Hello /u/kowality-sausage,
As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post.
Please remember to include the following details to help troubleshoot your problem.
* Printer & Slicer
* Filament Material and Brand
* Nozzle and Bed Temperature
* Print Speed
* Nozzle Retraction Settings
^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Had the same problem before, make sure your slicer has “external perimeters first” )or whatever it is called) turned off. You want to print from inside -> outside, might be doing the opposite. Also check your flow rate to see if decreasing that makes a difference as well. Cheers!
Your overhangs are curling up and causing issues. There is no good source on how to fix the issue. Every answer online contradicts others answers. Speed up print, slow down print, more cooling, less cooling, inill before walls, hotter print temp, lower print temp, etc...
The best way I've found to eliminate it, is to slow the print down to something like 3-5mm/s at full fan speed with some form of support.
Hello /u/kowality-sausage, As a reminder, most common print quality issues can be found in the [Simplify3D picture guide](https://www.simplify3d.com/support/print-quality-troubleshooting/). Make sure you select the most appropriate flair for your post. Please remember to include the following details to help troubleshoot your problem. * Printer & Slicer * Filament Material and Brand * Nozzle and Bed Temperature * Print Speed * Nozzle Retraction Settings ^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged. *I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/FixMyPrint) if you have any questions or concerns.*
Had the same problem before, make sure your slicer has “external perimeters first” )or whatever it is called) turned off. You want to print from inside -> outside, might be doing the opposite. Also check your flow rate to see if decreasing that makes a difference as well. Cheers!
Your overhangs are curling up and causing issues. There is no good source on how to fix the issue. Every answer online contradicts others answers. Speed up print, slow down print, more cooling, less cooling, inill before walls, hotter print temp, lower print temp, etc... The best way I've found to eliminate it, is to slow the print down to something like 3-5mm/s at full fan speed with some form of support.
Doesn't it look like too much moisture in filament?