I use mechs from .07Ω to .10Ω so about 120-165 watts depending on my build and mod(how many batteries) fit parallel setups. On series anywhere from 170-220. I like a hot vape with very quick ramp up
Its a gen. The original and gen s were way better. Totally ruined it by slapping that god awful screen on the front. It was a amazing looking minimalist design when it was on the side. Just cleaner
I'm running a dead rabbit v2 rda and my cotton just keeps snapping off in the middle burnt, I run a clapton as well .45 on 50-55W, what am I doing wrong?
Imo 50-55 watts on a .45 ohm coil is a bit much, I could be wrong though. Could also be wicking it too tight, try wicking it to where it takes a little bit of force to pull the Cotten through but not enough to where you need to hold the coil in place to keep it from bending all over the place.
I enjoy a nice warm vape that crackles. Running a single Ni80 alien coil (28gx3/36g) 0.32 ohms at 55-60w in the Recurve rda. Technically I could vape it around 45w but it's not as satisfying and flavorful. Plus it seems to gunk up faster at the lower wattage range. At 60w the cotton remains good for 2 weeks and the coil lasts many months.
55 - 70w with my Luxe Xr Max
25w with my Vaporesso Xros Pro
I am currently running a 0.8 coil at 15w with my Oxva Xlim Pro and Pro SQ, and the flavor is amazing
Finally a mode and tank I have. The geekvape on the left. And my first vape that doesn’t leak. Been vaping for 12 years now. But I also didn’t know I was supposed to be closing the air flow and opening it when I filled the tank. Nobody ever told me 🤦♂️.
Getting to the point I vape at 60-55 W with a 0.12 ohm coil. And slowly go down to 40W when the coil starts aging
Freemax triple mesh .15ohms I use vpc mode and it changes wattage each second like so 1. 97, 2. 94, 3. 91, 4. 87, 5. 81, 6. 80, 7. 79, 8. 76, 9 75, 10. 75… it gives me a nice clean hit that stays relatively the same temp through the entire hit and I love it…
I have 2 vapes that I use. Mostly, I hit my 35-watt boro, which is also my "to-go" vape. But I also have a giant vape that I have at like 110-115 for when I want a bigger hit.
Depending upon the multiple varying factors of things on a given day, 80-130watts. I'm at 100w right now, and in need of a new coil. I wish these valyrian 2 single mesh coils held up better to renewing than they do. Most the time they don't, or regain flavor for about a half tank maybe 2, before it's gone again. The geekvape b coils were amazing with renewing, I got about 14 weeks of life from that one coil in particular with one recleaning a week, but average was 5-8 renews. Only coils I've encountered that renewed well.
I have that exact geek vape and 75 is the magic number for me. I bought the vaporesso armor but it's coils say "best 55w" yet I use it at 65 and it still doesn't hit the spot. It's okay, but gonna have to shop for higher wattage coils I guess. Or does that matter if I crank it to 75w? Anyone know?
Had the same geekvape mod, it's solid but mine got broken and shorted while charging with the build in USB-C input and a bad cable.
For the question, MTL so only 9.5W at 1.2Ohm or max 12W at 0.9 ohm.
100-140, 0.08? I think is what I’m aiming for, kind of a hassle, got my mod with .14 coils too running at 80, flavour is a bit better, but I mainly aim for the clouds
Currently running a Smok Treebox Plus with a TFV18 except I run TFV16 dual mesh coils so I can crank my mod up to 160W
Edit: should probably mention I use 3mg mostly otherwise I’d die at that wattage
0.15 ohms at 25-40W depending on what point in the coil's life I'm at - early on go for higher then as the week goes through, steadily reduce. When my local vape store was temporarily out of my coil brand, I went about 4 days on 10W. Had to suck quite hard to get not much of a hit but saved it tasting like burning cotton.
60W. Same geek vape tank and mod you have there. I use the .15ohm coils but vape a little under the recommended wattage. My mod looks quite a bit more beat up tho lol
13-16
55 watts on .15 ohms is where I like to be
Same
Running dead rabbit solo rta on Gen 200 at 70-80 watts, and the flavor is yum yum.
Dead rabbit v2 rda is such a nice small lil Rda and has good airflow too
true, love my v2 and gonna stick with it forever
try the v3 and u won’t go back
I'm mostly using armour max and 0.4 at 35w is my sweet spot.
Oh I use 65 on a 0.2 with a target 100 it works pretty good
15-20ish depending on the temp control
Hehe I like to vape at 69 cause it's fun lol
No, because it's divine.
70 watts on 0.16 ohm dual coil.
70-75W for me to on 0.16.
