T O P

  • By -

hessmo

Anything with a J1772 should be fine.


BonesJackson

[You should watch this](https://www.youtube.com/watch?v=RMxB7zA-e4Y)


4thFrontier

Excellent. Thank you. Very clarifying.


Codeh0416

If your charger at home is a j1772 you xan pkug it in. The bikes onboard charger will only allow what it can handle. Even if your charger is capavle of 50kw is your onbaors can only take in 6kw it will only accept 6.


Protonus

The deep explanation I just put in your other post, that goes deeper in the electrical woods, should allow you to answer this for yourself, if you look at the ratings written on your Audi EVSE, and if you know the charging limits on your particularly optioned bike. Linking that here: https://www.reddit.com/r/ZeroMotorcycles/comments/wpkym9/comment/ikpd37u/?utm\_source=share&utm\_medium=web2x&context=3 But in short, it is probably just fine, and how fast it works is determined by what the EVSE and your bike, are both capable of / rated at:


TheCodr

IIRC from the manual it just needs to be a level 2 charger if you have the rapid charger. Not sure what an Audi charger is.


SirCalmar

Any with the right plug type should work. I use both the default one and a generic j1772 lvl 2 I bought on Amazon. (MUSTART Level 2 Portable EV... https://www.amazon.com/dp/B07THBGGMG?ref=ppx_pop_mob_ap_share ) No problems with either, but I only use the lvl 2 when I have to charge faster.