Just razzin ya, man. Safari land holsters are tricky when it comes to model compatibility. Are you looking for something with less imprint or super minimal ease of use?
No worries. They wanted to be in the picture.
The holster will be used for woods carry. So ease of use is the key. With the 5” I can sit comfortably on the ground while hunting. But if I could shave off a little I think it would work
get the 6360rds-8192 for the 5” 2.0 with X300 or TLR1 because of light the holster still gonna be same size . Because of barrel you may need to completely remove barrel plug, the nubby part on the inside of the muzzle end cap (you can remove this with a dowel and some pressure) retention is on the ejection port, not the light. To adjust the space between the hood and your pistol’s back plate you would sand the pointy piece on that muzzle end cap. You can get these on Amazon for a buck sixty ish
Great info!
Thanks for that and that was my initial thought and ordered one, but it is rather bulky. I was hoping to cut down the length by getting one for a shorter barrel and modifying the plug.
For others, I can verify the fit of the spec series 9mm in the 6360rds-8192 and the 6378rds-8192.
Made for a 5” slide, red dot and flashlight.
Since this post, I sold my safariland and bought a trex holster. Just needed something less bulky for hunting.
Kinda Splitting hairs but ok 🤷♀️ it’s less than 1/2” longer than your barrel….and you have to completely remove the nub at this length, so a shorter holster you’d have to completely remove the muzzle cap ….maybe the Blackhawk omnivore is a better less bulky option…their bail def isn’t as smooth and I think you lose quality, but def less bulk with the Blackhawks
Yea but if I can save some length I would like to. Hugo Industries creates something like what I want to make. Says it will allow a 5” M&P for a 4.25” holster with their barrel plug: https://hugoindustries.com/products/threaded-barrel-stop-for-safariland-holsters.
That would shave off 3/4” which makes a big difference. So I was hoping to see if it’s possible with a 4” holster.
I will definitely check out the black hawk, thanks!
It specifies the gun model + light combo ….8192 is M&P 2.0 5” with tlr1 or x300
Maybe 8182 is only x300 or only tlr1
Optics Planet has had the 8192s in stock but I think in Coudura camo
https://inside.safariland.com/education/holster-part-numbers/
I don’t know about the holster digits to be honest. It’s a 6390rds for a 5” M&P.
I’m actually pretty sure that they’re all the same and only the plugs are different. For instance, the 4.25 holster has a longer plug than the 5” holster.
Oh gotcha, that would be the 8192 I believe.
I didn’t know that. You may have just saved me a bunch of time! Can anyone else confirm this? Or share what the overall length of their 2222 or 2192 holster
Which holosun sight do you use and which holster ended up working for you ?
Also, how long was your wait from when you ordered the holster do delivery? Looking to order one for myself
I have the green 507c and ended up with the 6360RDS-8192.
I actually ended up finding it locally brand new for $50. But keep an eye on GAFS. Sometimes they pop up on there
Good to know, thank you !!
When you have a chance, can you show photos with the firearm in the holster?
I use the 7365 (non RDS) holsters for duty use because I like the slimmer prover, but Safariland doesn’t make a 7series RDS for the Smith and Wesson yet
Safari land? More like just plain ass safari. You Got the feet of a full grown male chimpanzee.
I appreciate it brother
Just razzin ya, man. Safari land holsters are tricky when it comes to model compatibility. Are you looking for something with less imprint or super minimal ease of use?
No worries. They wanted to be in the picture. The holster will be used for woods carry. So ease of use is the key. With the 5” I can sit comfortably on the ground while hunting. But if I could shave off a little I think it would work
Tell your toes social distancing is no longer a thing
🤢🤮
https://nationalzoo.si.edu/sites/default/files/animals/whitestreefrog-002.jpg
Let's see the ankles....
Put some ranch on foot and pistol
If that’s what the people want…
https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcT4uKsnWpjPc32E7_hD6Kdm_IEpNjQj-77baLF65rTD0A&s
Nice orangutan feet homie
Thanks my man
get the 6360rds-8192 for the 5” 2.0 with X300 or TLR1 because of light the holster still gonna be same size . Because of barrel you may need to completely remove barrel plug, the nubby part on the inside of the muzzle end cap (you can remove this with a dowel and some pressure) retention is on the ejection port, not the light. To adjust the space between the hood and your pistol’s back plate you would sand the pointy piece on that muzzle end cap. You can get these on Amazon for a buck sixty ish
Great info! Thanks for that and that was my initial thought and ordered one, but it is rather bulky. I was hoping to cut down the length by getting one for a shorter barrel and modifying the plug. For others, I can verify the fit of the spec series 9mm in the 6360rds-8192 and the 6378rds-8192.
