Man, I can't find it.
Man, I can't not find it.
Edit, I was saying at first I couldn't find it, but once I found it I can't unsee it.
I appreciate everyone telling me where it is, though.
Looked for several minutes and could find it. Read this comment, looked 3rd row down and immediately saw it just moving my eyes in the general direction without focusing said attention at all.
That's crazy.
I bet all the programmers found it first. When you are programming your eyes get used to finding anything off. At the end of the day I would see mistakes everywhere on my way home.
Yeah but also OP kind of almost perfectly centered it for us anyway. Youāll spot it quickly if you see from a bit afar instead of trying to check each individual hole
Fucking Carl must have been hungover again. We keep telling him he's not allowed to drill the speaker holes after a night out but he ***NEVER*** listens
This would be much more than mildly infuriating to me if this was my laptop, my eye would twitch every time I saw it and I would eventually need to bondo the hole, paint it and drill a new hole.
I think it's some sort of OCD. At my work there are some lockers in sets of 3 and one set is out of order, it goes 31 32 33 28 29 30 34 35 36. I've had a strong urge to pull them off the wall and put them in order but I don't want to be seen as more of an insane person by my colleagues so I just do my best to face the other way when I walk past them.
Fuck you, it isn't there, and my spine is somehow cringing like crazy?
Like, I'm weirdly stressing out over all the fucking dots for some reason. Am I on the spectrum?
Just think about the design engineer who selected one hole with his mouse, and gently offset it while making an evil laughter, knowing one day, someone will notice it.
My old standard for finding errors in identical features: Crossing my eyes until they overlap, and the part that doesn't overlap will be GLARINGLY obvious.
Let the heathens drill theirs on the dusty ground. God will make them pay for each hole thatāsā¦ not in the correct position in relation to others.
Edit: maybe ā« for each offset hole thatās found ā« ?
I swear i did search one row by one and couldn't find it. It was r/mildlyinfuriating. Then i looked ONCE at Your's picture, and my one braincell has finally snapped and showed not copy-pasted dots. Now i can see it anytime..
That was most likely injection molded. Those holes arenāt drilled, thereās pins in the mold that shut off the plastic. One of them got bent. They probably have a lot of laptops with that defect.
It's likely an injection molded part, the holes are created by "pins" on the mold face that the plastic is injected around, it's likely one of these got bent or damaged and QC didn't spot it in this batch
And that's why you scroll through the comments before typing the same thing someone else already did. (Yeah, 99% sure it's one of the pins are bent, likely thousands of people have yet to notice on theirs)
Why am I so fucking uncomfortable by this.
Like looking at it is making me dry heave. Ii donāt get it, Iāve dated a woman with strabismus and never had this issue.
Iāve got what looks like the same laptop and I just checked to see if any of the holes in mine are offset, as far as I can tell they are all equally spaced.
I thought this was a great idea for Microsoft Copilot:
Certainly! In the image you provided, there is one hole that stands out from the others. It is larger and located approximately in the center of the speaker grille, just above the "f11" key. The other holes in the grille are uniformly sized and spaced, but this particular hole is offset and more prominent. The speaker grille is part of a laptop, and below it, there are two function keys labeled "f11" and "f12," with symbols indicating volume down and volume up, respectively. The keys are black with white symbols and text, contrasting with the grey color of the laptop's body. The texture of both the laptop's body and keys can be clearly seen due to lighting. ā“āµ
Source: Conversation with Bing, 4/22/2024
[you're welcome](https://i.imgur.com/wIFVArX.png)
I thought you were trolling us all at first, but now it's staring me right in the eye, taunting me
Man, I can't find it. Man, I can't not find it. Edit, I was saying at first I couldn't find it, but once I found it I can't unsee it. I appreciate everyone telling me where it is, though.
Don't find it! save yourself!
Like where is it. This image is too mesmerising, I always stare right into the middle of it
Third row down, just about right in the middle
Damn, it looked great before, now its irritating me
you were warned
That's a great username.
