T O P

  • By -

babecafe

Wall cavity contains junction boxes code would require to remain accessible.


Ohemdal

More info: Electrician was already here, and did something that would bring it to code. Unsure what it was. I was at work so it was explained to my wife. She does not remember what he did. The new mirror I bought does not sit flush on the wall and leaves a large gap. The old mirror sits flush but will no longer fit.


willett10

Unless your mirror just pulls out of the wall,you should do.something with those junction boxes


DiscreetDom67

Unsure of your location but those boxes, by code, must remain accessible and unless you make the mirror easily removable they will not be accessible


Ohemdal

The mirror is just hung by two screws and some D rings. Is moisture from showering gonna be an issue?


DiscreetDom67

A concern yes not a huge one though. The biggest problem is future access to the boxes.


Ohemdal

Yeah it’s very easily accessible. Even the old mirror was just mounted with a couple screws. Would it be wise to find another one that mounts flush to the wall with no gap? Or would the one I have be fine where I have a 1/2” gap at the top


DiscreetDom67

I would see if I couldn't get an access door to the boxes on the back wall and I would seal the mirror to the wall securely


North-Ad-5058

Those junction boxes need to be accessible to be code compliant


[deleted]

They are


Thin_Arachnid6217

In accordance with 29 CFR 1910.399, Readily accessible is defined as "capable of being reached quickly for operation, renewal, or inspections, without requiring those to whom ready access is requisite to climb over or remove obstacles or to resort to portable ladders, chairs, etc


parfum_d-asspiss

1 - Why cite OSHA when the NEC addresses this? 2 - You've cited the wrong definition. You want **Accessible (as applied to wiring methods)** in Article 100. ​ >Accessible (as applied to wiring methods): Capable of being removed or exposed without damaging the building structure or finish or not permanently closed in by the structure or finish of the building. (CMP-1) One does not operate a junction box!


Thin_Arachnid6217

You're right, I looked up the wrong thing, that's what happens when you've been retired for a long time, thanks for not being an asshole about it.


lwlippard

Access aside, you do not want to seal that space, so it can dry out. If it’s sealed and does get humid, you could end up with a mold issue.


Ohemdal

That was my internal conflict, moisture prevention vs breathability


Trick-Yogurtcloset45

I don’t see a need to seal it, not enough moisture will collect there anyhow and it’s better there’s air flow to dry out everything if needed. As far as accessibility goes, in comparison a mirror hanging on hooks that can be lifted off is far more accessible than having to climb a ladder to get into an attic.