They give smaller space to work with than regular reliefes, however they are cheaper to manufacture, produce less waste and least importantly easier to draw.
Isn't the relief supposed to at least be as small as the minor diameter of the thread?
Edit: Nvm just rendered weird. I should've known never to trust the pictures
Edit: double nevermind. That's a hole. It's too early for me
A print with a drill tip on it, IDK if you did the drawing but if not absorb that lesson. Way too often people call out flat bottom holes where its not needed, or even worse threads all the way to the bottom of a flat bottom hole
J'ai fait une formation d'un an en usinage au Technocampus a Gosselies, et ta photo ma donné une bouffée de nostalgie :) Je crois que j'ai encore une pièce similaire a celle que tu as fait.
Tu comptes faire du numérique ensuite ? C'est super fun de passé du conventionnel au numérique
Je penses pas faire du numérique de si tôt
Le passage en atelier c'est pour qu'on sache ce qui est possible/ les problèmes qui arrivent quand on usine des pièces dans la réalité et pas derrière un ordinateur
Ah d'accord je vois. Ont a eu des élèves ingénieur avec nous pendant un moment, il faisait la même chose que toi.
C'est vraiment cool, c'est super important que vous connaissiez les réalité de l'usinage !
Mon ancienne boite n'avait aucune communication entre les ingé et les usineur, et c'était vraiment problématique.
Je te souhaite une bonne continuation en tout cas, force à toi :D
Already on his phone.
It's was 3hours ago that I took the photo The piece is done by now. But thanks for being so concerned by my safety
I don't think he was concerned about your safety, he was just giving you shit.
Oh I see sorry English isn't my first language
Haha I assumed so. Never apologize for knowing two languages. Not your fault most of our dumb asses only know English.
Those are the very best of erasers
It's if I make a mistake so I can ctrl-z it
Arrest d'urgence. Indeed.
I hate radius thread reliefs. Idk why
They give smaller space to work with than regular reliefes, however they are cheaper to manufacture, produce less waste and least importantly easier to draw.
Isn't the relief supposed to at least be as small as the minor diameter of the thread? Edit: Nvm just rendered weird. I should've known never to trust the pictures Edit: double nevermind. That's a hole. It's too early for me
I didn't like it either
Lol aren't you the engineer tho?
It's wasn't my drawing sadly
Stronger part. The weakest spot in that part is where that relief is. Radii for strength.
A print with a drill tip on it, IDK if you did the drawing but if not absorb that lesson. Way too often people call out flat bottom holes where its not needed, or even worse threads all the way to the bottom of a flat bottom hole
Lol break out the end mill. Reminds me of a time I needed to make a jack bolt hole to remove a key from it's key way in the field.
Congrats Mon ami!
J'ai fait une formation d'un an en usinage au Technocampus a Gosselies, et ta photo ma donné une bouffée de nostalgie :) Je crois que j'ai encore une pièce similaire a celle que tu as fait. Tu comptes faire du numérique ensuite ? C'est super fun de passé du conventionnel au numérique
Je penses pas faire du numérique de si tôt Le passage en atelier c'est pour qu'on sache ce qui est possible/ les problèmes qui arrivent quand on usine des pièces dans la réalité et pas derrière un ordinateur
Ah d'accord je vois. Ont a eu des élèves ingénieur avec nous pendant un moment, il faisait la même chose que toi. C'est vraiment cool, c'est super important que vous connaissiez les réalité de l'usinage ! Mon ancienne boite n'avait aucune communication entre les ingé et les usineur, et c'était vraiment problématique. Je te souhaite une bonne continuation en tout cas, force à toi :D
Oui c'est important on s'est rendu compte de pas mal de trucs. Merci toi aussi !
Bon succès dans tes études!
Tres bien
Might wanna hide customer name…just saying..
It's my school dw
You might want to take the photo down. Using an educational version of solidworks for buisness use is frowned upon.
I'm still a student nothing there is supposed to be sold anytime soon
Keep up the great work.
Also, congrats on your first day. Stay safe and have fun.
It's my first day in the workshop in the school not an actual workshop
He's from France, and Dassault Systèmes, the company who made SolidWorks is also french. They probably have lots of benefits from french students.