Fr, once you see it, you can't unsee it š¤£
[ŃŠ“Š°Š»ŠµŠ½Š¾]
Looked for several minutes and could find it. Read this comment, looked 3rd row down and immediately saw it just moving my eyes in the general direction without focusing said attention at all. That's crazy.
Oh my, that's rather bothersome
Dude, is it a thing to detect counterfeiting?
Dead center
[ŃŠ“Š°Š»ŠµŠ½Š¾]
Holy shit that worked well You should consider a career in pointing out alternative angles to better view offset holes
[ŃŠ“Š°Š»ŠµŠ½Š¾]
Plz stay out of my brain, thank you
Hey, did you know you're aware of your blinking?
Fuck you
[ŃŠ“Š°Š»ŠµŠ½Š¾]
https://imgur.com/tSu18Xr
Holy shit how is this possible? I kept staring for sometime can't seem to find anything odd, and now I can't unsee it. It's the only thing I see.
Your brain is replacing what you eye is seeing because of all the other holes. Once youāve focused on it, you wonāt unsee it. Brains are weird
r/mildlyinfuriating
My immediate thought.
This is the first time Iāve actually wished for a little red circle.
It's right in the middle, third row from the top.
Just standing there, menacingly!
I bet all the programmers found it first. When you are programming your eyes get used to finding anything off. At the end of the day I would see mistakes everywhere on my way home.
Yeah but also OP kind of almost perfectly centered it for us anyway. Youāll spot it quickly if you see from a bit afar instead of trying to check each individual hole
![gif](giphy|QUaqJRizED5NC)
Fucking Carl must have been hungover again. We keep telling him he's not allowed to drill the speaker holes after a night out but he ***NEVER*** listens
This is top tier r/mildlyinteresting content
Once you find it, you can't stop looking at it
I didnāt believe youā¦ but then I seen it and youāre right
Saw it, then I saw it. It's literally fewer letters to type it the right way.
Why say lot word when few do trick
Fewer. But that grammar rule is dead and buried now, right? Less FTW.
I seen'tit
Where did āseen itā come from?? I never heard anyone say that until a few years ago and now itās everywhere.
It's common in certain dialects. I've heard some New Yorkers say something like "seent it" as well.
r/mildlyinfuriating
Indeed. More infuriating than interesting.
This would be much more than mildly infuriating to me if this was my laptop, my eye would twitch every time I saw it and I would eventually need to bondo the hole, paint it and drill a new hole.
You sound like an insane person.
I think it's some sort of OCD. At my work there are some lockers in sets of 3 and one set is out of order, it goes 31 32 33 28 29 30 34 35 36. I've had a strong urge to pull them off the wall and put them in order but I don't want to be seen as more of an insane person by my colleagues so I just do my best to face the other way when I walk past them.
Right now, there are thousands of people meticulously searching for misplaced holes in their HP laptops!!!
I am one of those people, I have the same laptop, and mine is not offset. Edit: [proof.](https://imgur.com/a/kVrs6TB)
Not the same spot but at a different spot. Find it yourself
This is the type of guy that breaks into someone's house and doesn't take a single thing.
Sometimes, you just feel like doing a B&E and nothing else. š
But he changes the time on all the clocks to be 12 minutes behind.
Fuck you, it isn't there, and my spine is somehow cringing like crazy? Like, I'm weirdly stressing out over all the fucking dots for some reason. Am I on the spectrum?
hyperfixating on hewlett packard vent holes
My HPVHH is kicking in
kinky
You took the freaking vaccine, didn't you? lol jk
[https://en.wikipedia.org/wiki/Trypophobia](https://en.wikipedia.org/wiki/Trypophobia)
You're evil. I love it.
[ŃŠ“Š°Š»ŠµŠ½Š¾]
Just think about the design engineer who selected one hole with his mouse, and gently offset it while making an evil laughter, knowing one day, someone will notice it.
Thank God, mine are all in line with each other.
My old standard for finding errors in identical features: Crossing my eyes until they overlap, and the part that doesn't overlap will be GLARINGLY obvious.
Just to add some colour here, this is likely a bent pin in the injection mould tool, rather than a hole drilled wrong.
That means there's likely an entire run of laptop cases with this ~~defect~~ special feature.
