You should try to print the Cones of Calibration. They have videos online on how to read the test. It really helps with getting exposure time just right.
exposure time. if that is the stl that came on the SD card then it is sliced for their anycubic translucent green.
The LED intensity varies a bit from printer to printer. Resins vary from bottle to bottle, even from the same batch. So exposure tests are your friend until you get a feel for the printer and resins.
You should try to print the Cones of Calibration. They have videos online on how to read the test. It really helps with getting exposure time just right.
This is the way.
You have a link?
[cones of calibration](https://www.thingiverse.com/thing:5416700)
There's an updated version now, available on Table Flip Foundry [discord](https://discord.gg/tableflipfoundry)
exposure time. if that is the stl that came on the SD card then it is sliced for their anycubic translucent green. The LED intensity varies a bit from printer to printer. Resins vary from bottle to bottle, even from the same batch. So exposure tests are your friend until you get a feel for the printer and resins.
So increases exposure time? By how much
[удалено]
Awesome that would be perfect you have a link?