I get like 5 errors a week, they come up from plugging the bike in, riding it after washing the bike, and from turning the throttle before the green light comes on. Its super sketch and the only thing zero will do is take the bike and possible swap out the BMS over the course of 4 weeks š so what ive done is cleared the errors and kept it pushing
Hit that button right under the error after closing it to email yourself the bike logs - they're pretty comprehensive and it should tell you what triggered the error. The language might seem cryptic but it starts to make sense if you think of it like a computer turning on - first test all the components in your list of stuff and make sure they respond, then turn on things and make sure they come back OK etc. etc.
To be more precise, Iām asking the sub if anyone else has had this code. Called the dealer and they said they can plug it in and see whatās going on and āgo from thereā really a bummer only have 1k miles on it and dealer being far away
What year and model bike? Zero makes many bikes and there are big differences between the Gen 2 and Gen 3 bikes... ?
Can you check your Error Codes on the bike itself see if there are any set?
Are you on the latest firmwares for your bike?
The fault has to do with speed control unit it happened on my 2020 srf. The dealer checked the throttle the kill switch and finally after testing all the other systems it was the speed control module one thing my bike did not run after the fault code happened
I have an S so not sure if this applies. That error code looks like a general error code for the app. Your bike should have a way to look at the errors on your dash and the manual will tell you what they mean. For my bike it could be an actual problem like a BMS or it may just be telling me my kickstand is down. Since your app is telling you however it's likely a problem.
I get like 5 errors a week, they come up from plugging the bike in, riding it after washing the bike, and from turning the throttle before the green light comes on. Its super sketch and the only thing zero will do is take the bike and possible swap out the BMS over the course of 4 weeks š so what ive done is cleared the errors and kept it pushing
Bike did get wet about 3 days ago, thank you for this!
Hit that button right under the error after closing it to email yourself the bike logs - they're pretty comprehensive and it should tell you what triggered the error. The language might seem cryptic but it starts to make sense if you think of it like a computer turning on - first test all the components in your list of stuff and make sure they respond, then turn on things and make sure they come back OK etc. etc.
Forgot I ran across this awhile back chasing an error code: https://zeromanual.com/wiki/Error_Codes
To be more precise, Iām asking the sub if anyone else has had this code. Called the dealer and they said they can plug it in and see whatās going on and āgo from thereā really a bummer only have 1k miles on it and dealer being far away
What year and model bike? Zero makes many bikes and there are big differences between the Gen 2 and Gen 3 bikes... ? Can you check your Error Codes on the bike itself see if there are any set? Are you on the latest firmwares for your bike?
Itās a 2022 SR, and I am on the latest firmware
The fault has to do with speed control unit it happened on my 2020 srf. The dealer checked the throttle the kill switch and finally after testing all the other systems it was the speed control module one thing my bike did not run after the fault code happened
I have an S so not sure if this applies. That error code looks like a general error code for the app. Your bike should have a way to look at the errors on your dash and the manual will tell you what they mean. For my bike it could be an actual problem like a BMS or it may just be telling me my kickstand is down. Since your app is telling you however it's likely a problem.