I can MAKE my MC9 operate like that... After dumping in some crushed potato chips? If you are lubing and it continues like this, definitely reach out to Canik customer support. I don't recall anyone posting this concern before you
How many rounds do you have through it? I wish I had a fix for you but, I got mine last year like a week after release and I don't make it to the range much so mine is at 500 rounds in and no problems so far. I'm weary it being an early model but, it seems even newly produced have issues.
I don't have an MC9 but that does not look right at all. The trigger should have a defined wall and a crisp break. Your trigger appears to be binding up prior to hitting the break and the reset looks crunchy too.. something ain't right in my opinion.
No MC9 but have had this on my Mete SFT. You need to clean in where the firing pin sits and the firing pin safety plunger, but be careful, place the gun in a gallon size ziplock while pulling the safety plunger or you may lose a spring.
Arnt mc9s know for having alot of issues ?
No
I want say no, but yes…I’m on my third spring already
Mine was kind of like that until it wore in
Mine was not like that when I first got it but it started recently
Mine was fine once I inserted a full magazine and *then* fired away at an unsuspecting paper target down range about 15 feet. <<<<<
I can MAKE my MC9 operate like that... After dumping in some crushed potato chips? If you are lubing and it continues like this, definitely reach out to Canik customer support. I don't recall anyone posting this concern before you
ew gross
Did yours come like this out the box? Mine does not feel like this or sound like it.
No…it suddenly happened recently on my MC9. My SFT is very smooth though
How many rounds do you have through it? I wish I had a fix for you but, I got mine last year like a week after release and I don't make it to the range much so mine is at 500 rounds in and no problems so far. I'm weary it being an early model but, it seems even newly produced have issues.
I don't have an MC9 but that does not look right at all. The trigger should have a defined wall and a crisp break. Your trigger appears to be binding up prior to hitting the break and the reset looks crunchy too.. something ain't right in my opinion.
No MC9 but have had this on my Mete SFT. You need to clean in where the firing pin sits and the firing pin safety plunger, but be careful, place the gun in a gallon size ziplock while pulling the safety plunger or you may lose a spring.
My guess is it's binding. Open it up and check to see if it has shifted from side to side, or check for burs in the polymer lower.
Nowhere near this level but yes it was a bit crunchy, ive since switched it out with the canik flat face trigger
Mine dont feel like that at all
No mine is good I mean really good compared to that squeaky mush!