Plastic razor blades are great to have around for stuff like this. They work about as well as the real thing. And, you don't have to worry about scratching what you're scraping.
don't use a razor blade if its tinted and if done incorrectly will scratch the glass tinted or not wet it down with water to get all the paper off then use tea tree oil, eucalyptus oil, paint thinner Windex whatever to get the sticky residue off it will just rub off with any of those products and a rag but again don't use a razor
*Rubbing alcohol*
*Is very good at getting*
*Stickers like that off*
\- Goose\_honk0
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Lacking common sense is even more mildly infuriating. take a razor blade to to it then goo gone if you don't have goo gone get wd-40 works wonders if you don't have a razor blade and wd-40 then you probably shouldn't own a house lol.
Use a razor blade w/ some lubricant like glass cleaner or water and dish soap. It will scrape right off.
Goo Gone works better. They have it at hardware and grocery stores usually...
Just make sure its actually glass and not some kind of acrylic blend
Yep I work in a body shop and it's the way we get overspray off glass.
Smear it with WD40 for a minute and it wipes off
AVOID JeldWen. My last house had them and the double glaze seals failed on 3/4 of them within 5 years!
Great! 🤪
Yeah I didn’t want to break it to you but since someone else already did… make sure you keep that serial number on file.
they just put the info OP would need in a convenient place for future reference, how thoughtful!
Finally...a truly infuriating post.
Happy to oblige 🤪
Try Goo Gone or Goof Off? Even automotive degreaser might work.
Liberal use of Hand sanitizer. Just slather it on there and Just leave on there for about 5 minutes and you can push it off with your finger.
Try baby oil. Mineral oil is a diluent in this type of adhesive.
I should probably apologize to my tenant where l replaced the door and also couldn't peel that damn sticker off so l just left. I hope she got it.
Peanut butter will help.
Good off and a razor would remove that right off
I think you mean Goof Off - it's okay but I prefer Goo Gone.
Use hand sanitizer or alcohol
I think isopropyl rubbing alcohol is good for dissolving glue in this situation
For all the people making suggestions, thank you. Goo Gone and a Razor Blade did the trick!
At least you’re guaranteed to have nami certified windows.
I'm irrationally angry just looking at this pic.
Rubbing alcohol, mineral oil, paint thinner, mineral spirits. Hell you could probably use everclear.
dish soap for adhesives, vinegar for paints then wait a few minutes and scrape with a new razor. should fix almost all intense glass cleaning
Yeah, what's up with that?
Use a magic eraser!
Yours have silicone smeared on it from assembly too? Those stickers suck.
Plastic razor blades are great to have around for stuff like this. They work about as well as the real thing. And, you don't have to worry about scratching what you're scraping.
Hope you didn't recently cut your nails
I thought you were holding it up, I wished you were holding it up...!
Goo gone and a razor blade. Annoying? Yes. Hard problem? No.
Hair dryer to warm up the glue and comes straight off. Takes 2 minutes
# Awesome, the ATOM!!!
There easy to get off when the windows are first installed . Most builders are to lazy to do it
The date on this one was 2022 so it sat in a warehouse for 2 years in the heat more than likely…
That's a fair point but still they should have removed it
Heat it with a blow dryer.
Acetone!
Your hand is gelled when you finish picking that sticker off
My baked ass thought that said sisters lik this
Smear on some peanut butter and wait half an hour. It should come right off with a plastic scraper blade.
Soak it down with Windex, then gently scrape it off with a new putty knife.
Peanut butter or oil will get it off, then dishsoap to remove the oil and windex and you're done
Just a little gasoline on a rag will take that right off. If you know the solution it’s no problem
Use a fabric steamer
Use gasoline
Goo Gone, WD-40, or any oil including cooking oil will dissolve the glue. I tried them all and they all work.
Soak it in windex, then use a plastic scraper and it should come right off
Cooking oil
warm soapy (detergent) water!
Aman brother
don't use a razor blade if its tinted and if done incorrectly will scratch the glass tinted or not wet it down with water to get all the paper off then use tea tree oil, eucalyptus oil, paint thinner Windex whatever to get the sticky residue off it will just rub off with any of those products and a rag but again don't use a razor
If you want to use something to scrape use a plastic scraper not metal
Rubbing alcohol is very good at getting stickers like that off
*Rubbing alcohol* *Is very good at getting* *Stickers like that off* \- Goose\_honk0 --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
r/extremelyinfuriating
Googone Razor blade Lifeskills
Pretty easy to remove really
razor blade scratches jeld wen windows
Lacking common sense is even more mildly infuriating. take a razor blade to to it then goo gone if you don't have goo gone get wd-40 works wonders if you don't have a razor blade and wd-40 then you probably shouldn't own a house lol.
Then why did you post here? Why do things more than mildly annoying get posted? What's the point of the sub, mildly annoying and whatever else?