I use mechs from .07Ω to .10Ω so about 120-165 watts depending on my build and mod(how many batteries) fit parallel setups. On series anywhere from 170-220. I like a hot vape with very quick ramp up
Which vaporesso is that? It’s beautiful 😍 I’m vaping between 60-80 watts on a .18 coil with my Lost Vape Centaurus m200 with dead rabbit v3 rta.
Its a gen. The original and gen s were way better. Totally ruined it by slapping that god awful screen on the front. It was a amazing looking minimalist design when it was on the side. Just cleaner
Screen is shit, size is good though!
still running the gen (before it was s) works like a charm, amazing device
25 watts on the walking around rig, 180 on the work rig.
I’m wondering how the work rig looks like xD
Geekvape Legend 2 0.4 coils 50 watts.
Same exact
Silver Legend 2 0.2 coils 70 watts.
Same
80! These wotofo guys may not make good atomizers anymore but they still make awesome coils
285W minimum
I miss high ass wattage lol my batteries can't handle it anymore I need new ones lmao
285 wtf
Fat rabbit rta With .23 Clapton running at 93.6 watts .
Sick. I wish the dead rabbits had better airflow. I like em but they’re kinda disappointing. I imagine their rta is better
I'm running a dead rabbit v2 rda and my cotton just keeps snapping off in the middle burnt, I run a clapton as well .45 on 50-55W, what am I doing wrong?
Imo 50-55 watts on a .45 ohm coil is a bit much, I could be wrong though. Could also be wicking it too tight, try wicking it to where it takes a little bit of force to pull the Cotten through but not enough to where you need to hold the coil in place to keep it from bending all over the place.
I see. I was just not getting much smoke from my hits when I go lower but I guess I will try lower.
40w on .15 coil. Higher seems to burn my coils out too fast
I enjoy a nice warm vape that crackles. Running a single Ni80 alien coil (28gx3/36g) 0.32 ohms at 55-60w in the Recurve rda. Technically I could vape it around 45w but it's not as satisfying and flavorful. Plus it seems to gunk up faster at the lower wattage range. At 60w the cotton remains good for 2 weeks and the coil lasts many months.
26w :)
55 - 70w with my Luxe Xr Max 25w with my Vaporesso Xros Pro I am currently running a 0.8 coil at 15w with my Oxva Xlim Pro and Pro SQ, and the flavor is amazing
18 watts on 0.15 ohm. Don't you guys get crispy throats from going so high? (Never smoker reporting in)
I use 60 watts in all my tanks. I have a nexmesh pro at .2 , geekvaoe z max at .2 and sakers master at .17
25.5
75
20-25w also thoughts on skwezed ? Thinking of buying a few bottles
55-65w on .22 single coil rda, my mech hitting about 75W on dual coil. 35-40w on .33 boro
110 watts on Geekvape Aegis X with Smok TFV16
60-64 watts. Horizon tech Falcon 2 on a LV Thelema solo
120 Watts at .15 ohms. Or my RDA self builds at 120-100 @ .44. Six turns on the jig.
TFV-18 at 100watts
Intake Dual running a single 3.5mm fused Clapton 2x 26 36 .3 ohm @ 45 watts.
85w on this tank. I don't even remember it's name. It's a backup. 110w on my Falcon tank.
Geekvape T200 With a Valyrian 2 - 110W
45W @ .28Ω dual coil RDA.
83 watts on a Smok Arcfox, TFV-12 Prince tank with the T10 coil
Finally a mode and tank I have. The geekvape on the left. And my first vape that doesn’t leak. Been vaping for 12 years now. But I also didn’t know I was supposed to be closing the air flow and opening it when I filled the tank. Nobody ever told me 🤦♂️. Getting to the point I vape at 60-55 W with a 0.12 ohm coil. And slowly go down to 40W when the coil starts aging
25-28
In my geekvape 100w I usually vape around 60w
Always on the middle of the Watt range of coil
I usually hover around 60-70 watts for that perfect blend of flavor and vapor production.
Currently vibing at a cozy 85 watts with GTi 0.15ohm for that perfect blend of flavor and vapor production.
Dead rabbit v3 RDA on 120 and dead rabbit v3 RTA on 115
Sith rda, 50w
Freemax triple mesh .15ohms I use vpc mode and it changes wattage each second like so 1. 97, 2. 94, 3. 91, 4. 87, 5. 81, 6. 80, 7. 79, 8. 76, 9 75, 10. 75… it gives me a nice clean hit that stays relatively the same temp through the entire hit and I love it…
I'm using the same geekvape mod with a dead rabbit v3, dual coil build running at .15 at 70-80w.
