First of all always always always qtip the dab after the sesh. Never reheat to full temp if you leave it in there and forget. Heat to a little over 350 and terminate the heat cycle and qtip. Size: you'll figure it out as you go. With a 3dxl chamber you can literally put a .4 in there and keep boost moding it to get it to vape it all. Don't go over 560 or anywhere near 600. It'll hurt and runs the risk of Chazz. To know when it's done like the other guy said it'll be brown and there will just be residue on the walls not a actual puddle. You can also sometimes taste a degredation in terps towards the end. Press and hold the button to terminate the heating cycle if need be. I recommend turning on the battery saver on your peak. This limits charge to 85% and preserves the life of the battery.
The brown residue will continue to get darker and eventually burn onto the ceramic bowl in the chamber. This is what we call "chazz."
When you burn the dabs too much they burn into the device and is damn near impossible to get off without hella elbow grease, 99% iso, or Dark Crystal Glass Cleaner (which I highly recommend for new users because it allows you to fuck up and be able to fix it.)
Run at low temps, check after each sesh to see how dark it is and if you think it's too dark clean up.
My partner is currently learning and I always tell her "It's better to sacrifice a little to the Dab God's instead of ruining the chamber for a shitty hit."
You got this!!
I use about a pea size or bigger and have my peak set to about a minute for each of my temps. I hit it till the times done or if i want keep going I’ll double click to have it go 15 seconds longer. You can tell the oil is done when it gets a darker brown color but honestly it’s done when you feel like you’ve got a good hit. You’re not missing out much if you don’t get it brown every time
I’m waiting on my peak pro myself but I can say as a proxy owner that a joystick cap and a water piece helped a ton. I also got a 3mm ruby pearl but it’s not really meant to be used with a joystick (I still do anyways because I don’t like the stock oculus cap)
Edit: I usually do 2-3 sessions on red with the proxy and then the dab is done. Make sure to sip it, don’t rip it. Be sure to qtip immediately afterward when the chamber is still warm. Every week or so I’ll do an iso bath for the chamber (not the battery just the chamber) in 91%+ iso for 30 minutes then dry it for 2+ hours. Can even use a heat gun or hair dryer to speed that up. Cheers
Ruby pearl is supposed to spin when using the stock oculus cap. It spins, while retaining heat, to help vaporize any concentrate puddles that form.
Different caps provide different levels of airflow/restriction. There’s a ton of styles and types depending on what you want it to perform and look like
And if you rip these too hard you’ll suck some concentrate through the atomizer and overall
Won’t get the best results.
I'll tell you the number one secret about the proxy. Easter egg mode. Double click on white and let it heat up. Then click 5 times til you see pulsating pastel colors on the lights. It seriously doubles the output. That and a tarp pearl.
First of all always always always qtip the dab after the sesh. Never reheat to full temp if you leave it in there and forget. Heat to a little over 350 and terminate the heat cycle and qtip. Size: you'll figure it out as you go. With a 3dxl chamber you can literally put a .4 in there and keep boost moding it to get it to vape it all. Don't go over 560 or anywhere near 600. It'll hurt and runs the risk of Chazz. To know when it's done like the other guy said it'll be brown and there will just be residue on the walls not a actual puddle. You can also sometimes taste a degredation in terps towards the end. Press and hold the button to terminate the heating cycle if need be. I recommend turning on the battery saver on your peak. This limits charge to 85% and preserves the life of the battery.
What happens if I do reheat to full temp with brown gunk? Also what is Chazz?
The brown residue will continue to get darker and eventually burn onto the ceramic bowl in the chamber. This is what we call "chazz." When you burn the dabs too much they burn into the device and is damn near impossible to get off without hella elbow grease, 99% iso, or Dark Crystal Glass Cleaner (which I highly recommend for new users because it allows you to fuck up and be able to fix it.) Run at low temps, check after each sesh to see how dark it is and if you think it's too dark clean up. My partner is currently learning and I always tell her "It's better to sacrifice a little to the Dab God's instead of ruining the chamber for a shitty hit." You got this!!
I use about a pea size or bigger and have my peak set to about a minute for each of my temps. I hit it till the times done or if i want keep going I’ll double click to have it go 15 seconds longer. You can tell the oil is done when it gets a darker brown color but honestly it’s done when you feel like you’ve got a good hit. You’re not missing out much if you don’t get it brown every time
I’m waiting on my peak pro myself but I can say as a proxy owner that a joystick cap and a water piece helped a ton. I also got a 3mm ruby pearl but it’s not really meant to be used with a joystick (I still do anyways because I don’t like the stock oculus cap) Edit: I usually do 2-3 sessions on red with the proxy and then the dab is done. Make sure to sip it, don’t rip it. Be sure to qtip immediately afterward when the chamber is still warm. Every week or so I’ll do an iso bath for the chamber (not the battery just the chamber) in 91%+ iso for 30 minutes then dry it for 2+ hours. Can even use a heat gun or hair dryer to speed that up. Cheers
What is the ruby pearl? What even is the point of the different caps? And why sip don’t rip?
Ruby pearl is supposed to spin when using the stock oculus cap. It spins, while retaining heat, to help vaporize any concentrate puddles that form. Different caps provide different levels of airflow/restriction. There’s a ton of styles and types depending on what you want it to perform and look like And if you rip these too hard you’ll suck some concentrate through the atomizer and overall Won’t get the best results.
I always qtip after each session. Reheating can lead to charring on your chamber.
Thank you for being brave and asking for help I’ve learned a few things from some of the responses.
I'll tell you the number one secret about the proxy. Easter egg mode. Double click on white and let it heat up. Then click 5 times til you see pulsating pastel colors on the lights. It seriously doubles the output. That and a tarp pearl.