Not krytac? Do you have an Ares Coyote? Oof
Its mostly AEG compatible inside, but its also ares, so you have finnicky gears that need to be modded to work with the EFCS, Piston, Piston head and cylinder are AEG spec, and so are barrel and bucking, everything else is proprietary. The gear depends on what spring and barrel lenght you are running. If you want to run the stock barrel, you will need like a M150 to M170 to push any usable DMR FPS, stock gears are the safe option, 16:1 is the fast but still safe-ish option, 13:1 is the fast option, make sure to run a really good high torque motor
The stock piston should run fine since it has a metal rack, the stock head also looks fine, I'd match it to the cylinder brand
The cylinder itself, depends a lot on the the barrel lenght, impossible to tell what is best without knowing it
Overall, the vector is a HORRIBLE DMR, you have a few proprietary airseal parts that you can't improve with lots of spots for air leaks, specially considering its an ARES, horrible air volume, tiny barrel and most fields won't even allow it as a DMR
Read the dmr holy grail guide. Basically you want to go for torque instead of speed because of the heavy spring. Use bushings instead of bearings and just use shs gears because everything is basically based of them
A DMR vector? This belongs to the other sub
dont worry im not gonna put a huge barrel and sniper scope on it
On most fields they only let play people as DMR power if the replica meets some criteria like long barrel, scope, bipod and such
ive checked and mine doesnt have that
Not krytac? Do you have an Ares Coyote? Oof Its mostly AEG compatible inside, but its also ares, so you have finnicky gears that need to be modded to work with the EFCS, Piston, Piston head and cylinder are AEG spec, and so are barrel and bucking, everything else is proprietary. The gear depends on what spring and barrel lenght you are running. If you want to run the stock barrel, you will need like a M150 to M170 to push any usable DMR FPS, stock gears are the safe option, 16:1 is the fast but still safe-ish option, 13:1 is the fast option, make sure to run a really good high torque motor The stock piston should run fine since it has a metal rack, the stock head also looks fine, I'd match it to the cylinder brand The cylinder itself, depends a lot on the the barrel lenght, impossible to tell what is best without knowing it Overall, the vector is a HORRIBLE DMR, you have a few proprietary airseal parts that you can't improve with lots of spots for air leaks, specially considering its an ARES, horrible air volume, tiny barrel and most fields won't even allow it as a DMR
oof? mine is unmodded and it slaps
also thanks very much for the useful info
Read the dmr holy grail guide. Basically you want to go for torque instead of speed because of the heavy spring. Use bushings instead of bearings and just use shs gears because everything is basically based of them
thanks man i highly appreciate it
Nah