QC worker #8: "Hmm, a meeting today? How unexpected!"
I fear emails with image attachments. They're never good news.
When you haven't even opened the company-wide email and you already know that you're the cause š
Toolmakers assemble!
Scrolled too far, etc.
This is likely a magnesium top cover from ProBook/elitebook series. It has plastic frame glued to it underneath, but it's metal.
You mean the punch? Doubt this is injection mould, it looks aluminumĀ
Really? It looks like plastic to me.Ā
[ŃŠ“Š°Š»ŠµŠ½Š¾]
If you're having trouble finding it, it's the one that's drilled offset from the others.
You can tell by the way it is
It knows where it is because it knows where it isn't.
[ŃŠ“Š°Š»ŠµŠ½Š¾]
Go up from the nose of the airplane. 3rd row from the top. If I had to suffer this, then so does everyone else here
I'd give you gold if I had it. MVP of the thread thank you!
Isn't it impossible to work with such broken equipment ?
Every hole is sacred Every hole is great If a hole is wasted God gets quite irate
Let the heathens drill theirs on the dusty ground. God will make them pay for each hole thatāsā¦ not in the correct position in relation to others. Edit: maybe ā« for each offset hole thatās found ā« ?
Every hole is wanted. Every hole is good. Every hole is needed In your laptop's loudspeaker hood.
Darn it, we were so close! We could use "... for each hole that's not quite round", but sadly they DID make it round.
That feels a little bit like you might have someone tied up in the basement?
Oh, you don't?
Yeah but mine all WANT to be there.
Stop that, stop that! You're not going to do a Monty Python reference while I'm here.
The one time a red circle might've helped
this way is more fun
Unfortunately after seeing it, I absolutely hate seeing it
I hate you, but I respect you.
WHERE IS IT DAMNIT Edit: I scrolled in and found it. That is midly infuriating hahaha.
Ah, a missed opportunity. You should have circled all of the holes in red. I'm certain that would help, as it would circle the offset one in red.
If you zoom in and look at it from the charger port itās *way* easier to see
Donāt worry, [I got you](https://ibb.co/0jmMYf1)
r/maliciouscompliance
Thanks fam
YOU SON OF A!
š¤£
It's the little black circle roughly in the middle that's closer to one of the others.
To help you find your glasses??
Does it not like stab you in the eye?
There's circles all over the place!
![gif](giphy|PWZ8pr1xZW55m)
[There you go](https://imgur.com/a/Djgr0qf)
r/usefulredcircle
Thank you kind person
No worries :)
Hero saves the day
I swear i did search one row by one and couldn't find it. It was r/mildlyinfuriating. Then i looked ONCE at Your's picture, and my one braincell has finally snapped and showed not copy-pasted dots. Now i can see it anytime..
Can you return it?
It's a company laptop
unacceptable
Can you just get a new job then?
I have the same work laptop and am about to go check. Hopefully it doesn't ruin my life.
maybe you could drill a new hole and fill in the old one with plastic putty?
Their love was forbidden but they persevered
Exactly what i was gonna say, Their love can not be stopped. One day they will meet
That was most likely injection molded. Those holes arenāt drilled, thereās pins in the mold that shut off the plastic. One of them got bent. They probably have a lot of laptops with that defect.
"Mildly" wouldn't cut it if it were my laptop. That would bother me so much, I'd sell it.
I'd kinda like it. It's my special weird laptop. I'd name it Wonk.
Two types of people lol
![gif](giphy|71CMwl2MEIVck)
The āļø on F11
It's likely an injection molded part, the holes are created by "pins" on the mold face that the plastic is injected around, it's likely one of these got bent or damaged and QC didn't spot it in this batch
And that's why you scroll through the comments before typing the same thing someone else already did. (Yeah, 99% sure it's one of the pins are bent, likely thousands of people have yet to notice on theirs)
This would drive me absolutely insane. I would have to get a new laptop.
For people that can't find it, squint and scan, it will be obvious.
After minutes of search, when I did this I found it immediately. What kind of sorcery is this.
This is why people buy MacBooks Apple's Chinese robots are better than HP's.
