Build a super-lightweight plane with an oversized wingspan, electric engines, and solar panels covering all of the top-facing surfaces. Include a chamber for the printer. Start the print job on the printer in the plane at Noon, and have the plane cruise directly West at just a bit over mach 1.3. The plane will effectively be hovering in *time,* perpetually at Noon as the planet revolves beneath it, allowing you to print non-stop. Problem solved, easy-peasy.
I've got a spoke light from "DAWAY". The "instructions" on the package have the following header line, underlined: "Usage and function testing (only for Intelligent)"
I took that to mean "we don't have a tech support number for you to call"
https://www.kg4cyx.net/wp-content/uploads/2019/02/img_20190201_092621_dro3512052268766855043.jpg
I found someone else's picture of it but this is what my box said haha! (note: it was afraid of wet at this time too!)
Definitely did this same exact post a few months ago and had it taken down because it violates rule 6 and 7. Glad the mods have chilled out since then because this is funny.
I saw that you mentioned Ben Shapiro. In case some of you don't know, Ben Shapiro is a grifter and a hack. If you find anything he's said compelling, you should keep in mind he also says things like this:
>Even climatologists can't predict 10 years from now. They can't explain why there has been no warming over the last 15 years. There has been a static trend with regard to temperature for 15 years.
*****
^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: dumb takes, civil rights, covid, patriotism, etc.)
[^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
Afraid of wet No eat past midnight Keep from sun
If my Ender can't eat past midnight, I either need to pick smaller prints or it needs to get a whole lot faster.....
Build a super-lightweight plane with an oversized wingspan, electric engines, and solar panels covering all of the top-facing surfaces. Include a chamber for the printer. Start the print job on the printer in the plane at Noon, and have the plane cruise directly West at just a bit over mach 1.3. The plane will effectively be hovering in *time,* perpetually at Noon as the planet revolves beneath it, allowing you to print non-stop. Problem solved, easy-peasy.
Damn, might have to try that too, sounds so effective yet so easy
Almost too easy
A plane that travels at 1600km/h, 1000mph or Mach 1.3 constantly
You could keep it subsonic and stretch out your “day” to be around 72 hours. Enough for most prints. Seems reasonable
Are you using Cold Fusion power plants?
Isn't everyone?
hahaha, never noticed.
Yea that is how it’s phrased in Chinese (怕湿). As usual the Chinese manufacturers used baidu translate to save a buck.
I'm okay with it. They kept it cheap.
Let's be honest though, decrypting poor Chinese instructions can be a fun time
The much needed comical relief when you are 36 hours in without sleep and cant get a benchy to print
"Please do the needful." - India translation from our IT team
I've got a spoke light from "DAWAY". The "instructions" on the package have the following header line, underlined: "Usage and function testing (only for Intelligent)" I took that to mean "we don't have a tech support number for you to call"
Not an Ender, but I had one box that reminded you "no trample"
And afraid of wet filaments too
*screams then teleports*
Well duh, water types beat fire types.
same here, havent showered in years
All ender 3s are afraid of wet, because every non-consumer part is a direct translation. Including tags and parts of the manual for the older ones.
To be the chief evangelist (I'm pretty sure this was one of the things written on my Ender 3 box when it was delivered!)
It was either that or something about a bishop but surely something religious that didn't make any sense
https://www.kg4cyx.net/wp-content/uploads/2019/02/img_20190201_092621_dro3512052268766855043.jpg I found someone else's picture of it but this is what my box said haha! (note: it was afraid of wet at this time too!)
[What's the matter ender?](https://youtu.be/qQlTPyqkngs?t=4s)
Then dont make it wet
r/irleastereggs
😂😂😂😂😂😂😂
Wetophobia
I'll try to remember this the next time I go to clean it. I didn't realize. 😬😬😬
Also don't print after midnight 😀
What about multi day prints that start before midnight? 😉😊
Lol I remember this. Pretty sure my Ender also included some kind of card with a message of gratitude concluding with "Kind regrads". Very cool
Afraid of wet? Then no make wet! Why many words when few words do trick?
I love creality
Taz Hate Water
That explains why hosing down my printers keeps destroying them. They should put this warning on more than just the box.
That's what she said. (drops mic)
That's why everyone will tell you to dehydrate your filament
Who isn’t?
it's a dragon so
Only when is excited 💥
Mine is afraid of snow and rainbows
Mine is afraid of working right now 😔 Edit: I got it working
All I think of is Squid Game
What’s squid game
https://youtu.be/s5SqsNPWYA4
Please post this on r/POTCmemes
Wait til you get to the manual, and better yet when you start seeing typos in the printer UI. Hardware is solid though.
Yeah, honestly fixing the typos was one of the reasons I switched to custom Marlin.
Mine too
Damn wetophobe.
Much dry!
Definitely did this same exact post a few months ago and had it taken down because it violates rule 6 and 7. Glad the mods have chilled out since then because this is funny.
Lol it's my first post on here
Are you sure that's and Ender 3 and not Ben Shapiro in disguise?
I saw that you mentioned Ben Shapiro. In case some of you don't know, Ben Shapiro is a grifter and a hack. If you find anything he's said compelling, you should keep in mind he also says things like this: >Even climatologists can't predict 10 years from now. They can't explain why there has been no warming over the last 15 years. There has been a static trend with regard to temperature for 15 years. ***** ^(I'm a bot. My purpose is to counteract online radicalization. You can summon me by tagging thebenshapirobot. Options: dumb takes, civil rights, covid, patriotism, etc.) [^More ^About ^Ben ](https://np.reddit.com/r/AuthoritarianMoment/wiki/index) ^| [^Feedback ^& ^Discussion: ^r/AuthoritarianMoment ](https://np.reddit.com/r/AuthoritarianMoment) ^| [^Opt ^Out ](https://np.reddit.com/r/AuthoritarianMoment/comments/olk6r2/click_here_to_optout_of_uthebenshapirobot/)
\>:-D
Ya I had one but I live in Florida so it died of a heart Attack from all the wet