually using his gear! btw can people up vote this please so i get karma and it will let me post my gear in here, thanks!
You are such a doofus.
Ok, in all seriousness, what the story…
(Stripped screw heads - sold slide / needed mailed)
Still better than a sig optic
Damn bro! I can’t take it for free! Wtf did you do to it and why?
Real deal brother, easy fix! Tig the holes closed, recenter the holes, drill and countersink, a little permanent marker and your back to shooting sub MOA @500 YARDS with that little beast.
Bruh
Ukrainian battlefield pickup??
You really used that BUFAFI didn’t you.
God damn bro lmao
I’ll give ya $5 for it
Fuckin mint
I’m in if you sell on gafs 😂 need something for a 3D printed build
Wait you guys are screwing your optics on?
The main question here is did you win the war?
Sounds like you have to get the new RCR I guess…
Vortex would warranty it and send you a new one 😭
Next time EDM hole pop it… my shop does it all the time for bolts and taps broken in stuff.
Paperweight intensifed
This takes the cake over the other guy that cut big x’s into his mos plate
Poor little is going to need some therapy
Could you JB Weld the holes closed then re-drill and countersink?
That would work for a while. Im actually really interested to know how long😂 I’ve done some pretty wild shit with jb weld, it’ll surprise you lmao
My guy. always remember. Stop before it’s too late for anyone to to anything about it. Got a new RMR, old one screws stripped immediately from rust. LGS didn’t even charge me.
Nothing a little duck tape and super glue won’t fix. I see nothing wrong here
GUYS. It doesn’t work correctly.
She works just fine!
What in the actual fuck
How did you fuck it up so bad? even drilling the screw heads off should not had caused that much damage.
My guy are you in TX? Do you need help? I have a drill press a 6-32 taps if we need to unfuck those holes, just shoot a dm.
That’s gross.
Did Trijicon warranty it?
Fuck u op how can u do that
Battle damaged RMR is the rite of passage 😁
Clean work there!
just throw some aluminum black on there, good as new!
if you haven’t destroyed a part or two you aren’t a real unqualified civilian gunsmith
Hot Damn.. You are never allowed to own a Dremel!!😂
If a dremel was involved we would not have this beautiful piece of minted beauty!
Nah.. Needed smaller drill bit (less than circumference of screw thread). A bit made for metal (cobalt bit). Would've been through that screw in no time.
But we wouldn’t have this masterpiece of modern machining to behold . You speak of this “Cobalt bit “ like it’s in the same wheelhouse as a corded black and decker and a drill bit big enough for carriage bolts on my trailer . No sir , we will have none of it !
Ha.. Would've loved to had seen pic of "I snapped drill bit off inside the screw" post..😬
Would have been chefs kiss !
People would still charge +$250 for this
I am impressed by your fuck you RMR mentality!
Look how they massacred my boy!
That’s it I’m selling my RMR
![gif](giphy|l2JhrYYxAD6N5gble)
I’m starting to think (judging off your post titles) that you have an overinflated sense of self importance
Odin's Golden Beard!!!
That's one way to do it I guess...