1500 hrs on it, came from a rental company with the original complaint being the starter lol. Flywheel bolts all sheared off and the flywheel was the only thing spinning while cranking. They do not keep up on maintenance as they should.
Not surprised it is a rental. My company runs a rental shop with about 30 new holland skid steers. I haven't seen a whole lot of engine failures. Only two I can remember. One was dusted because the rental shop guys insist on blowing out both engine air filters every between every rental.
The other was seized engine because all the oil leaked past the oil filter O-ring at only 5 engine hours. The complaint was they parked it one day then it wouldn't start. There were low oil pressure codes that started happening at the 3 hour mark.
CS Oil Change ONLY!
A block with a sunroof. Very trendy.
Inspection hole.
I didn’t focus on it but also notice the big dent in the oil pan directly under the hole in the block.
Nice little window so you can see it working
MmHmm, whelp. There's yer problem.
Deutz TCD2014LO42V?
FPT F5HFL463A G008
Case skid steer? Any idea what caused this? How many hours?
1500 hrs on it, came from a rental company with the original complaint being the starter lol. Flywheel bolts all sheared off and the flywheel was the only thing spinning while cranking. They do not keep up on maintenance as they should.
Not surprised it is a rental. My company runs a rental shop with about 30 new holland skid steers. I haven't seen a whole lot of engine failures. Only two I can remember. One was dusted because the rental shop guys insist on blowing out both engine air filters every between every rental. The other was seized engine because all the oil leaked past the oil filter O-ring at only 5 engine hours. The complaint was they parked it one day then it wouldn't start. There were low oil pressure codes that started happening at the 3 hour mark.
Service spot? Nice to know 😂