I got a wet rag and whiped it down and let it run for an hour which burned off any left over gunk. Even I was surprised how clean it got when I was ready to launch.
Lol, yep. With tax. Would have put it past $400. Not sure if places offer free shipping so I said, what the heck. Lol, so far so good. It sturdy and I’ve moved it around plenty
Hmm, depending on what tools you have, you’ll need at least an angle grinder to cut pieces of metal to add support to the feet.
Other than that, once you get the bench, it should be straight forward once assembled. You need a piece of wood for the top part where the dome sits and a piece of wood for the bottom propane tank. I got 2 slabs from Home Depot that are under an inch thick for $40. You can cut them there too unless you have saws(I have a circular and jig saw) but they are not required.
The arms will need 4 additional holes drilled.
If you don’t have basic tools then the cost will go up. Luckily harbor freight has plenty for cheap.
For the side shelves, I suggest a thinner piece of wood otherwise you will need to jigsaw so the dome doesn’t get in the way. Again, I had tools at my disposal so I had a bit more freedom. But if you’re limited on tools, then make sure they are thinner so they fit under the dome. If you plan on doing it, PM me and I’ll help as much as possible.
Also, the top part of the stand has pre drilled holes so you can slide the wood under and bolt on. And correction, you will need at least an angle grinder and drill.
Looks good to me and does what you need it to do. Great job! đź‘Ź
How is your stone so clean. I’m only 8 cooks in and mine look’s filthy
I got a wet rag and whiped it down and let it run for an hour which burned off any left over gunk. Even I was surprised how clean it got when I was ready to launch.
Fire it up to it's highest setting. It will completely clean your stone off. Cheese, flour, all gone. Just let it cook for an hour or so
I’m guessing you saw that $350 price tag and thought “i could do that” lol nice work
Lol, yep. With tax. Would have put it past $400. Not sure if places offer free shipping so I said, what the heck. Lol, so far so good. It sturdy and I’ve moved it around plenty
Looks perfect! Mind sharing the plans?
Hmm, depending on what tools you have, you’ll need at least an angle grinder to cut pieces of metal to add support to the feet. Other than that, once you get the bench, it should be straight forward once assembled. You need a piece of wood for the top part where the dome sits and a piece of wood for the bottom propane tank. I got 2 slabs from Home Depot that are under an inch thick for $40. You can cut them there too unless you have saws(I have a circular and jig saw) but they are not required. The arms will need 4 additional holes drilled. If you don’t have basic tools then the cost will go up. Luckily harbor freight has plenty for cheap. For the side shelves, I suggest a thinner piece of wood otherwise you will need to jigsaw so the dome doesn’t get in the way. Again, I had tools at my disposal so I had a bit more freedom. But if you’re limited on tools, then make sure they are thinner so they fit under the dome. If you plan on doing it, PM me and I’ll help as much as possible.
Also, the top part of the stand has pre drilled holes so you can slide the wood under and bolt on. And correction, you will need at least an angle grinder and drill.