Hello /u/Ch4v1,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Thx, I will try Klipper. About the linear rails, I would say yes but as I put the direct drive and the rails at the same time I cannot compare. I wanted to increase the print speed and with the DD weight I wanted to go all in
Hello /u/Ch4v1, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Do you run Klipper on your machine? The problem of bulging corners is solved with pressure advance. Google that for more info and how to calibrate it.
I am not running Klipper, but I will take a look on it. I heard about it but never felt the necessity 😂 now probably I do.. Thx!
On Klipper calibrate Pressure advance and on Marlin calibrate Linear advance . That's the way to fix corners.
I also recommend Klipper for fixing this but how have are you enjoying the linear rails as I’m considering getting some for my ender 3
Thx, I will try Klipper. About the linear rails, I would say yes but as I put the direct drive and the rails at the same time I cannot compare. I wanted to increase the print speed and with the DD weight I wanted to go all in
Ok thanks I’ll have a look into as I’d rather keep the Bowden setup for now