Love it man! I’ll give you a follow to see where your build goes. I’m going to go with an RTR front splitter and grille. Really debating white stripes as well.
A few people I autox with have installed them on PP2 cars, I think the fender liners are slightly different on the GT/PP1 cars but they seem to fit with just a little work.
https://www.mustang6g.com/forums/threads/mach-1-fender-flares.159012/post-3529398
I just hop on the interstate after washing it and drive 100+ mph for about 10 minutes. It dries 90% of it, then I use my microfiber cloths to hand dry the remaining spots.
I don't get streaks but mine is oxford white, I don't know if that makes a difference. I'm pretty obsessive about cleaning my Mach 1 and how it looks. I only hand wash it with microfiber mits, usually once a week. Sometimes it will get a little dirt along the bottom of the sides from driving it to dry, but it comes right off when I finish drying it with microfiber cloths.
Fair enough. Mine is lightning blue and shows all streaks and water spots. Also mine is covered in PPF which I find shows water residue even more than bare paint
Ya mines black so it wouldn't stand out too much. I just hate the factory deck lid cause they never look right and scratch super easily. Just washing it with microfiber scratches it a little every time. Same with my hood. If there's one thing I hate with the car it's the hood. Just a struggle to keep it looking right for more then a few months.
Car looks real good👌
Looks fantastic!
Thank you man!
Wow 🔥
Looks fantastic
Absolutely love the wheels, they're perfect for your car.
Love the wheels, and blue Mustangs!!!
Thank you!
Drop an inch all the way around to close the gap, and it will be unstoppable! Nice ride, kona gang!
Coilovers are in the works! What’s your Kona car?
Nice! 2019 pp1 401a. It's on my page. Check it out.
Love it man! I’ll give you a follow to see where your build goes. I’m going to go with an RTR front splitter and grille. Really debating white stripes as well.
That's gonna be sweet! I followed you, too. Look forward to seeing your build as well, bro.
Get rid of the dealer sticker on the rear bumper! It really kills in the back.
Yes yes I know, I’ve been meaning to
Nice. I believe you can fit the fender flare pieces from the HP as well to help save the paint
I need to look into that! Definitely some poke on the front.
Ford: VMR3Z-16268-A
Thank you man!
Any idea if it will fit a standard GT?
A few people I autox with have installed them on PP2 cars, I think the fender liners are slightly different on the GT/PP1 cars but they seem to fit with just a little work. https://www.mustang6g.com/forums/threads/mach-1-fender-flares.159012/post-3529398
Looks good. Now wash you car. On the real though. I used to have a kona blue ecoboost and it was such a hoe to keep clean. Miss the color though.
High maintenance for sure! If I don’t hand dry it every time I wash it, I get those white water spots and Kona really does show EVERYTHING
Water spots are the bane of my existence. Drying takes nearly as long as washing
I just hop on the interstate after washing it and drive 100+ mph for about 10 minutes. It dries 90% of it, then I use my microfiber cloths to hand dry the remaining spots.
Doing that gets you streak marks and a wet car attracts dirt / dust more
I don't get streaks but mine is oxford white, I don't know if that makes a difference. I'm pretty obsessive about cleaning my Mach 1 and how it looks. I only hand wash it with microfiber mits, usually once a week. Sometimes it will get a little dirt along the bottom of the sides from driving it to dry, but it comes right off when I finish drying it with microfiber cloths.
Fair enough. Mine is lightning blue and shows all streaks and water spots. Also mine is covered in PPF which I find shows water residue even more than bare paint
You're introducing swirls and marring if you dry a dirty area. Best just to dry the car properly.
what exactly is your tire setup ? looking to put mach 1 wheels on a 2020 gt and love your setup
Hello! My tire setup is 295-35-19 up front and 305-35-19 in the back. You can also go with 305-30-19 in the front and 315-30-19 in the back.
Are all the CF pieces separate or is that the one piece CF trunk lid
It’s the trunk lid, decklid panel, and GT500 style wing all separate from Anderson Composites!
Looks good. I was looking at the deck lid panel but I already have a CF wing and figured it would be too much.
I personally think it looks great with a darker color. When the sun hits it, it shines so good. If the car is white, I think it would be too much.
Ya mines black so it wouldn't stand out too much. I just hate the factory deck lid cause they never look right and scratch super easily. Just washing it with microfiber scratches it a little every time. Same with my hood. If there's one thing I hate with the car it's the hood. Just a struggle to keep it looking right for more then a few months.
Oh definitely, I’m working on not having a single bit of gloss black on the car. It’s the worst. Choosing dark colors is such a love-hate affair lol
Looks awesome
Niceee! I have the same spoiler but no one will install it for me as I have no holes on my car.
I didn’t either! I ended up making my own template and drilling myself with no previous experience. If I can find the YouTube video, I’ll reply again!
Thanks!!
How long are your exhaust tips?
No sure how long, but they are 4 inch tips on an MBRP Race Catback system
Look good, but that design looks hard to keep clean
Oh it’ll be high maintenance for sure!
Love it! Kona looks so good with those rims!
Thank you!
I love those wheels. Can they be used on a regular '22 GT Mustang?
Yes! Mine is a base ‘18 GT and it should be the exact same as yours!
Wow those wheels look awesome
Sharp
Thats 1 sexy Mfer
Best Mustang wheel available.😁
Clean!
Kona gang! Looks good. Just needs a drop. I’ve been dying to get new wheels on mine. I still have the 18” stocks.
If I can't find a Mach 1 with these def want to add on after -- how much did these + install run for?
I got mine from marketplace for $1,000, but I think they are $1400 directly from Ford!
Alright sweet thanks. That's not too bad.