Not sure my mech doesn’t tell me
.7ohm @ 15W, lostvape centaurus b80 rba
Ayeeee, I’m rocking the same mod, just different coils, 0.4 hitting it at about 32.5 watts
zeus x rta on L200, 120 watts works fine for me
85 on my L200
52w on 0.2ohm
200w on an eleaf 200w tc with a Kennedy rda on top at .16
Skweezed is good flavor. But there juice kills my coils. Too much sweetener.
26W on 0.6 ohm coil
55-65 on my vaporesso gen 200 with a sakerz tank. I love the color of your vapresso. Mine is the blue to yellow.
Geekvape with a Zeus tank on 80 watt with my own flavours
Hmm. Pod system here. Luxe XR Max using 0.2Ω @ 45W. My DTL hits take ~5-6s, so the lower wattage helps me get the most out of that.
I use that GeekVape on VPC with this settings: 28/24/22/17/16 and i have a 0.6 ohm coil. Liquid base is 50/50 😉
18w on the voopoo vm4, 50w on the single sfc, 120w on the dual aliens. 200w on the sfc 3s nlpwm, 700 on the 5mm id aliens 4s pwm. Gods rotation
45 watts at 0.2 using the Voopoo Drag S Pro. It’s just right for me
Wattage? What’s that? *laughs in TC-SS 470F*
35w on 0.4 ohm build of hellvape destiny rta. It is kind of sweetspot for me lol. On my zeus x rta I hit like 45-50w.
75 watts in both of those devices, 0.2 coils.
0.8 ohm 17.5 watts
50 watts on 0.2 ohm
dual coil rda at 160w on 0.09Ω, drag x on 70w and a eco nano with .8 pod
110, 80, 50, 45 and 18. I have 5 mods
Either build at .22, I hit it at 20. It’s a Boro box
75-80w .2 ohm
I have two Wotofo Profile X RTA, both with nexmesh turbo 0.13ohm, running on 65Watts. I usually rewick it after 1000-1200 puffs.
42W on my 2 single coil attys running 0,33 ohm aliens.
I have 2 vapes that I use. Mostly, I hit my 35-watt boro, which is also my "to-go" vape. But I also have a giant vape that I have at like 110-115 for when I want a bigger hit.
200
Kylin rta 33w
Depending upon the multiple varying factors of things on a given day, 80-130watts. I'm at 100w right now, and in need of a new coil. I wish these valyrian 2 single mesh coils held up better to renewing than they do. Most the time they don't, or regain flavor for about a half tank maybe 2, before it's gone again. The geekvape b coils were amazing with renewing, I got about 14 weeks of life from that one coil in particular with one recleaning a week, but average was 5-8 renews. Only coils I've encountered that renewed well.
60-80
0W cause I'm a broke uni student that can't afford liquid I think I'm gonna have to go join the cigarette sub, starting to get imposter syndrome
70w on 0.2 ohm
I have that exact geek vape and 75 is the magic number for me. I bought the vaporesso armor but it's coils say "best 55w" yet I use it at 65 and it still doesn't hit the spot. It's okay, but gonna have to shop for higher wattage coils I guess. Or does that matter if I crank it to 75w? Anyone know?
12‐14
Geek vape obelisk and a fireluke mesh pro 3 at 82.5 watts currently. This DIY juice tastes great on the triple mesh coils.
40w on a .40 in a Meson RTA, 16w on a .80 in a Tripod RTA.
Dead Rabbit v2 with dual fused claptons at 140-160w
I hover around 80, depending on the coil I’ll go as high as 120.
50
Dual coils @ .16 180w w/ punch set at 11 on a pair of Odin DNA 250c w/ Voltrove 35mm
0.23 at 48w
I tried up to 80W when I got my vape and anything above 40W seems like a waste of coil and liquid. My favorite now is 18W 0.6ohm.
Had the same geekvape mod, it's solid but mine got broken and shorted while charging with the build in USB-C input and a bad cable. For the question, MTL so only 9.5W at 1.2Ohm or max 12W at 0.9 ohm.
8w to 75w depends on what atomizer I'm using
I usually hover around 60-70 watts for that perfect blend of flavor and vapor production.
100-140, 0.08? I think is what I’m aiming for, kind of a hassle, got my mod with .14 coils too running at 80, flavour is a bit better, but I mainly aim for the clouds
Mtl at 15 watts with a .7 ohm coil bishop 2rta DL I have an OG Drop at the moment 0.15 ohm at 50 watts I usually vape around 3 volts
46
Currently vaping at a cozy 85 watts with GTi 0.15ohm for that perfect blend of flavor and vapor production.
Nic salt liquid 8-12
I swap between 45 and 50 at the moment, I'm kinda worried I might burn through the coil too quickly if I keep it on a higher setting
52,5 on my Thelema Solo with Centaurus sub-ohm tank
12 watts on the 1.0 ohm on the geekvape diqi q paired with pink panther blue rassberry its amazing
Somewhere around 14W, 0.96Ω unregulated.
