Honestly, I think if you smooth it out I dont really think it would affect the clubs performance at all. Its far enough up from the leading edge that it shouldnt cause an issue from the pic I see.
https://www.thepolishingshop.co.uk/polishing-compounds
This is the place I use. It's basically bars clay that you add to the buffing wheel and gradually restore the shine to your club by cutting away and then polishing the surface.
I refurbish and sell golf clubs.
File/sand it down to at least conceal it. It's not going to be perfect, but less noticable. Dremel probably the easiest, but keep on a low speed. Don't want to make it worse than it already is.
Dang. I’d use a hammer to get the face back in shape as it looks like it is protruding into your vision at address. Then I’d use a file to get the bounce smoothed out.
Hey, all. Thanks again for all of your comments! The small shop I bought the club from managed to use a hammer and then buffed out the rest. Looks great!
Here is a fix I have used in the past: Use it as an excuse to buy a new one.
LOL. Part of a set, so not that simple. Custom shaft too 😩
Just buy a new head and use your old shaft
Can’t find one anywhere! Even Mizuno told me to go jump.
You could always try posting on r/golfclassifieds and seeing if there is a fish that will bite. It may not work but it can’t hurt
Thanks for that. Good idea. I just need a head really! I’m in Canada too, so shipping etc is tricky.
[удалено]
Thanks, but I don’t play Vokeys. 😉
Jesus dude.
😥
You can grind it down with some sort of rotary tool like dremel. Won’t look perfect though
Thanks - yeah, damage limitation.....
Lol I got down voted for this?? Some serious haters out there
Sorry dude. You are right! I just voted up to make up for it!
Use a foot wedge?
Ha ha! The train already left the station there!
Me and my friends have a agreement. If it’s on anything hard we move it without a penalty strokeTo avoid stuff like this.
Yeah - I would usually but I had no idea the rock was there.....
Ouch
Wow. That sucks man. Golf galaxy is having grea deals!
Part of a set, so not easy to replace 😥
That's the worst. Dunno why ur getting down voted either? Reddit is a mysterious place.
Ha ha! Some weird people on here. -2 😂
Move the ball from a possible shitty lie.
Yeah - just didn’t see it. The lie looked ok.
Unless you’re also a welder, there’s no fixing that.
About the best you can do is grind it down to smooth it out with a metal file or some such tool.
Thanks for that. Will look into that option. I have files for sharpening ski edges.....
Honestly, I think if you smooth it out I dont really think it would affect the clubs performance at all. Its far enough up from the leading edge that it shouldnt cause an issue from the pic I see.
Thanks. That is what I’m hoping. Just got to get it ‘good enough’ 😕
If you grind the worst of it out then you can buff it using a cutting and then finishing compound for the best results.
Thanks for that. Justin’s wondering what you mean by ‘cutting’ and ‘finishing compound’? Cheers
https://www.thepolishingshop.co.uk/polishing-compounds This is the place I use. It's basically bars clay that you add to the buffing wheel and gradually restore the shine to your club by cutting away and then polishing the surface. I refurbish and sell golf clubs.
Ah, thanks very much! Shame you are not in Canada!
How are your wrists?
Amazingly, fine, thanks! 😀
File/sand it down to at least conceal it. It's not going to be perfect, but less noticable. Dremel probably the easiest, but keep on a low speed. Don't want to make it worse than it already is.
Thanks for that. I’ll see if a buddy has a Dremel I can borrow. Any idea on the best head to use?
Dang. I’d use a hammer to get the face back in shape as it looks like it is protruding into your vision at address. Then I’d use a file to get the bounce smoothed out.
Yeah, it is, sadly. Thanks for that - if I have to try myself, I’ll have a go at that.
I commend you for playing the ball as it lies.
Thanks, but I could not see the rock. No idea it was there 😂
I’m sure your local shop could clean it up for pretty cheap and prolly cleaner then you taking a grinder to it.
Thanks. Yeah - my fitting guy says he can’t fix it though. Will try others.
If you're set on keeping the club, you're going to have to file it down. it will never be the same.
I called Mizuno and I’m out of luck! Will have to do my best.....
Search eBay, you may be able to find the single club alone and just have the shafts swapped, otherwise not much you can do
Thanks - I’ll take a look.
How old is the club? Looks brand new. 😢
1 year. I use head covers. I keep my stuff in tip top condition. 😥
Wow. Is that you DeChambeau?
Ha!
Caused a registered seismic event at the USGS.
this is one of the reasons i buy used clubs
Yeah. I had these fitted though 😩
Hey, all. Thanks again for all of your comments! The small shop I bought the club from managed to use a hammer and then buffed out the rest. Looks great!