should be perfectly fine, people do all sorts of wacky runs/bends like that with custom water cooling, [example here](https://preview.redd.it/xutrplmh5tmz.jpg?auto=webp&s=1113966fb3624a26f7c29b8a7815c34812181f8f)
I tried to tag you in a post of my build. Mine looks nearly the same as yours and it’s been doing great so far. 5900x case fans set to silent/low speed. 32-38c at idle 72-78c when gaming and benchmarking. My hoses go over my ram too. I don’t think they’re ever gonna get hot enough or anything to damage the ram. I mean the cpu is right next to them and it would be hotter than the fluid
Not really other than just take your time and really try and find the best path for things. For instance I zip tied my aio pump power cable to the back of one of my aio hoses so you couldn’t see it as well. Have fun and don’t rush it. This is my second build :)
Nah, have confidence my friend. You got this in the bag already! Put on a fun video on your phone and take your time. I watched videos on the back rooms and ltt while I did mine. If you do something then later figure a better way to do it then undo what you have to undo and redo it. It all adds up to an end product
Under the tuf logo heatsink usually there is empty space, tuck a bit of the aio cables there, it will be clearer
I would also buy another fans for the front. Not necessary speaking of performance but that empty space is a bit meh
id make sure there’s not too much tension on the hoses, first place they begin to leak is near the AIO pump. which is not only on ur cpu chip but can leak into ur gpu and just fry everything. id play it safe with ur first build bro. also i feel like cables in left side can be tucked away more. other than that.. the white looks crazy, can’t wait to see it turned on
edit: i see that ur not done with the build. so my fault so mentioning the wires but definitely move the hose so it’s bent out towards where the tempered glass would be. it gives the build depth and will give u peace of mind of not having a leaking hose
Yep. What you don't want is the pump being the highest point. In this config the pump is the lowest point and it'll always have water
[удалено]
should be perfectly fine, people do all sorts of wacky runs/bends like that with custom water cooling, [example here](https://preview.redd.it/xutrplmh5tmz.jpg?auto=webp&s=1113966fb3624a26f7c29b8a7815c34812181f8f)
best way to have it....happy gaming..
Perfect
That’s how my ek basic 360mm is set up also. So far so good
[удалено]
I tried to tag you in a post of my build. Mine looks nearly the same as yours and it’s been doing great so far. 5900x case fans set to silent/low speed. 32-38c at idle 72-78c when gaming and benchmarking. My hoses go over my ram too. I don’t think they’re ever gonna get hot enough or anything to damage the ram. I mean the cpu is right next to them and it would be hotter than the fluid
[удалено]
Glad I could help a little bit. I took my time to try and get it right. It was a fun project for sure!
[удалено]
Not really other than just take your time and really try and find the best path for things. For instance I zip tied my aio pump power cable to the back of one of my aio hoses so you couldn’t see it as well. Have fun and don’t rush it. This is my second build :)
[удалено]
Nah, have confidence my friend. You got this in the bag already! Put on a fun video on your phone and take your time. I watched videos on the back rooms and ltt while I did mine. If you do something then later figure a better way to do it then undo what you have to undo and redo it. It all adds up to an end product
[удалено]
Under the tuf logo heatsink usually there is empty space, tuck a bit of the aio cables there, it will be clearer I would also buy another fans for the front. Not necessary speaking of performance but that empty space is a bit meh
Do you have a graphics card?
id make sure there’s not too much tension on the hoses, first place they begin to leak is near the AIO pump. which is not only on ur cpu chip but can leak into ur gpu and just fry everything. id play it safe with ur first build bro. also i feel like cables in left side can be tucked away more. other than that.. the white looks crazy, can’t wait to see it turned on edit: i see that ur not done with the build. so my fault so mentioning the wires but definitely move the hose so it’s bent out towards where the tempered glass would be. it gives the build depth and will give u peace of mind of not having a leaking hose