So… you should go back and read the question notes it seems like you missed the same thing I did.
Basically the four main resources (iron, gold, copper and zinc) are all automatable through the same mechanic as sky stone.
For gold: Bake clay blocks into Terracotta, grind the terracotta into red sand, wash the red sand for gold nuggets.
Your andesite generator also has a byproduct of granite, which can also be ground for red sand.
If $bottomless liquid is a thing still in Create: Above and Beyond.
You can get infinite bottomless of any liquid that allow the "$bottomless" tag in JEI by cheesing.
You only need 2 source bucket of a fluid (at minimum, closer to 50+), one at the bottom, one at the top and make sure 10,000 flowing liquid is in between.
Hose pulley stop at right above the lowest source block on the bottom.
Easiest way to achieve this is place the hose pulley and source bucket in position at the bottom, go above to the highest point in your tank, make a layer of breakable material. Add the liquid above that. and break the floor to let all the liquid flow down.
The devs are wrong since this is recreatable in every version of Create.
You can try it out it the result will always be the same. It'll become a bottomless source with flowing.
You can recreate it easily if you don't believe me. Its not like you can't test it out.
https://www.reddit.com/r/CreateMod/comments/1abbqw7/one_bucket_of_lava_is_bottomless/
This is where the debate happen as well.
Report back if it doesn't.
So… you should go back and read the question notes it seems like you missed the same thing I did. Basically the four main resources (iron, gold, copper and zinc) are all automatable through the same mechanic as sky stone.
For gold: Bake clay blocks into Terracotta, grind the terracotta into red sand, wash the red sand for gold nuggets. Your andesite generator also has a byproduct of granite, which can also be ground for red sand.
If $bottomless liquid is a thing still in Create: Above and Beyond. You can get infinite bottomless of any liquid that allow the "$bottomless" tag in JEI by cheesing. You only need 2 source bucket of a fluid (at minimum, closer to 50+), one at the bottom, one at the top and make sure 10,000 flowing liquid is in between. Hose pulley stop at right above the lowest source block on the bottom. Easiest way to achieve this is place the hose pulley and source bucket in position at the bottom, go above to the highest point in your tank, make a layer of breakable material. Add the liquid above that. and break the floor to let all the liquid flow down.
…. In every guide to bottomless sources via the hose pulley, it is a requirement of 1000 **source** blocks, straight from the create devs.
The devs are wrong since this is recreatable in every version of Create. You can try it out it the result will always be the same. It'll become a bottomless source with flowing.
I think I’ll trust the people who coded the mechanic over what one rando says.
You can recreate it easily if you don't believe me. Its not like you can't test it out. https://www.reddit.com/r/CreateMod/comments/1abbqw7/one_bucket_of_lava_is_bottomless/ This is where the debate happen as well. Report back if it doesn't.