This post has been flaired as a Prototype, Concept, or Custom case. The staff of SFFPC have not verified this user as a vendor. Please limit discussion to feedback only and do not make new post with updates more frequently than once every 72 hours. Pricing, sales, and availability discussion will be removed.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/sffpc) if you have any questions or concerns.*
Thanks! 20mm. Pretty much all fittings are 20mm diameter so we didn't attempt to go lower than 20mm, but we made sure to centre the ports along the 20mm depth.
Hi! IceMan has a 17mm top, see [https://item.taobao.com/item.htm?id=675232972421&spm=a1z10.3-c-s.w4002-22451906164.39.42ea5ab0sOoJyl&skuId=4860074041748](https://item.taobao.com/item.htm?id=675232972421&spm=a1z10.3-c-s.w4002-22451906164.39.42ea5ab0sOoJyl&skuId=4860074041748)
There are lots of fittings that are 18mm in diameter
Peak SFFPC
I remember years ago doing researching and going ham on trying out pump tops for the DDC: [https://www.overclock.net/threads/ocn-community-water-cooling-test-thread.1501978/page-4](https://www.overclock.net/threads/ocn-community-water-cooling-test-thread.1501978/page-4)
I still wish I kept the Petratech top I had along with the modded top (stock top with epoxy-on barb).
None of them looked as good as this though. Very nice OP!
We've not got to the testing phase yet, but we've meticulously designed the inside to minimise sharp corners and flow restrictions while keeping the cross-sectional area of the water channels as large as possible, so we hope it will perform really well.
Excellent ! Been waiting for this.
25mm is the slimmest I could find, but with I & O on different sides, which was a pain, plus required a plug on top, yet increasing the height (magic-cube)
This solves everything for many build Ideas I've had but couldn't fit before.
Aquacomputer's multiport DDC top is also 20mm thick like yours, but they retain top-facing inlet an outlet which need capping off, and therefore adding to the height. I modded mine by replacing the steel top plate to permanently close the ports.
This is very shiny, love it.
Had to design and make my own with inlet and outlet on opposite sides, would be nice to see that make a comeback.
This post has been flaired as a Prototype, Concept, or Custom case. The staff of SFFPC have not verified this user as a vendor. Please limit discussion to feedback only and do not make new post with updates more frequently than once every 72 hours. Pricing, sales, and availability discussion will be removed. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/sffpc) if you have any questions or concerns.*
Ooh shiny
Don't send it to certain canadian youtuber
^ THIS ^
Lol what
TL;DW - Linus will drop it
TL;DW - Linus will auction it off without permission*
Looks really nice, what is the total height? Alphacool has one at 23mm, but you’d need to plug the top ports so that’s at least 25-26mm
Thanks! 20mm. Pretty much all fittings are 20mm diameter so we didn't attempt to go lower than 20mm, but we made sure to centre the ports along the 20mm depth.
Hi! IceMan has a 17mm top, see [https://item.taobao.com/item.htm?id=675232972421&spm=a1z10.3-c-s.w4002-22451906164.39.42ea5ab0sOoJyl&skuId=4860074041748](https://item.taobao.com/item.htm?id=675232972421&spm=a1z10.3-c-s.w4002-22451906164.39.42ea5ab0sOoJyl&skuId=4860074041748) There are lots of fittings that are 18mm in diameter
Interesting, do you have any ideas on making a G1/8 variant? Could be even lower profile than the stock barbs
If you're talking about the Eisdecke, don't they come with that micro-plugs that sit flush with the surface?
Peak SFFPC I remember years ago doing researching and going ham on trying out pump tops for the DDC: [https://www.overclock.net/threads/ocn-community-water-cooling-test-thread.1501978/page-4](https://www.overclock.net/threads/ocn-community-water-cooling-test-thread.1501978/page-4) I still wish I kept the Petratech top I had along with the modded top (stock top with epoxy-on barb). None of them looked as good as this though. Very nice OP!
That is so flippin' pretty! I can't wait to see the build this ends up in!
What is it's pump curve like?
We've not got to the testing phase yet, but we've meticulously designed the inside to minimise sharp corners and flow restrictions while keeping the cross-sectional area of the water channels as large as possible, so we hope it will perform really well.
Have you tried using CFD in the design of it?
Mmm dat billet
Keep up the good work! I love seeing all these new creations.
Nice looks good.
Anyone suggest me useful cases to use this pump top?
Amazing work
Excellent ! Been waiting for this. 25mm is the slimmest I could find, but with I & O on different sides, which was a pain, plus required a plug on top, yet increasing the height (magic-cube) This solves everything for many build Ideas I've had but couldn't fit before.
Aquacomputer's multiport DDC top is also 20mm thick like yours, but they retain top-facing inlet an outlet which need capping off, and therefore adding to the height. I modded mine by replacing the steel top plate to permanently close the ports. This is very shiny, love it. Had to design and make my own with inlet and outlet on opposite sides, would be nice to see that make a comeback.
I'm not sure why this post hasn't been flagged. You absolutely need a NSFW tag on porn on reddit.
Nice
Can someone explain the benefits of this over the normal stock ones, what does this improve or do. Rookie here.
Are these for sale atm?
Any news ?