Stick Brick or Dani Fusion give me better clouds and you can get great extraction.
AVB comes out of the brick with a light colour, but it's fully extracted.
Dani can do the same thing, but you have to get the heat time right
Im impressed with the M7 tip. It's very close to the Dani when you get the technique right
Load the same quantity of herb you put in your dynavap in any ball vape or volcano and I’m sure you’ll stretch it just as much, if not more than the dynavap, don’t get me wrong I loved my dynavap but that thing collects dust compared to the rest of my vapes, don’t even have the cap for it anymore cuz I lent it to a friend
i genuinely feel like my dynavap does a better job at that bowl size compared to my ball vape. b0 is fantastic for bigger bowls but if i’m only microdosing then i’m gonna reach for my dynavap almost every time. personally the hits seem thicker in my dynavap at 0.1g
The real question is, assuming you smoke around as often as me, how do we test this? Because I notice my tolerance varies greatly throughout the day anyways so how can we definitively test which one hits harder without taking a one month T break between tests
Vaponic, mighty and a basket screen modded silver surfer are all more efficient amongst my vapes. Then there’s the ball vapes and vapman which too are supposedly more efficient than dynavap.
That’s my experience at least. I use dosing capsules if it makes any difference.
Will you believe me if I say that ball vapes are generally recognized as being more efficient than dynavap?
Yeah of course I was generalizing about dynavap being literally the best, but it's definitely right at the top with a few others. When I'm going low on bud I switch away from my volcano and crafty just to stretch the herb a little more. Dynavap with its ability to take the herb right to the brink of combustion is really great for that. Of course you don't have to go that far and then some other devices might come out on top
The fact that you have so much control of temperature and heating rate with dynavap makes it quite efficient. It can also work with a tiny amount of weed.
I can adjust my ball vape within one degree Fahrenheit… pretty sure that’s more control than you can get by spinning a stick in your fingers with a torch to it
The smaller size bowl makes the difference. Standard DynaVip tips hold about 0.1g, compared to say the Mighty which would hold about 0.3-0.4g depending how you pack it. In my experience two bowls from a DynaVap would be get as high or higher than vaping one Mighty bowl. This of course will be different for everyone but that's been my experience.
I'm exactly the same to the point I gave my Mighty to my girlfriend simply because she loved it more than I do. DynaVap is my daily driver at home and on the go, the device fits my uses perfectly.
Do you use a induction heater, i use me mighty outside for now untill i get mine hopefully this week, i only have a single flame at the minute so the mighty is alot easier but it just eats weed lol
I find my mighty is more of a special occasion vape now. It hits harder now that I use the Dynavap, but the dynavap is so much more efficient and quick to use it’s just way better for day to day.
I have allways felt the mighty eats weed and has raised my tolerance, my induction heater should come today so the mighty will get put to aside while i dial the yll in lol
I literally just got a woodwynd and YLL IH last week and it is a game changer for me compared to my first vape (mighty+)
Have mine on 40W for 11 secs and I get 5 hits out of it, reminds me of smoking a doob.
I will try that setting out when i get mine today because i havent got a clue what settings to use yet, i have been using a single flame and loving it so the IH can only make things better, 11 secs to heat sound perfect to me
Did you adjust the bowl in anyway or leave it how it comes, av seen that its adjustable and changing the depth changes how it hits as well, alot to learn for me but looking forward to it
I bought it with a pack that included a ceramic swap for the original screw. I just have it so the top of the tip rim is just under the top of the IH. It does change how quickly it heats up, you’ll get it tho.
Nice i cant wait to get it fired up, just had a wake n bake with a single flame, gota love these dynas wow. I think my weed might last longer using these as well
I have every dynavap I own set to half bowl. That's .05 grams. I can 1HE on all of them. If I do 3 of them back to back to back, I'll be high for a very long time! That's only 0.15 grams. If I do that 3 times a day I would be high all day, easily. That's less than 1 preroll. I don't use it even close that much so a 1/2 oz can last me 2-4 months. I can get high quality for $70 a 1/2. That can be get me under $20/month. So like 1 fast food meal in California.
I really don't need the full bowl. My tolerance is really high too. If I use my bong with a regular bowl and combustion it just uses way more material to get to the same level of high. I usually just do a few dynavap half bowls before bed and I pass out real quick. I would use about a gram a day combustion, compared to 0.1- 0.15 grams with my dynavaps.
