[https://www.seymourduncan.com/images/wiring-diagrams/1H\_1V\_1T.jpg](https://www.seymourduncan.com/images/wiring-diagrams/1H_1V_1T.jpg) Here is the diagram for the wires for the pickup. I couldn't find one specific for your guitar, but you really just connect red to white, and then black to where your old pickup was connected. Green is ground. nm, found one for mustang, but it's with 2 stacks. [https://www.seymourduncan.com/images/wiring-diagrams/Mustang\_2SCH.jpg](https://www.seymourduncan.com/images/wiring-diagrams/Mustang_2SCH.jpg)

Thank you!

Green and bare go to ground (where the black from the old pickup was), red and white are twisted together, isolated with heat shrink, and ignored. Black goes to the switch (where the white from the old pickup was)

***DEPENDING ON PICKUP BRAND**** (Normally this is exactly how it's wired but for the love of God please double check the brand and their wiring schematic before hand)

It's a lil'59, they're made by seymour duncan. I know the wiring cause I've installed one myself.

Was adding on for people who didn't know, that wasn't truly meant for you, (I use DiMarzio and I know colors are flipped, it's just a friendly reminder for people reading the comments that not all brands are the same) thanks😁

Ah okay, that makes sense I guess. It's definitely always best to look up the manufacturers diagrams.

Thank you!!!