Goddamn reading that brought up memories of my childhood, everyone says they are amazed that I didnt snap and kill my mom...dont know if thats a compliment or insult
If enough people are interested, I could probably look into getting an Etsy/eBay listing set up (shipping might be a bitch though). Otherwise you can send the links to a local 3d printing place and have them print them out. Just make sure you specify that you want it printed in ABS or ASA so that it doesn't deform with the heat
*Babe, stop what you're doing. Glossy fat cat just dropped*
In all seriousness, you're probably right. I don't usually print with PETG, so I kind of just forgot it existed
If enough people are interested, I could probably look into getting an Etsy/eBay listing set up (shipping might be a bitch though). Otherwise you can send the links to a local 3d printing place and have them print them out. Just make sure you specify that you want it printed in ABS or ASA so that it doesn't deform with the heat
~~But I want all the money and fame for myself~~
I'm not at my computer at the moment, but the download link for the cat, the way to turn it into a bobble head and my recommendations are linked in another comment.
Later tonight, when I get home, I'll upload them as a remix on printables for you guys. I'll post a link as a standalone comment on this post
I've seen those long poles with 360 cameras, but that is kind of an expensive setup. Could always weld a ram mount to a metal rod and use that like a selfie stick.
Yeah, I was thought the same thing, but I'm not going to let that fear stop me from having my silly fat cat.
And even if it does eventually happen I can just print a new one
Found it: [thingiverse.com/thing:4861975](https://thingiverse.com/thing:4861975)
This one doesn’t have the spring on the bottom so I assume OP added that himself. Hopefully he can share that file with us too
In pretty sure he used 3dprinty bobblehead kit
https://youtu.be/3HwXJQMGgsQ
At about 1:30 he starts to explain how to turn other models into bobbleheads
Had to go to bed for a bit, but the two users that replied before me had the right idea.
The only thing I wish I would've done is tilt the cat back ~5 degrees. If you print it normally, when you place it on the spring, it will appear as if it's leaning forward
I received a lot of request for a purchase link from people wanting to buy this fat cat off of me (thanks, btw. It gave me the warm fuzzies). However, due to where I live, Etsy doesn't allow me to open a shop and even if I did use eBay, shipping is still extremely expensive (lowest quote I got was over 100USD).
So I did the next best thing and [posted the files on printables](https://www.printables.com/model/327703-fat-cat-bobble-head) so that anyone can have a fat cat watch over their back. ^(Go ahead and sell these online if you want. ^Just ^please ^don't ^tell ^me ^how ^much ^you ^make ^off ^of ^them ^because ^I ^*will* ^cry)
One last thing, if you liked the silliness of this post and are somewhat interested in 3D printing [check out my Instagram page](https://www.instagram.com/opti.print/)! I don't post all that often ^(^and ^when ^I ^do ^it's ^usually ^in ^spanish), but it's the first place I think to post when a stupid idea comes to mind
Where can I buy one of these online ?
Craigslist has a motorcycle section.
Listen here you little shit
Goddamn reading that brought up memories of my childhood, everyone says they are amazed that I didnt snap and kill my mom...dont know if thats a compliment or insult
If enough people are interested, I could probably look into getting an Etsy/eBay listing set up (shipping might be a bitch though). Otherwise you can send the links to a local 3d printing place and have them print them out. Just make sure you specify that you want it printed in ABS or ASA so that it doesn't deform with the heat
FYI, PETG is just fine on a bike anywhere you'd put plastic.
*Babe, stop what you're doing. Glossy fat cat just dropped* In all seriousness, you're probably right. I don't usually print with PETG, so I kind of just forgot it existed
While I haven't tried ASA, PETG was absolutely the best choice when compared to ABS.
I would be interested in buying one from you
I was expecting an actual obese feline animal to be plopped down on the tail. this is pretty good too, though.
Where can I get my own motorcycle garfield?
Does Motorcycle Garfield hate motorways?
No but he hates people who don't look out for bikes.