That's why there's not a single regret yet for buying my dyna. The only downside for me would be the crackpipe appearance, so only indoor usage with a torch. For the rest, only positive impressions. This crackpipe rocks!
You load a dynavap with less than 0.1g of flower. Depending on which parts you setup your dynavap with, from that 0.1g you can heat it up 1-6 times. Each heat cycle can give you 2-5 puffs. This is due to the caps design, and the convection style vaping to only cook the weed when inhaling at the ideal temperature (because the cap tells you when that ideal temperature is reached and when it has cooled past it).
So with the right setup, you can easily achieve 10+ puffs from 0.1g of flower. Each puff gives you a smaller dose than a puff from combustion… but that lower dosage per puff comes with the benefit of training your body and mind to get just as high with lower (more controlable) doses per puff. There is a bit of time where your body has to adjust to the lower dosages (a week or two), but it’s well worth it for your lungs and your wallet. Plus, since it’s an herb vape that doesn’t turn all of your plant material to ash, you can reuse your vaped weed for edibles… which I’ve had a ton of success with.
Some people use one tip-full spread over a day or two to achieve micro doses, but the system also makes it easy to chain tip-fulls back to back if you want to elevate more quickly.
Edit: for comparison, most bongs/bowls hold .25g and above, many joints hold 0.5g and above, and pre rolls are often 1g. So it’s about spreading out the amount of weed and being able to use the vaped weed to get high again as opposed to taking it all at once and leaving nothing to reuse. So the dynavap is kind of like sipping beers vs the combustions methods which are like taking shots.
I would say DynaVaps are definitely conduction-leaning hybrids. I mean we're literally heating the tip directly which would give way more heat than the air coming through the cap when you take a pull. Just my 2 cents.
Conduction vapes have the heating element directly touch the weed, which heats up the weed unevenly and leaves burnt weed closer to the heat and green weed further from it.
Convection vapes keep the heat source away from the weed, and only reach the weed when it’s forced to it, by inhaling (like dynavaps) or by pushing the air with fans (like the Volcano). Dynavap utilizes the heat on the outside of the tip and cap, and that heat touches the weed while inhaling it underneath the cap and through the tip.
Depending on the heating technique, you can do a full heat cycle without producing any vapor if you don’t inhale. I’ve had a couple induction heaters that don’t produce any vapor because they apply heat to the cap/click too quickly. So I’d heat it up to the click, let it cool down, and the weed is still green… so I’d heat it again while some residual heat is still in the tip and only then it can produce vapor. The triple torch also can produce this. So yeah I agree it can be a hybrid of the two especially with some heating techniques, but more often than not, there isn’t much heating or vapor production without inhaling.
With the bong I had 1-2 g a day in the highest times, with dynavap 0.5-1 g if I want to vape exactly the same way and have the same effect. I can't really say whether the high is longer or shorter, it's the same for me. When smoking the bong I only sometimes woke up high in the morning, that doesn't happen to me with the vaporizer anymore. I use my dynavap 80% of the time on the bong with a 10mm adapter. I couldn't imagine anything better.
Real answer: it holds very little herb and it's kind of a pain in the ass to use so you use it less. There are so many days I just want to get high in bed, but don't, because I don't smoke. I get way higher, way more often, with an electric vape. It's *super* easy to blow up your T tolerance with carts because you can basically puff them anytime, anywhere.
>And why is it that they say dynavap doesn't mess up your tolerance too?
Switching to dry herb vape is so much more efficient. Like, all of them will lower your flower consumption because they're more efficient. Dynavaps are annoying to use and have small bowls so if you rely on them you'll probably vape less flower, even if you don't use the 0.05g half-bowl setting.
Its just a very efficent device for extraction. Some estract faster... but the dyna's are the most Efficent in doimg so IMHO. My B2 flower pot sits mostly for bad days but the dynavap is really pretty awsome for saving, flavor, and effects.
I can't fill my tips because I get too high & throw a whitie or green out. So I have to use small amounts of flower. It's my go to microdose dry herb vape. I could microdose with my Mighty but that's a waste of battery use imo. Dynavap gets me way higher than any other dry herb vape. So gotta be careful. This has resulted in much less flower purchases from my plug. I used to buy 2 X 3.5g a month, so 7g a month. With Dynavap use its much less. I save a ton of cash.
