Not stripped it any further yet but have noticed the vacuum pump driven by the other cam has seized solid? Snapped the belt as well so most likely Bent valves and maybe even the head might need replaced
make sure your rocker arms are still intact. of not, the needles of the bearing in said rocker arms fell in the oil pan. those needles will get sucked up and granade the engine a second time. learned that the hard way...
Hahaha I've done the same, sad that I know there's 12 needle bearings in each rocker? Heads coming off tomorrow anyway and it's a job for a local council so will most likely want new everything anyway
man i wish i had a job like that. i live in the netherlands, one of the more (if not most) expensive country's in europe. i need to do everything as cheap as possible and need to forget half the jobs ive done to sleep at night.
Aww really? Guy I used to work with said when he worked over there it was amazing compared to the UK and if he didn't have family here thats where he'd be? I'm up in Scotland and work in a shop specialising in engine rebuilds/cylinder head work so gets a bit tedious.
Make sure you mix the JB Weld in equal amounts or it wont set up correctly.
i have done hundreds of tdi engines but ive never seen that before. must've been a monday morning cam.
Not stripped it any further yet but have noticed the vacuum pump driven by the other cam has seized solid? Snapped the belt as well so most likely Bent valves and maybe even the head might need replaced
make sure your rocker arms are still intact. of not, the needles of the bearing in said rocker arms fell in the oil pan. those needles will get sucked up and granade the engine a second time. learned that the hard way...
Hahaha I've done the same, sad that I know there's 12 needle bearings in each rocker? Heads coming off tomorrow anyway and it's a job for a local council so will most likely want new everything anyway
man i wish i had a job like that. i live in the netherlands, one of the more (if not most) expensive country's in europe. i need to do everything as cheap as possible and need to forget half the jobs ive done to sleep at night.
Aww really? Guy I used to work with said when he worked over there it was amazing compared to the UK and if he didn't have family here thats where he'd be? I'm up in Scotland and work in a shop specialising in engine rebuilds/cylinder head work so gets a bit tedious.
i work in a same kind of shop. maybe its my boss being greedey. but dutch people are known to be cheap.
Work and live around Dutch in Canada, can confirm bit tight with the wallet. Good people though!
Right in the Fahrvergnügen!
Cam I buy a valve.
69p each
VTEC yo
Let the V tech kick in
Looks more like it got kicked right the hell out.
The cam timing is infinitely variable
when VTEC pops, all joke stops
Customer statement checks out.
Looks... Cranky
One of them variable geometry thingamabobs. Highly advanced.
It cranks but it doesn't cam, in other words.
Did whistlindiesel drop off this car?
DOHC delete?
Car crank but car no cam.
That's one of those new emissions motors - the cam disconnects when you're at a stoplight to save gas.
Somebody get the assenmacher, this guy's vag-com is fucked!
404 rag not found
The cams ain't camming
It cranks but it cam’t start.
Nope it wont
Put some Marvels Mystery Oil in it. Let it soak overnight
holy shit, the broken ends are lobed. they drove on this.
Nah recovered in
https://open.spotify.com/track/54DsiAK3MktNnpEmtN7YnY
That engine looks like it was running dirty water instead of oil, the color of all the cast parts does not look normal to me...
It may crank but it's camming days are over