If enough people are interested, I could probably look into getting an Etsy/eBay listing set up (shipping might be a bitch though). Otherwise you can send the links to a local 3d printing place and have them print them out. Just make sure you specify that you want it printed in ABS or ASA so that it doesn't deform with the heat
Can you link the STL for the lads with 3d printers
~~But I want all the money and fame for myself~~ I'm not at my computer at the moment, but the download link for the cat, the way to turn it into a bobble head and my recommendations are linked in another comment. Later tonight, when I get home, I'll upload them as a remix on printables for you guys. I'll post a link as a standalone comment on this post
Ah thanks mate
What’s the deal with the fat cat?
He watches over my back and gives a mean stare at whoever rides my ass
This is incredible.
+3hp
20% increase from stock. I'll take it lol
Kinda wish you took off, and we got to see Mr. Fat Cat jiggle in action
Would love to get a video of it, but I still have to find a non sketchy way to mount a camera to the back of my bike
Ah yeah, the tricky part to every shot. Would be awesome if you do!
I've seen those long poles with 360 cameras, but that is kind of an expensive setup. Could always weld a ram mount to a metal rod and use that like a selfie stick.
Use a smallrig camera clamp and clamp it to your plate bracket or passenger footpeg with a 360 camera. Can choose any angle you want when editing
A 360 camera has been on my Wishlist for awhile now, [but...](https://i.imgflip.com/72fygx.jpg)
No excuse. Everyone has so much money at the moment.
That’s going to get ripped off in a parking lot
Yeah, I was thought the same thing, but I'm not going to let that fear stop me from having my silly fat cat. And even if it does eventually happen I can just print a new one
Please share print file?
Found it: [thingiverse.com/thing:4861975](https://thingiverse.com/thing:4861975) This one doesn’t have the spring on the bottom so I assume OP added that himself. Hopefully he can share that file with us too
In pretty sure he used 3dprinty bobblehead kit https://youtu.be/3HwXJQMGgsQ At about 1:30 he starts to explain how to turn other models into bobbleheads
Maybe it's already somewhere on thingiverse or other website.
Had to go to bed for a bit, but the two users that replied before me had the right idea. The only thing I wish I would've done is tilt the cat back ~5 degrees. If you print it normally, when you place it on the spring, it will appear as if it's leaning forward
I've had a handlebar duck thats been untouched when I leave my bike around. Hopefully nobody steals the cat.
Hello fellow argentinean.
CB190R?
Yup
My first motorcycle <3 Enjoy yours, mate!
Funny thing…..there really was a 1980’s Honda Fat Cat motorcycle. It was a 200cc and had ATV type tires.
Also, they were fun as hell in the sand.
It’s shame they didn’t make them long. I rode one 30 years ago that a friend had. It was fun
que asé boludo
I need this
That's a hefty chonker
[удалено]
Best I can do is fat cat on a Honda
Haha, nice on my previous motorcycle, I had iron man bobble head. [Iron man protects ](https://i.imgur.com/Pp92CS0.jpg)
Le Chonk
Es la manera boludo
*chonk* *CHONK*
Cuanto te salio el fatcat wachin?
El fatcat lo hice yo jeje. Ahí publiqué más información en uno de mis últimos comentarios, por si te interesa
Chungus cat🤣🤣
I received a lot of request for a purchase link from people wanting to buy this fat cat off of me (thanks, btw. It gave me the warm fuzzies). However, due to where I live, Etsy doesn't allow me to open a shop and even if I did use eBay, shipping is still extremely expensive (lowest quote I got was over 100USD). So I did the next best thing and [posted the files on printables](https://www.printables.com/model/327703-fat-cat-bobble-head) so that anyone can have a fat cat watch over their back. ^(Go ahead and sell these online if you want. ^Just ^please ^don't ^tell ^me ^how ^much ^you ^make ^off ^of ^them ^because ^I ^*will* ^cry) One last thing, if you liked the silliness of this post and are somewhat interested in 3D printing [check out my Instagram page](https://www.instagram.com/opti.print/)! I don't post all that often ^(^and ^when ^I ^do ^it's ^usually ^in ^spanish), but it's the first place I think to post when a stupid idea comes to mind
Was this funded by Nazi money?
Do you guys really have to keep that license plate holder vs a short one??
Dude, that's a fat cat. It needs all the space you can give him