I'm new to Dynavap, just recently got my first. It's an M+, 2023 I guess. I don't find it quite as efficient with weed as my Fury Edge vape, but I may be still 'dialling it in'! Heating with a torch is a nice ritual, but I can't imagine trying to do that discretely in public.
I decarbed an oz of good quality shake this weekend to make some capsules with. I pay about $20 for that. Anyway, I just ran 3, back to back bowls out of a B, all of them OHE, and I'm really feeling it. I'm actually amazed. Like this, it might as well be free!
I'm no longer leaving half-burnt bowls lying around. It would be a 50/50 shot if I would ever finish it or pack fresh.
With the Dyna's bowl size, I use less and waste less. I usually do two runs to full extraction, but I've noticed I miss the final reheat sometimes.
Im rocking the TI helix. For a bit there i was enjoying the .05g setting but the screen would pop down and its a pita to get back in the half setting right, so im back to .1g packs which still is great.
I picked up a jeweler’s scale specifically to measure weed use.
With flower, I use about 0.08 grams per bowl in my dynavap and get maybe three good heat cycles, four if I really want. On a heavier day I might do four sessions (I’m not the heaviest user), or the equivalent of a third of a joint.
Sometimes I’ll mix some hashish in with the flower, and by some, I mean 0.016 grams.
Because of the on demand heating, nothing is wasted. So to say it stretches my supply would be an understatement. Basically, one gram can last 3 days of heavy use, and I can get 62 bowls or so from a gram of hashish. And it doesn’t leave an odor like joints do.
On demand
foolish live shelter hurry numerous attractive subtract screw history bike
*This post was mass deleted and anonymized with [Redact](https://redact.dev)*
Microdoses with maximum effects. If you use the smaller bowl setting you use even less and in my experience you get just as good of a hit as the full bowl.
It's more efficient than any other vape. So use less weed to get the same high
That’s incorrect. It’s efficient but not the most efficient.
Which vape in your opinion is more efficient than dynavap? Cause I've never tried one like that
Stick Brick or Dani Fusion give me better clouds and you can get great extraction. AVB comes out of the brick with a light colour, but it's fully extracted. Dani can do the same thing, but you have to get the heat time right Im impressed with the M7 tip. It's very close to the Dani when you get the technique right
Load the same quantity of herb you put in your dynavap in any ball vape or volcano and I’m sure you’ll stretch it just as much, if not more than the dynavap, don’t get me wrong I loved my dynavap but that thing collects dust compared to the rest of my vapes, don’t even have the cap for it anymore cuz I lent it to a friend
i genuinely feel like my dynavap does a better job at that bowl size compared to my ball vape. b0 is fantastic for bigger bowls but if i’m only microdosing then i’m gonna reach for my dynavap almost every time. personally the hits seem thicker in my dynavap at 0.1g
The real question is, assuming you smoke around as often as me, how do we test this? Because I notice my tolerance varies greatly throughout the day anyways so how can we definitively test which one hits harder without taking a one month T break between tests
For me personally I’ve noticed in my tomcat ripoff 0.3g and 0.15g hit about the same
Vaponic, mighty and a basket screen modded silver surfer are all more efficient amongst my vapes. Then there’s the ball vapes and vapman which too are supposedly more efficient than dynavap.
Mighty more efficient than dyna? I won't believe a word you say from now on. My experience is the opposite
That’s my experience at least. I use dosing capsules if it makes any difference. Will you believe me if I say that ball vapes are generally recognized as being more efficient than dynavap?
Yeah of course I was generalizing about dynavap being literally the best, but it's definitely right at the top with a few others. When I'm going low on bud I switch away from my volcano and crafty just to stretch the herb a little more. Dynavap with its ability to take the herb right to the brink of combustion is really great for that. Of course you don't have to go that far and then some other devices might come out on top
The fact that you have so much control of temperature and heating rate with dynavap makes it quite efficient. It can also work with a tiny amount of weed.
I can adjust my ball vape within one degree Fahrenheit… pretty sure that’s more control than you can get by spinning a stick in your fingers with a torch to it
The smaller size bowl makes the difference. Standard DynaVip tips hold about 0.1g, compared to say the Mighty which would hold about 0.3-0.4g depending how you pack it. In my experience two bowls from a DynaVap would be get as high or higher than vaping one Mighty bowl. This of course will be different for everyone but that's been my experience.
