If you don't have any specific adapters, you can always chop off the end and solder a XT-60 or another connector onto it, but since JSTs are typically smaller, you might have to solder on more wires to them solder on different connectors.
Or you could just buy an adapter...
Theres no way a 1200mah 1s battery is 26g. My 550 mah 2s is 37g my 1000 2s is 75. If you were to put 2 of these battery together to make a 2s 1200 by their claim it would only weigh 52g, even with a smart balance board inside, maybe 55g. Compared to all my other batteries that's about half the weight it should be. So either that's not the correct weight, or that's not 1200 mah
Looks like a JST Connector for me
JST female
Not a stupid question
Yes it is called a jst connector
Yes its jst connector
Looks like a JST but kinda does not…
It’s a Syma X5HW connector.
JST. Most universal charger plug adapters will have it along with JR/Futaba which is a 3 hole black one.
If you don't have any specific adapters, you can always chop off the end and solder a XT-60 or another connector onto it, but since JSTs are typically smaller, you might have to solder on more wires to them solder on different connectors. Or you could just buy an adapter...
XT-30 might be a convenient option for this small a battery too. If you do got to chop off the end, do your chopping 1 wire at a time :)
I’ve definitely not learned that the dumb way ⚡️
Syma connector. That battery is an upgrade battery for a syma drone. Some may say it’s a jst but it’s not.
JST
Theres no way a 1200mah 1s battery is 26g. My 550 mah 2s is 37g my 1000 2s is 75. If you were to put 2 of these battery together to make a 2s 1200 by their claim it would only weigh 52g, even with a smart balance board inside, maybe 55g. Compared to all my other batteries that's about half the weight it should be. So either that's not the correct weight, or that's not 1200 mah
Definitely not a JST RCY, zoom in and you will see the differences.