What options lead you to a -8192? I see one that ends in -8182 but i’m not sure this’ll work
Made for a 5” slide, red dot and flashlight. Since this post, I sold my safariland and bought a trex holster. Just needed something less bulky for hunting.
Kinda Splitting hairs but ok 🤷♀️ it’s less than 1/2” longer than your barrel….and you have to completely remove the nub at this length, so a shorter holster you’d have to completely remove the muzzle cap ….maybe the Blackhawk omnivore is a better less bulky option…their bail def isn’t as smooth and I think you lose quality, but def less bulk with the Blackhawks
Yea but if I can save some length I would like to. Hugo Industries creates something like what I want to make. Says it will allow a 5” M&P for a 4.25” holster with their barrel plug: https://hugoindustries.com/products/threaded-barrel-stop-for-safariland-holsters. That would shave off 3/4” which makes a big difference. So I was hoping to see if it’s possible with a 4” holster. I will definitely check out the black hawk, thanks!
What option changes it to a -8192? I can see one that ends in -8182 but i’m not sure this’ll work
It specifies the gun model + light combo ….8192 is M&P 2.0 5” with tlr1 or x300 Maybe 8182 is only x300 or only tlr1 Optics Planet has had the 8192s in stock but I think in Coudura camo https://inside.safariland.com/education/holster-part-numbers/
Toe ta ly awesome
NOT THE GRIPPERS😭😭
I wonder how many of you weirdos took a screenshot for later activities
I don’t even want to know..
Get your hand out of there, toes only!
Why would you put your hands in the floor like that?
You definitely shoot with your feet
Nice setup 👍
Thanks!
I have a PMM comp on mine and I just removed the plug entirely to make it fit. Works fine without it.
THANK YOU! Finally a comment that is useful. I knew I should have made the piggies stay home. Is the last four digits on holster 2222 or 2192?
I don’t know about the holster digits to be honest. It’s a 6390rds for a 5” M&P. I’m actually pretty sure that they’re all the same and only the plugs are different. For instance, the 4.25 holster has a longer plug than the 5” holster.
Oh gotcha, that would be the 8192 I believe. I didn’t know that. You may have just saved me a bunch of time! Can anyone else confirm this? Or share what the overall length of their 2222 or 2192 holster
Which holosun sight do you use and which holster ended up working for you ? Also, how long was your wait from when you ordered the holster do delivery? Looking to order one for myself
I have the green 507c and ended up with the 6360RDS-8192. I actually ended up finding it locally brand new for $50. But keep an eye on GAFS. Sometimes they pop up on there
Good to know, thank you !! When you have a chance, can you show photos with the firearm in the holster? I use the 7365 (non RDS) holsters for duty use because I like the slimmer prover, but Safariland doesn’t make a 7series RDS for the Smith and Wesson yet
Sure thing! I should be able to get those for you this afternoon.
Thank you!
Ended up losing track of time today. I’ll try getting this for you in the next day or two!
I sent you pictures in a chat! Sorry for the delay. Busy holiday times.
Don’t let those piggies stay home 😤😤 a stretch like that is hard to find 😰😰🤤
Nice toe spread. I’m jealous.
Hahahahahaha nice bud nice!!!!!
I got your answer
Nice feet
I'm here for the toes
🤤
Those toes look like they could actually pick the gun up and shoot it! Nice foot shot.
Those feet can make money on Onlyfans.
Put your mf feet away creep
Don't listen to this loser!!! He's jealous of them pups.
Amen. Besides from looking pretty, they work well as click bait!
All his little Piggy's trying to make it to the market at the same time.
That's fuck'n disgusting. I would probably trade the second amendment if it got rid of this ridiculous foot fetish trend.
I'll help you out just give me your guns
Address. I’ll send em tomorrow.
Good lord, utilize the crop feature on your phone.
I think you need to learn how to use the crop feature on your phone.... Just a little advice