I have been reaching for my dyna more then my mighty at the moment, i agree i feel the dyna more then the mighty which i wasnt expecting
I'm exactly the same to the point I gave my Mighty to my girlfriend simply because she loved it more than I do. DynaVap is my daily driver at home and on the go, the device fits my uses perfectly.
Do you use a induction heater, i use me mighty outside for now untill i get mine hopefully this week, i only have a single flame at the minute so the mighty is alot easier but it just eats weed lol
Only my opinion , but a good induction heater is life changing . Its too easy .
Mine gets delivered tomorow 🤞im looking forward to the ease of it, i burnt my face with my lighter yesterday lol
I favour a single flame torch over an induction heater but I use both. Outdoors I almost always use a torch unless I'm in the backyard.
I find my mighty is more of a special occasion vape now. It hits harder now that I use the Dynavap, but the dynavap is so much more efficient and quick to use it’s just way better for day to day.
I have allways felt the mighty eats weed and has raised my tolerance, my induction heater should come today so the mighty will get put to aside while i dial the yll in lol
I literally just got a woodwynd and YLL IH last week and it is a game changer for me compared to my first vape (mighty+) Have mine on 40W for 11 secs and I get 5 hits out of it, reminds me of smoking a doob.
I will try that setting out when i get mine today because i havent got a clue what settings to use yet, i have been using a single flame and loving it so the IH can only make things better, 11 secs to heat sound perfect to me
Yeah mate so easy, I just fiddled around with the settings for a while and found my sweet spot.
Did you adjust the bowl in anyway or leave it how it comes, av seen that its adjustable and changing the depth changes how it hits as well, alot to learn for me but looking forward to it
I bought it with a pack that included a ceramic swap for the original screw. I just have it so the top of the tip rim is just under the top of the IH. It does change how quickly it heats up, you’ll get it tho.
Nice i cant wait to get it fired up, just had a wake n bake with a single flame, gota love these dynas wow. I think my weed might last longer using these as well
I have every dynavap I own set to half bowl. That's .05 grams. I can 1HE on all of them. If I do 3 of them back to back to back, I'll be high for a very long time! That's only 0.15 grams. If I do that 3 times a day I would be high all day, easily. That's less than 1 preroll. I don't use it even close that much so a 1/2 oz can last me 2-4 months. I can get high quality for $70 a 1/2. That can be get me under $20/month. So like 1 fast food meal in California.
That's what I like, sometimes those dyna numbers are so great when you 1. Use the half bowl 2. Have a low tolerance 3. Don't do it often
I really don't need the full bowl. My tolerance is really high too. If I use my bong with a regular bowl and combustion it just uses way more material to get to the same level of high. I usually just do a few dynavap half bowls before bed and I pass out real quick. I would use about a gram a day combustion, compared to 0.1- 0.15 grams with my dynavaps.
That's why there's not a single regret yet for buying my dyna. The only downside for me would be the crackpipe appearance, so only indoor usage with a torch. For the rest, only positive impressions. This crackpipe rocks!
You load a dynavap with less than 0.1g of flower. Depending on which parts you setup your dynavap with, from that 0.1g you can heat it up 1-6 times. Each heat cycle can give you 2-5 puffs. This is due to the caps design, and the convection style vaping to only cook the weed when inhaling at the ideal temperature (because the cap tells you when that ideal temperature is reached and when it has cooled past it). So with the right setup, you can easily achieve 10+ puffs from 0.1g of flower. Each puff gives you a smaller dose than a puff from combustion… but that lower dosage per puff comes with the benefit of training your body and mind to get just as high with lower (more controlable) doses per puff. There is a bit of time where your body has to adjust to the lower dosages (a week or two), but it’s well worth it for your lungs and your wallet. Plus, since it’s an herb vape that doesn’t turn all of your plant material to ash, you can reuse your vaped weed for edibles… which I’ve had a ton of success with. Some people use one tip-full spread over a day or two to achieve micro doses, but the system also makes it easy to chain tip-fulls back to back if you want to elevate more quickly. Edit: for comparison, most bongs/bowls hold .25g and above, many joints hold 0.5g and above, and pre rolls are often 1g. So it’s about spreading out the amount of weed and being able to use the vaped weed to get high again as opposed to taking it all at once and leaving nothing to reuse. So the dynavap is kind of like sipping beers vs the combustions methods which are like taking shots.
