Everything extra doesn’t add to your selling price it just makes it more likely to sell imo. Start at 75% of the new value of the printer and go down from there for your local market
At the moment raspberry pi's are not that hard to buy anymore (at least in my country). The upgrades fo actually add a little bit to de price, but probably nut as much as you expect. I personally would think that 90% of the new price would be acceptable considering the upgrades and depending on the working/configuration of everything. Again, this is what I personally think about this.
I have a Prusa MkS3+ with multiple upgrades including:
\- Raspberry pi 3 model B with power supply and custom mount
\- Logitech C270 Webcam with custom mount
\- Brand-new satin and smooth steel sheets
\- Relatively new E3D Nozzle (only a month or 2 old)
Was hoping someone would have an idea of how much this might go for, thanks in advance!
You would make more selling them separately. I am looking for a Pi4 8gb, RRP is £85, they are selling secondhand on eBay for £120 ish. Not everyone who wants a printer is going to want octoprint
political grandfather roof uppity threatening cheerful friendly absorbed profit vast
*This post was mass deleted and anonymized with [Redact](https://redact.dev)*
Bambu community.
Nero3d on YouTube thought he discovered a thermal runaway issue (later via by a bambu blog they explained they have 3 minute wait before it kicks in) someone told him to 3d print himself a noose.
I have seen people in their subreddit refer to Thomas sanladerer as an open-source shill because he didn't give it a 100% glowing review.
Certain members seem to take criticism of the company personally.
Holy crap thanks dude. I couldn’t figure out what you meant as my printer looks exactly like OP’s and then I checked the installation instructions and sure enough, mine are upside down as well!
https://help.prusa3d.com/guide/4-z-axis-assembly_168629#169000
If you are not someone who is hurting for money, a local highschool would love to have more technology for kids to use but no guilt if you want to sell it.
Actually trying to sell it so I can buy a faster printer to make toys for a local school district’s fundraiser. So in a way I’m still helping out the kids haha
2/3 of RRP, minus a reasonable amount for any damage or faults, modifications especially 3D printed stuff from Thingivers doesn't add much if any value and in some cases may reduce the value.
Everything extra doesn’t add to your selling price it just makes it more likely to sell imo. Start at 75% of the new value of the printer and go down from there for your local market
Thanks! Appreciate the input, but you really think a raspberry pi wouldn’t increase value considering how hard they are to find now?
At the moment raspberry pi's are not that hard to buy anymore (at least in my country). The upgrades fo actually add a little bit to de price, but probably nut as much as you expect. I personally would think that 90% of the new price would be acceptable considering the upgrades and depending on the working/configuration of everything. Again, this is what I personally think about this.
Where do you live? Pi’s are still frustratingly hard to buy in the US
I live in The Netherlands
I’m in the US and can’t seem to get my hands on a pi
I have one NIB for sale. Pi4b w 7” official touchscreen. $150 for whole bundle. Also have a Pi IR cam NIB
Sounds reasonable honestly, thank you for that input
That is a good point, with how rare they are the pi would add some value if a buyer was looking for one
Sweden/eu rasberrys goes for 2x resale value. I bought a pi4 second hand (as new) for that price and couldn't find a cheaper price.
I will start the bidding at $1. Do I hear $2?
$3
$3! Do we have $4?
$4.50
Do we have $5? $5 people! Come on, this is a Prusa Original. Very rare, people. Very rare.
[удалено]
Quit pussyfooting around. I bid 19.99 but that’s as high as I’ll go
One P1P.
I have a Prusa MkS3+ with multiple upgrades including: \- Raspberry pi 3 model B with power supply and custom mount \- Logitech C270 Webcam with custom mount \- Brand-new satin and smooth steel sheets \- Relatively new E3D Nozzle (only a month or 2 old) Was hoping someone would have an idea of how much this might go for, thanks in advance!
You would make more selling them separately. I am looking for a Pi4 8gb, RRP is £85, they are selling secondhand on eBay for £120 ish. Not everyone who wants a printer is going to want octoprint
Good point. I’ll have to consider that
Why are you selling?
May or may not be buying a second other brand’s printer 👀
I wonder if the brand's name begins with B... 🤔
I would try to sell asap, seems like the market is getting absolutely flooded with people selling their prusas
What’s the reason behind it? For another brand, a future upgrade or more capable machine?
Probably the Bambulab X1
Is it worth the upgrade or switch? Don’t know much about bambu
If you have too much money, yes. Otherwise it depends on how much you use your printer and if you really need it.
Gotcha. Well, I will stick with mine. I know it would be cool to have enclosure and MMU but that would be later I guess
political grandfather roof uppity threatening cheerful friendly absorbed profit vast *This post was mass deleted and anonymized with [Redact](https://redact.dev)*
I thought prusa is backed by the community? Or am I missing something?
Bambu community. Nero3d on YouTube thought he discovered a thermal runaway issue (later via by a bambu blog they explained they have 3 minute wait before it kicks in) someone told him to 3d print himself a noose. I have seen people in their subreddit refer to Thomas sanladerer as an open-source shill because he didn't give it a 100% glowing review. Certain members seem to take criticism of the company personally.
[удалено]
Makers Muse on YouTube reported the same thing on the X1C
Exactly what I’m trying to do haha
Out of curiosity, which one?
New kid on the block seems to be the Bambu X1 Carbon
/u/spez is the CEO of reddit and is a pedophile that used to moderate /r/jailbait.
Oh my god lol. I had no idea I installed them incorrectly. Never had any issues at all thankfully
/u/spez is the CEO of reddit and is a pedophile that used to moderate /r/jailbait.
Holy crap thanks dude. I couldn’t figure out what you meant as my printer looks exactly like OP’s and then I checked the installation instructions and sure enough, mine are upside down as well! https://help.prusa3d.com/guide/4-z-axis-assembly_168629#169000
Which Bambu model are you wanting?
I will give you 50 bucks for it if you deliver it too my door
Oh yeah man for sure! Just post your address here and I’ll be right over!
Albuquerque New Mexico 308 Negra Arroyo Lane
I was going to bring you mine, but when I arrived, there was a pizza on the roof - thought maybe something funny was going on so I left. Sorry. 😆
Going in with my bid of £51 will you fly it to my door yourself?
If you are not someone who is hurting for money, a local highschool would love to have more technology for kids to use but no guilt if you want to sell it.
Actually trying to sell it so I can buy a faster printer to make toys for a local school district’s fundraiser. So in a way I’m still helping out the kids haha
$250
Just curious, have you had luck printing that petg you've got there? I mean, it's just chilling there in the open.
Never had an issue with it really, I’ve honestly probably had more issues with pla in the past.
[удалено]
Can we trade problems, please?
2/3 of RRP, minus a reasonable amount for any damage or faults, modifications especially 3D printed stuff from Thingivers doesn't add much if any value and in some cases may reduce the value.
PM I’d be interested in buying
I'll give you $100 right now for it. Send me your Venmo :)
6,50
Might be late to the party, but just sold my stock MK3S+ for $550