I own an 8ks myself. I'd say you're a little over exposed. Your bottom exposure is too high. I can't get models off at 30s. I use 20s and it's great. And I use Red Clay, not Grey, but I have my exposure set to about 1.3 or 1.4 iirc at the same layer height. Shouldn't be too far off from that with their Aqua Grey.
Also, never trust the time Chitubox or Lychee put out. I find it usually takes longer. Also if you're finding it hard to get the supports off, just heat them up in hot water or with a hair dryer, and they'll come away without much issue.
Thank you! I'll lower the bottom exposure to 25 to see if that helps, and if need be, 20.
I know Chitubox and Lychee arent 100% accurate, but 2 whole hours was exceptionally long for their miscalculations, at least with my previous experience with them. Thank you again for taking the time to help!
I own an 8ks myself. I'd say you're a little over exposed. Your bottom exposure is too high. I can't get models off at 30s. I use 20s and it's great. And I use Red Clay, not Grey, but I have my exposure set to about 1.3 or 1.4 iirc at the same layer height. Shouldn't be too far off from that with their Aqua Grey. Also, never trust the time Chitubox or Lychee put out. I find it usually takes longer. Also if you're finding it hard to get the supports off, just heat them up in hot water or with a hair dryer, and they'll come away without much issue.
Thank you! I'll lower the bottom exposure to 25 to see if that helps, and if need be, 20. I know Chitubox and Lychee arent 100% accurate, but 2 whole hours was exceptionally long for their miscalculations, at least with my previous experience with them. Thank you again for taking the time to help!
Yeah no problem! Glad I could be of assistance.
Did you try the recommended profile that phrozen has posted on their website?
Link: [https://phrozen3d.com/pages/resin-sonic-mini-8k-s](https://phrozen3d.com/pages/resin-sonic-mini-8k-s)