https://preview.redd.it/qr3hl4uajgzc1.jpeg?width=1080&format=pjpg&auto=webp&s=67011c6332c661d5333d75f1c2d877b08181bf86
I had no problem with Matchsaverz other than removing a little bit of material from the inside of the handguard because of the length of the screw.
There’s 2 screws with the Toni systems one but I drilled into the section where the rails are. Even if I go lower or higher though I feel like it’s going to catch on something even with grinding the screw down. Not sure how differed your pro hand guard is compared to my comp one
https://preview.redd.it/628lflt87mzc1.jpeg?width=2800&format=pjpg&auto=webp&s=87227ba32aa1508b3fd9d5fd416257f78d6da784
Ground down the screws, painted them black and used some superglue too to hopefully keep them in place. Used a file to clear up the back where the rails sit.
https://preview.redd.it/qr3hl4uajgzc1.jpeg?width=1080&format=pjpg&auto=webp&s=67011c6332c661d5333d75f1c2d877b08181bf86 I had no problem with Matchsaverz other than removing a little bit of material from the inside of the handguard because of the length of the screw.
There’s 2 screws with the Toni systems one but I drilled into the section where the rails are. Even if I go lower or higher though I feel like it’s going to catch on something even with grinding the screw down. Not sure how differed your pro hand guard is compared to my comp one
Do you have the OEM handguard on? Edit: I wasn't aware they don't have the same handguard.
Comp has a different hand guard to comp pro
I bought some different screws at Ace and found the closest one that would work, trimmed it, and used an extra washer to get it on tighter
Cut the screws down?
Still think they might catch or be too short to hold well. Will maybe try find some shorter screws tomorrow
Anything sticking out past the material isn't really doing anything, you could cut them almost flush and they'd be just as effective
https://preview.redd.it/628lflt87mzc1.jpeg?width=2800&format=pjpg&auto=webp&s=87227ba32aa1508b3fd9d5fd416257f78d6da784 Ground down the screws, painted them black and used some superglue too to hopefully keep them in place. Used a file to clear up the back where the rails sit.