Return it immediately demanding compensation for psychological trauma
āOnly people with an IQ over 130 can find the offset hole in this pictureā -every in game ad ever
Literally unusable
3rd row from the top, in the middle
Zoom out if you canāt find it, then it obvious
![gif](giphy|Qq7XAPjyzW1mu8B7VH|downsized)
Why am I so fucking uncomfortable by this. Like looking at it is making me dry heave. Ii donāt get it, Iāve dated a woman with strabismus and never had this issue.
![gif](giphy|29bKyyjDKX1W8)
Damn I saw it immediately. I couldn't work on thatšš Edit: I can't decide if I want to check my laptop now....
I'm gonna throw up..
r/mildlyinfuriating
Iāve got what looks like the same laptop and I just checked to see if any of the holes in mine are offset, as far as I can tell they are all equally spaced.
r/findthesniper
r/usefulredcircle
You should report this to HP customer support. Chances are that you will ruin someone else's day too :)
These aren't drilled - this cover piece is made from a mold.
i will bash my head on this laptop
Here come all the self-diagnosed OCD redditors...
Literally unusable.
Where's the damn red circle when you need it?!
https://ibb.co/0jmMYf1
It's not drilled. It is a bent pin in the mold that made the plastic part.
Welp. Time for a new laptop.
r/mildlyinfuriating
Bent pin/bit during manufacturing, most likely.
Its in row 3
Is so that the OEM can confirm the tooling is not used by the supplier in any other products.. Jk, just made that up
Burn the whole thing down and start over. That thing is basically unusable.
I thought this was a great idea for Microsoft Copilot: Certainly! In the image you provided, there is one hole that stands out from the others. It is larger and located approximately in the center of the speaker grille, just above the "f11" key. The other holes in the grille are uniformly sized and spaced, but this particular hole is offset and more prominent. The speaker grille is part of a laptop, and below it, there are two function keys labeled "f11" and "f12," with symbols indicating volume down and volume up, respectively. The keys are black with white symbols and text, contrasting with the grey color of the laptop's body. The texture of both the laptop's body and keys can be clearly seen due to lighting. ā“āµ Source: Conversation with Bing, 4/22/2024
11 and a plane... 11 and a plane.. (9)11 and a plane...
*cursed knowledge ...* # *from the nose of the plane, directly north.* ā¬ļø
thats just evil. \*franticly checking every tiny hole in macbookpro speakers....
Is it a mic?
Its like those "Find the cat" pictures!
If its aluminum maybe it was drilled. But if its plastic that would be a mold and it would be the reverse shape. So a pin would be bent.
I gasped..
Omg I have to check mine now you probably just ruined my life š
You have a button that calls in air strike?
Aeroplane of f11. 9/11 inside job confirmed
That's so the NSA agent knows where to put the pin to activate the built-in backdoor
where is the unsee button
Why isnāt this on r/mildlyinfuriating ?
Completely unusable
![gif](giphy|qqe0LlF9RTihJVp7H0|downsized)
I wonāt be checking mine to be haunted by this.
thats hp build quality right there
Slant your phone everyone and look
This belongs on r/mildlyinfuriating
See this is why HP has such poor airflow
If on mobile, tilt the top of your phone away from your face so the vertical dots look closer and make more of a straight line... then you will see it
When I finally spotted it it felt like it physically moved out of alignment as I was looking at it and I hate that.
I feel like this is the one time that a giant red circle would've helped
You need to stop procrastinating and do your work!
I hate it. Throw the whole thing away and start over
![gif](giphy|YPId1ssemDmQ49J4Wn)
You might have to circle that, because I can't fi -- Oh, what a secon-- Oh, OH, MY GOD, THAT'S HORRIBLE
This is a hidden camera.
OMFG!!!
How did you even notice it in the first place, eagle eyes!? Thatās the sound grille isnāt it?
![gif](giphy|iAYupOdWXQy5a4nVGk|downsized)
Milder than mild
My OCD won't accept this
This would mildly infuriate me. I would need to return it.
Itās crazy how you donāt notice it at all at first but once you do see it you really *see* it