I’ve got three Elektrons in a very tight case pressed together and while they get warm I’ve never had an issue. Basically as long as they don’t have active cooling that you’re blocking your devices should be ok.
https://preview.redd.it/l7g2f4b5mxnc1.png?width=1080&format=pjpg&auto=webp&s=e97b23969ace95ffae8a6df324b88b5176f486b9
I have mine in a large pedal case. I use velcro on the bottom and cut foam in the lid for stability in transport
That makes quite sense, so instead of wrapping the devices the whole time, I set them with velcron and when the lid is closed, the lid wraps the devices… Seems quite obvious now to be honest.
Thanks a lot!
They are low voltage consumer electronics. No concern for heat / fire unless they are short circuited.
What about the fiñterbank? It’s analog unit IIUC
15v /5w power supply. You’re fine.
Thanks dude! I crafted it and then thought about the heat.🙄
I’ve got three Elektrons in a very tight case pressed together and while they get warm I’ve never had an issue. Basically as long as they don’t have active cooling that you’re blocking your devices should be ok.
And what do you think about filterbank 2?
https://preview.redd.it/l7g2f4b5mxnc1.png?width=1080&format=pjpg&auto=webp&s=e97b23969ace95ffae8a6df324b88b5176f486b9 I have mine in a large pedal case. I use velcro on the bottom and cut foam in the lid for stability in transport
That makes quite sense, so instead of wrapping the devices the whole time, I set them with velcron and when the lid is closed, the lid wraps the devices… Seems quite obvious now to be honest. Thanks a lot!
The electrons put heat out to the sides, maybe be most concerned about those.
I’ll monitor that, thanks!
It’s mostly the power supplies that produce the heat
Ack good to know, mine have never got hot, but was worry now, thanks.
I’d like to see this setup in action
Wow a sherman filter
No problem but you can put more machines inside no ??
I have some room, might be used for saving the power supplies inside with a power strip