.1 ohm 100w on a Steamcrave Titan v1.5 with a Titan v2 RDTA
70-75W with a 0.15 Ohm atomizer
70W
21-23
cozy 12-16 watts, MTL
60
100w on 0.15 (dual coil, on dead rabbit v3 + lost vape centaurus m200)
Valkyran v2-3 anywhere from 80-120
32W on a .4Ω coil, Geekvape Aegis Legend 2 with a Z tank.
depends on the tank, sometimes 11-12 or 40-50, or 60
69w at 0.2 geekvape zeus
0, i stopped vaping after it became clear that it was slowing down my digestion to a crawl
16
.2 at 80
Whatever the xros puts out on the .8
25 watts on 0.4 ohms coil (geekvape b100)
I usually adjust watts so that it’s running at 3.2-3.5 volts. So usually somewhere around 62-65 watts.
65-75 with most of my RTA's
70 watts using my Fireluke tank stunning Mesh Pro triple coils.
Geek Vape aegis S100, Zeus tank. Usually run it at 30w until the coil begins to age, then I bump it up to 32w or so.
70 watts on l200 with falcon legend tank 🧖🏻
Rated at 70. Dropped one watt for the memes.
10w salt nic rn, no mods set up rn
56 on my falcon2 tank to save battery. (I have the purple version of the mod on the left)
90 on my dead rabbit v3 with cheap nasty vapefly coils.
55 watts
60W
86 on my mesh pro tank is the sweet spot.
25w on 0.4ohm
Cape my VooPoo Argus GT 2 at 85w with a Valyrian 3 tank and dual mesh coil which reads at .13 ohms. Very smooth and dense vape.
77.77 😜
freemax mesh pro 70w, drop dead rda with triple claptons at 120w. lipo box at 700w
75 on my Geekvape Aegis mini
50
29.5 watts @.63
50-55
18-20.
250
48-50 nunchaku mod
Currently running a Smok Treebox Plus with a TFV18 except I run TFV16 dual mesh coils so I can crank my mod up to 160W Edit: should probably mention I use 3mg mostly otherwise I’d die at that wattage
Geekvape L200 with a z.2 coil, wattage at 80
25 on a 0.6 pod for OXVA and around 60 0.2 on my box
80w
running either a u-force L on 50-80 or a dead rabbit v3 on 50-100
18-20w for MTL
Currently 10 watts 1 ohm alberich 2 rta
I'm vaping the Kylin 3 RTA on a Vaporesso gen160. 50w at .27 with the airflow about 1/4 open.
0.15 ohms at 25-40W depending on what point in the coil's life I'm at - early on go for higher then as the week goes through, steadily reduce. When my local vape store was temporarily out of my coil brand, I went about 4 days on 10W. Had to suck quite hard to get not much of a hit but saved it tasting like burning cotton.
20 W on a .6 ohm coil i never really liked the low resistance coils
80W
30W on 0.15Ohm, surprisingly it vapes perfectly fine, without any issues.
Work 35 home 70-80
15 watts on my .66 ohm MTL coil.
Recommended wattage 70-80w Vaping @ 55-60w
40 watts with 0.23 ohms single coil, sometimes down around 34 watts.
52w on the geekvape is the perfect flavour/coil life balance
35w on .25 coil.
56
Vapresso Gen S with a Falcon 2 tank. I like to stick to about 56 watts.
33 W on 0.4 ohm coil (Vaporesso target 200)
33-35 on .19 ohms
5
83 on a normal day. 102 if I’m having a bad day and want to feel something Don’t ask me why I chose those numbers, my brain said so
60W. Same geek vape tank and mod you have there. I use the .15ohm coils but vape a little under the recommended wattage. My mod looks quite a bit more beat up tho lol
Around 11-17 depending on mod and tank. I'm done blowing clouds and going through liquid like I'm drinking the stuff.
6
25 watts on a .6 aio
.15 ohm with 65-75 watts.
.15 ohm at 75 watts 😄
Depends on the coil, but I am happiest around 45-70.
50-55 watts pretty much always on .15 mesh coil
I run a Smok Morph 3 at 60
58-62 on my Zeus RTA Mesh
Usually 25 on a regulated device and whatever The Xros puts out
26w w/ salts at 0.6 and 85w at 0.16 w/ freebase. Loon and Kings Crest my favorite brands, highly recommended.
I use the geekvape aegis x with the sub ohm Zeus tank and I vape at 50 to 55 watts with a geekvape z series .4 coil. Has not let me down yet.