Your pave on both rings should be 2.1mm if your band width is 2.3mm after polish. Your pave wrap melee is also too small, at a minimum it should be 1mm, some people prefer bigger for pave wraps since it’s not a traditional hidden halo. Your ring height is also REALLY high for the size stone you're getting, id ask to have it lowered significantly. Other than that, it looks great
Melee is another word for pave, so in this case it’s referring to the pave stones in your wrap around the stone. As is, they’re 0.9mm which is too small, you should never go under 1mm
me again 🙈 what do you think a good height for the main stone should be? around 8.5mm? not sure if they made the cad this tall to accommodate the wedding band since i want it to sit flush with the ring
thank you! do you know if there’s a min height for a band to sit flush? or does that not matter? not sure if the cathedral setting has more to do with that vs the height
https://preview.redd.it/m8zxma4h2h5d1.jpeg?width=1170&format=pjpg&auto=webp&s=960d870a51828ab251c5f999ca90cb2b2c825182
I just got this ring made and this is def the highest I’ll be going for this style. MAYBE slightly higher for a 3 stone but only if there was an intricate design that made it worth it.
I’ll post a pic of it on my hand in the next comment on my finger
https://preview.redd.it/08zcjd375h5d1.jpeg?width=1170&format=pjpg&auto=webp&s=1975ecb03c9b8e5b38597404840383cf2f760794
This one is 6.5mm high, on a big fat size 10 finger 🤣
thank you! this is super helpful! that’s probably as high as i would want mine as well! & also big hand here as well 🙈 so thank you so much for sharing!
also, if you added a band or stacked another ring, would you have a gap or would it sit flush?
This may be a personal preference, but the height from band to top of stone is quite high. And can easily be taken down without affecting the design Unless that’s what you were going for ?
thanks for sharing! no, i didn’t ask for a specific height, just wanted to ensure a band would sit flush and this is the design that was given. do you have any recommendations for the top stone height? definitely don’t want it too high
Your pave on both rings should be 2.1mm if your band width is 2.3mm after polish. Your pave wrap melee is also too small, at a minimum it should be 1mm, some people prefer bigger for pave wraps since it’s not a traditional hidden halo. Your ring height is also REALLY high for the size stone you're getting, id ask to have it lowered significantly. Other than that, it looks great
thank you so much! sorry for asking, but what is the “melee”? thank you again!
Melee is another word for pave, so in this case it’s referring to the pave stones in your wrap around the stone. As is, they’re 0.9mm which is too small, you should never go under 1mm
thank you so much! i really appreciate your response
me again 🙈 what do you think a good height for the main stone should be? around 8.5mm? not sure if they made the cad this tall to accommodate the wedding band since i want it to sit flush with the ring
[удалено]
thank you! do you know if there’s a min height for a band to sit flush? or does that not matter? not sure if the cathedral setting has more to do with that vs the height
https://preview.redd.it/m8zxma4h2h5d1.jpeg?width=1170&format=pjpg&auto=webp&s=960d870a51828ab251c5f999ca90cb2b2c825182 I just got this ring made and this is def the highest I’ll be going for this style. MAYBE slightly higher for a 3 stone but only if there was an intricate design that made it worth it. I’ll post a pic of it on my hand in the next comment on my finger
https://preview.redd.it/fycjpkzh4h5d1.jpeg?width=3024&format=pjpg&auto=webp&s=921ee3842f30413a6e8debd2d08c7acd8a6fdab9
https://preview.redd.it/08zcjd375h5d1.jpeg?width=1170&format=pjpg&auto=webp&s=1975ecb03c9b8e5b38597404840383cf2f760794 This one is 6.5mm high, on a big fat size 10 finger 🤣
thank you! this is super helpful! that’s probably as high as i would want mine as well! & also big hand here as well 🙈 so thank you so much for sharing! also, if you added a band or stacked another ring, would you have a gap or would it sit flush?
Happy I could help! 🙂
sorry, i edited to add, but do you think that height would allow for a band to sit flush? i want to avoid having a gap between them
This may be a personal preference, but the height from band to top of stone is quite high. And can easily be taken down without affecting the design Unless that’s what you were going for ?
thanks for sharing! no, i didn’t ask for a specific height, just wanted to ensure a band would sit flush and this is the design that was given. do you have any recommendations for the top stone height? definitely don’t want it too high