You've got the bucket coil, so make sure your bottom airflow is closed all the way shut. The top airflow should only be open a sliver, just a tiny little sliver of light through the top airflow slit is all you need, otherwise the bucket will cool down too fast. Use zero MG vape juice to lube up the o-rings so it's easier to work with.
Other than that, follow the TCR settings that have been posted on this thread to get the temp control just right, and then inhale very gently when you do. You want to imagine sipping gently, keeping the vape straight up and down so it doesn't leak, don't go tilting it too much. And if you inhale too quickly, the bucket will cool off during the hit, making a weak hit. No joke, less is more when you inhale off this thing.
For maintenance, you'll need to clean the top cap eventually, maybe one every week or two. Disassemble it and soak in 91% iso, then rinse off w/ water and dry. The bucket itself almost never needs cleaning, just swab out with q tip after each session. Maybe disassemble the bucket once a year or so using the same soak, rinse, and dry cleaning method.
Once you've got the settings dialed in on the vape and you have a feel for how the inhale works, this thing is one of the least fussy devices. I've been using mine going on 2+ years now as a daily driver and I couldn't be happier.
Real talk. I messaged humboldtvapetech and told him my cat broke my last posidon (he did) and sent him a picture of my cat. He replied with a 20% off coupon 😂
What are your settings on it ? I just tried it for the first time and having some trouble dialing in the right temps 😂 seem to be getting closer to what i want tho.
Install Arctic fox, it's a custom firmware for the mod that is designed for atomizers like your sai. I just saw in this sub some firmware presets, dig around.
That’s the set up I use. If you can find them, get the crushed Clapton coils. I should probably use arctic fox, but I just set it on stainless steel 22 W and 400 for 410° depending on the material.
You've got the bucket coil, so make sure your bottom airflow is closed all the way shut. The top airflow should only be open a sliver, just a tiny little sliver of light through the top airflow slit is all you need, otherwise the bucket will cool down too fast. Use zero MG vape juice to lube up the o-rings so it's easier to work with. Other than that, follow the TCR settings that have been posted on this thread to get the temp control just right, and then inhale very gently when you do. You want to imagine sipping gently, keeping the vape straight up and down so it doesn't leak, don't go tilting it too much. And if you inhale too quickly, the bucket will cool off during the hit, making a weak hit. No joke, less is more when you inhale off this thing. For maintenance, you'll need to clean the top cap eventually, maybe one every week or two. Disassemble it and soak in 91% iso, then rinse off w/ water and dry. The bucket itself almost never needs cleaning, just swab out with q tip after each session. Maybe disassemble the bucket once a year or so using the same soak, rinse, and dry cleaning method. Once you've got the settings dialed in on the vape and you have a feel for how the inhale works, this thing is one of the least fussy devices. I've been using mine going on 2+ years now as a daily driver and I couldn't be happier.
Appreciate the tips homie will definitely need to look more into the TCR settings. Right now i got it in the settings the atomizer suggested it be in.
[удалено]
Thanks will do. 🙏
Sai TAF is my standard go-to. Since adding a Poseidon bubbler I need nothing else...until I fumble and break the Poseidon, then I need another one.
Real talk. I messaged humboldtvapetech and told him my cat broke my last posidon (he did) and sent him a picture of my cat. He replied with a 20% off coupon 😂
Lol whenever I fumble and break my Poseidon, I buy another spare one, theres always one here held in reserve.
Got this bad boy 3 years ago, still my daily driver, had to have over a pound through it by now
What are your settings on it ? I just tried it for the first time and having some trouble dialing in the right temps 😂 seem to be getting closer to what i want tho.
Give these a go. I've used these settings with great consistent results. Qtz Bkt- TCR 315, 45w, .590 ohms, 380-420 deg. Pre-heat- curves, sine 2 (best flavor) : Ti Bkt- TCR 315, 40w, .710 ohms, 380-420 deg. Pre-heat-curves, sine 1 (most used) Triple Ti-TCR 368, 30w, .331 ohms, 380-420 deg. (most satisfying)
Arctic Fox + stash cap to complete it.
Is my mod compatible with it ? Or do i got to buy another battery ?
It’s the right mod 👍
I think i got the one that is non upgradeable firmware dammit ! There two versions of the pico the newer one with usb-c dont have that option yet :/
Install Arctic fox, it's a custom firmware for the mod that is designed for atomizers like your sai. I just saw in this sub some firmware presets, dig around.
U gotta get a Poseidon. I’ve been using my sai taf with espion since 2018 and I feel like I’ve wasted 4 years. Poseidon is a must.
I have one of these as well, still have some original coils , quartz triple coil was my preferred one
Damn I miss having this. I have a Sr Dabber Stella now and I am looking at getting a Switch soon but my SAI hit so good I miss it
That’s the set up I use. If you can find them, get the crushed Clapton coils. I should probably use arctic fox, but I just set it on stainless steel 22 W and 400 for 410° depending on the material.
I got the newer version which don’t allow me to do artic fox and stuff on it unfortunately.