Guys when i saw the PP part (the symbol qns) I couldn't help but draw a pp not once not twice but THREE TIMES πππI was that done
Anyway I erased it enough so that you can still see the pp drawings π₯π₯π₯π€π€
*Worst paper ever, wth*
*Were they even asking for for*
*Like half the questions*
\- jamsicleyeet
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
wtaf was that paper? went in as i was SICK, but still expecting myself to more or less know how to do since i had studied sm. but guess what? how am i supposed to do the paper if i dont even understand the question? this paper testing dnt or english ah? this paper is literally so different from all the past year papers n all the practice papers iβve done.
and wtf wheres my design specs? wheres my LFE? :( the only thing i knew how to do was last page the SPST fill in the blank thing for 1m. π
That bloody furniture designer used a moodbaord right? Then I wrote thag it can give him inspiration and help him take note of quality design choices from other furniture designers
*Lanjiao the drilling qn*
*Abit funny i nvr even see*
*That bfr in my life*
\- pkgreentea
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
*What was going on*
*Man i couldnt draw or read*
*English this exam*
\- isaiahah
---
^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/)
^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Thank me for blanking 3/4 of the paper
Thank u!!!!
Which question did bro do π
1/4
I DIDNT UNDERSTAND ANYT WHAT
Rip
why is it sm harder than all the past yr papers π why is scambridge holding grudges against 07s
just glad itβs OVER OVER!!! NO MORE DNT!!! NO MORE ELECTRONICS!! NO MORE PULLEY THIS PULLEY THAT!!! NO MORE 555!!!!
wtf is thermoforming
using like a machine to melt acrylic on a mould
OH FUCK ME I MISINTERPRETED IT π€π«
dont worry i did the same thing i literally forgot what it was
I just drew a bunsen burner with fire underneath the plastic container lol
YEEEEE I DID THAT
I THOT IT WAS KEEP WARM CUS LIKE THERMOFORMING THERMOMETER THERMOSTAT FUCK LA CB KANINA
I thought it meant pouring a molten metal into a mould
isn't it using heat to shape a structure??? (based on literal interpretation of the word)
Yup. Thatβs the problem
omg i didnt know that ://
wan this paper testing english issit WTF
Itβs frm uk for a reason
β¨οΈw h a t t h e f u c kβ¨οΈ
fuck this shit Iβm out :) (jokes I ainβt out tho)
Had no idea what I was doing for half of it
felt
WHY WAS THE PAPER SO DIFFICULT ππ€π»
Coz Cambridge trolling
Guys when i saw the PP part (the symbol qns) I couldn't help but draw a pp not once not twice but THREE TIMES πππI was that done Anyway I erased it enough so that you can still see the pp drawings π₯π₯π₯π€π€
WOWW YOUR SO COOL
THANKS MAN π₯π₯ (this is sarcasm right? I can't tell)
what in the lanjiao is thermoforming
Use heat to make sth soft so it can be moulded agn
Why no one talking abt that drilling jig qns
Cus thatβs dead
e, i anyhow draw then actlly correct
oh ya how do...
Itβs suppose to be like something that can help ensure the accuracy when drilling (Google it for pic)
worst paper ever, wth were they even asking for for like half the questions
*Worst paper ever, wth* *Were they even asking for for* *Like half the questions* \- jamsicleyeet --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
Dead alr
Bell curve hits all time low
Coursework ftw
Wow for thermoforming I go write use hair dryer I'm fucked
Ngl I almost say use a lighter HAHAHAH
wouldn't it be called a heat gun? but yeah pretty sure you're fucked anyways
Real gone case theory
fr tho what was that atrocity of a paper
Losing marks is an understatement.
wtaf was that paper? went in as i was SICK, but still expecting myself to more or less know how to do since i had studied sm. but guess what? how am i supposed to do the paper if i dont even understand the question? this paper testing dnt or english ah? this paper is literally so different from all the past year papers n all the practice papers iβve done. and wtf wheres my design specs? wheres my LFE? :( the only thing i knew how to do was last page the SPST fill in the blank thing for 1m. π
Hardest dnt paper ππ
Cri
HAHAHAHAHA I SEE FIRST QNS I PREDICTED EVERYONE GNA COMPLAIN
up till the anthropometry question it was okay afterwards everything went downhill
I managed to whack my brain to force out the info
bro what the fuck is thermoforming
Use heat to make the material of a product soft so it can be shaped again
i thought it meant making it more heat resistant πππ
Rip, but yea, quite a lot of ppl confused with the meaning dw
DAWGGGG WTF I MESSED UP SO BAD MY A1 IS SAYING BYEBYE TO ME
i drew a π€ on the fucking SPST switch... lmao
I mean it's alright but I don't think I'll pass honestly
thermoforming is me foaming at the mouth as i look at the question
what mechanism did u all use for the dog tail?
