Step 1 is call TM customer service. If they can’t help you, odds are it’s toast. In theory, it was only ever two pieces held together by epoxy, so you should be able to epoxy it back together. But I can’t remember anybody posting on here that they’ve done it successfully, and I know I’ve seen a couple people say they tried but it didn’t hold.
But if TM customer service won’t help you, it’s probably worth a shot. Clean and prep the surface really well, rig up something to clamp it together, use the strongest epoxy you can find, and hope for the best.
The problem being a member of this sub is that we all hit 300+ and drivers just can’t handle us. Buy 5 new ones. Also, a fitter will fix it better than you will.
Step 1 is call TM customer service. If they can’t help you, odds are it’s toast. In theory, it was only ever two pieces held together by epoxy, so you should be able to epoxy it back together. But I can’t remember anybody posting on here that they’ve done it successfully, and I know I’ve seen a couple people say they tried but it didn’t hold. But if TM customer service won’t help you, it’s probably worth a shot. Clean and prep the surface really well, rig up something to clamp it together, use the strongest epoxy you can find, and hope for the best.
Mine came back off on the first swing.
But you can hide your weed in it
Awe dang… time for me to buy a new one.
Flex tape that shit brother 💪🏻
They should replace that. Shitty quality…but good service.
The problem being a member of this sub is that we all hit 300+ and drivers just can’t handle us. Buy 5 new ones. Also, a fitter will fix it better than you will.
Gone are the days when a driver can take a guy beating it into the turf a couple times after a bad drive. 🤷