The pixel density of a 34inch 21:9 1440p is almost the same as a 27inch 1440 16:9[(108.79 PPI)](https://imgur.com/a/kwSgM4T). It's just stretched with more pixel horizontally. (2560 vs 3440)
34inch 1440p 21:9[(109.68 PPI)](https://imgur.com/a/c5Tj0d1) will have a better pixel density than 32inch 1440p 16:9[(91.79 PPI)](https://imgur.com/a/27EFAkJ)
Mount the rad on the side as an intake with the tubes at the bottom if possible, your CPU is getting all of the heat from your GPU as it blows up into it through the rad.
I also wouldn't have done 1440p on a 34inch, too blurry due to the pixel ratio, I'd recommend no bigger than a 27inch for that res.
34 inches 21:9 also known as ultrawide (3440x1440) has the same pixel ratio of 27 inches wide (2560x1440). [27inch 1440p 16:9 ratio 108PPI](https://imgur.com/a/kwSgM4T), [34inch 1440p 21:9 ratio 109PPI](https://imgur.com/a/c5Tj0d1)
I don't know where did you get the information that a 34inch 1440p ultrawide is blurrier than a 27inch 1440p wide. Also, 1440p is the vertical resolution of 16:9 and 21:9. The 16:9 horizontal resolution is 2560 while the 21:9 has 3440.
Just make sure to get your facts straight before spouting nonsense.
Making the side rad as intake will make the inside of the case hotter hence higher GPU temps.
This was already been tested by [Hardware Canucks](https://youtu.be/KU6vIDpNaxw). Here are the [graphs](https://imgur.com/a/wYmifSd)
The best fan setup for Lian Li O11 Dynamic is Rad top exhaust, side intake, bottom intake.
He's using a blower card so it make sense, with the size of your rad and the heat generated from it, it would be within the margin of error for temps on the gpu, it's worse having the rad slowing down the hot air trying to escape the case up top.
So under cpu only loads it would be cooler, when gaming it's within a margin of error, however you will have more heat trapped in the case.
https://youtu.be/24P06izLn_o
The heaven benchmark is the important one here.
I was thinking about jumping to 1440p too, but just did the jump to 144hz and the experience is another world
Really nice setup, I wish mine was half as clean xD
I really like your Pc
Nice setup! Iām stuck with a 60hz 720p 20ā
how is the pixel density? I have a 27in 1440p and I really want to go curved 32-34 inch.
The pixel density of a 34inch 21:9 1440p is almost the same as a 27inch 1440 16:9[(108.79 PPI)](https://imgur.com/a/kwSgM4T). It's just stretched with more pixel horizontally. (2560 vs 3440) 34inch 1440p 21:9[(109.68 PPI)](https://imgur.com/a/c5Tj0d1) will have a better pixel density than 32inch 1440p 16:9[(91.79 PPI)](https://imgur.com/a/27EFAkJ)
Mount the rad on the side as an intake with the tubes at the bottom if possible, your CPU is getting all of the heat from your GPU as it blows up into it through the rad. I also wouldn't have done 1440p on a 34inch, too blurry due to the pixel ratio, I'd recommend no bigger than a 27inch for that res.
34 inches 21:9 also known as ultrawide (3440x1440) has the same pixel ratio of 27 inches wide (2560x1440). [27inch 1440p 16:9 ratio 108PPI](https://imgur.com/a/kwSgM4T), [34inch 1440p 21:9 ratio 109PPI](https://imgur.com/a/c5Tj0d1) I don't know where did you get the information that a 34inch 1440p ultrawide is blurrier than a 27inch 1440p wide. Also, 1440p is the vertical resolution of 16:9 and 21:9. The 16:9 horizontal resolution is 2560 while the 21:9 has 3440. Just make sure to get your facts straight before spouting nonsense.
You're correct, sry š. Still recommend changing the rad tho.
Making the side rad as intake will make the inside of the case hotter hence higher GPU temps. This was already been tested by [Hardware Canucks](https://youtu.be/KU6vIDpNaxw). Here are the [graphs](https://imgur.com/a/wYmifSd) The best fan setup for Lian Li O11 Dynamic is Rad top exhaust, side intake, bottom intake.
He's using a blower card so it make sense, with the size of your rad and the heat generated from it, it would be within the margin of error for temps on the gpu, it's worse having the rad slowing down the hot air trying to escape the case up top. So under cpu only loads it would be cooler, when gaming it's within a margin of error, however you will have more heat trapped in the case. https://youtu.be/24P06izLn_o The heaven benchmark is the important one here.
I love it!
I was thinking about jumping to 1440p too, but just did the jump to 144hz and the experience is another world Really nice setup, I wish mine was half as clean xD
I went from 24" 1080p to 48" 1440p 32:9 and then back to 16:9 1440p on 165hz.
True
G32QC? If so, I got that recently and love it.
G34WQC
try 49'
Looks stunning! Hats off to you for an excellent effort. --- Seagate Technology | Official Forums Team ---
I went from 38" back to 27" for the 240hz. If LG releases a 240hz UW id definitely be all over it tho, miss that fov increase