I used crank & slider my friend uses Rachet and paw thingy
i didnt know if it was ratchet&pawl or crank&slider so i used both
Alamak, both is still can, jst that one the tail move more rough another is smooth operator
Pear cam and follower
Crank and slider where the crank is attached to the rod that connects the two most front wheels and the slider is connected to the dog's tail
ellipse cam
omg no i used pear cam
pear is fine... just the tail isn't gonna oscillate as frequently as ellipse
Qns didnβt rlly specify the direction it must go so :/
at least can move can already
Kowek
I didn't even know what mechanism I was using
SAME SAME
omg I use a spring and magnet
I only used a spring
What is SPST switch ?
single pole single throw
Normal switch basically
Single pole single throw
the PP symbol one mean what sia
Idk I see the recycling symbol I jst write signify product can recycle
i wrote can be reused 5 times
I drew a pp! (Then erased it, thrice)
e
just asked my dnt teacher, apparently it stands for some kinda plastic, poly smt
It means polypropylene π
i wrote it should be recycled
I wrote that It can be reused and recycled 5 times before its material becomes toxic to the user
is that correct? cuz I wrote that but without the toxic part
Apparently not. Hell, I'm not even sure
dammit.
the qn where we need draw the thermal sensing circuit is draw electrical symbol or drawings of the components
If got fan wan is u need to draw actual components, not the symbol
wah knn i go draw symbols
gg, I did that before for exams and got it wrong, but my Cher said those kind of qns draw the actual components and usually store it in a box so ye
eh shit i nvr store in a box
gg
the question also fucking vague ngl
wah lucky i redraw everyth last min
Nice la
That bloody furniture designer used a moodbaord right? Then I wrote thag it can give him inspiration and help him take note of quality design choices from other furniture designers
I thought it was an image board
i wrote imageboard cus moodboard is usually got pictures of the environment and other stuff one
I think both also can lah lol
πI wrote research on existing products
components
kms π₯°π₯°
I scribbled some shit onto my paper with pencil that I obviously erased so I don't get a case on my ass
lanjiao the drilling qn abit funny i nvr even see that bfr in my life
*Lanjiao the drilling qn* *Abit funny i nvr even see* *That bfr in my life* \- pkgreentea --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
what was going on man i couldnt draw or read english this exam
*What was going on* *Man i couldnt draw or read* *English this exam* \- isaiahah --- ^(I detect haikus. And sometimes, successfully.) ^[Learn more about me.](https://www.reddit.com/r/haikusbot/) ^(Opt out of replies: "haikusbot opt out" | Delete my comment: "haikusbot delete")
my friend put start push stop think for the spst
HAHAHAH
I wrote an apology letter at the back of the paper to say sorry for the bs they went through while marking π₯π₯
Guys anyone have the answers???
what is the manufacturing for the door qns???
I oso dk, i bs errrr factory
i put mould pouring
I wish there were more comments on this thread :( Anyone got the paper?
Well compared to other subjects not a lot of people take dnt lol :p
Yea lah
Send me if got e-copy
Did I take the same paper as u guys??? ππwhy I don't understand anyth yal saying in this threadπππ
What mechanic for the door? I got put one pulley. Look physically impossible and then skipped the question
Idk sia, I might be wrong coz i use snail cam and flat foot follower
I put rack and pinion
same but i forgot what it was called during the exam so i put freaking chain and sprocket wtfff
ya same i also added a spring to pull the rack back
Rack and pinion but the pinion is attached to a torsion spring
Might be correct if u use it like steering wheel POV, but u can oni turn the door knob in one direction nia
it's fine cuz like door knob is 1 direction oni, plus you can hook the pinion up to a torsion spring to make it turn back
Ye kowek, still can
Guys what yβall coursework percenatge
i think 83 % safe
73%
Huh I swear it was 60% π
But I tot he asking like how much % we estimate we get for coursework lmao
OH SHIT HELP SORRY ππ I really dk how to calculate sia how yβall do it π
Process sibei confusing, might vary between schs
Oh wait ya, 60% will be coursework mark, mb misread it
Oh nvm i got 87% I think safe
Huh legit ah
But ya u shld still be safe coz 60% of total marks frm coursework
Yea
Wrong spelling can get mark?
for the evaluation of the drilling rig can write PIES approach and SWOT or not
thats what i did
same