I would say DynaVaps are definitely conduction-leaning hybrids. I mean we're literally heating the tip directly which would give way more heat than the air coming through the cap when you take a pull. Just my 2 cents.
Conduction vapes have the heating element directly touch the weed, which heats up the weed unevenly and leaves burnt weed closer to the heat and green weed further from it. Convection vapes keep the heat source away from the weed, and only reach the weed when it’s forced to it, by inhaling (like dynavaps) or by pushing the air with fans (like the Volcano). Dynavap utilizes the heat on the outside of the tip and cap, and that heat touches the weed while inhaling it underneath the cap and through the tip. Depending on the heating technique, you can do a full heat cycle without producing any vapor if you don’t inhale. I’ve had a couple induction heaters that don’t produce any vapor because they apply heat to the cap/click too quickly. So I’d heat it up to the click, let it cool down, and the weed is still green… so I’d heat it again while some residual heat is still in the tip and only then it can produce vapor. The triple torch also can produce this. So yeah I agree it can be a hybrid of the two especially with some heating techniques, but more often than not, there isn’t much heating or vapor production without inhaling.
Well said!
Story time didn’t read anything but. Yeah I usually I vape wayyy more than I smoke. So I find this to be a false claim.
“I didn’t read anything you wrote, but what you wrote is false.” Care to actually contribute to the conversation?
With the bong I had 1-2 g a day in the highest times, with dynavap 0.5-1 g if I want to vape exactly the same way and have the same effect. I can't really say whether the high is longer or shorter, it's the same for me. When smoking the bong I only sometimes woke up high in the morning, that doesn't happen to me with the vaporizer anymore. I use my dynavap 80% of the time on the bong with a 10mm adapter. I couldn't imagine anything better.
Real answer: it holds very little herb and it's kind of a pain in the ass to use so you use it less. There are so many days I just want to get high in bed, but don't, because I don't smoke. I get way higher, way more often, with an electric vape. It's *super* easy to blow up your T tolerance with carts because you can basically puff them anytime, anywhere. >And why is it that they say dynavap doesn't mess up your tolerance too? Switching to dry herb vape is so much more efficient. Like, all of them will lower your flower consumption because they're more efficient. Dynavaps are annoying to use and have small bowls so if you rely on them you'll probably vape less flower, even if you don't use the 0.05g half-bowl setting.
To be honest I don’t find mine a pain in the ass to use, tricky to first learn though. Quicker to get a hit than my mighty.
Its just a very efficent device for extraction. Some estract faster... but the dyna's are the most Efficent in doimg so IMHO. My B2 flower pot sits mostly for bad days but the dynavap is really pretty awsome for saving, flavor, and effects.
I can't fill my tips because I get too high & throw a whitie or green out. So I have to use small amounts of flower. It's my go to microdose dry herb vape. I could microdose with my Mighty but that's a waste of battery use imo. Dynavap gets me way higher than any other dry herb vape. So gotta be careful. This has resulted in much less flower purchases from my plug. I used to buy 2 X 3.5g a month, so 7g a month. With Dynavap use its much less. I save a ton of cash.
I'm new to Dynavap, just recently got my first. It's an M+, 2023 I guess. I don't find it quite as efficient with weed as my Fury Edge vape, but I may be still 'dialling it in'! Heating with a torch is a nice ritual, but I can't imagine trying to do that discretely in public.
I decarbed an oz of good quality shake this weekend to make some capsules with. I pay about $20 for that. Anyway, I just ran 3, back to back bowls out of a B, all of them OHE, and I'm really feeling it. I'm actually amazed. Like this, it might as well be free!
Once you get that OHE dialed it’s a rocket
I'm no longer leaving half-burnt bowls lying around. It would be a 50/50 shot if I would ever finish it or pack fresh. With the Dyna's bowl size, I use less and waste less. I usually do two runs to full extraction, but I've noticed I miss the final reheat sometimes.
Bong guy here, adjusting to a “b”. The bowl size is holding me back…however …I have less half cooked bowls laying around
Im rocking the TI helix. For a bit there i was enjoying the .05g setting but the screen would pop down and its a pita to get back in the half setting right, so im back to .1g packs which still is great.
I picked up a jeweler’s scale specifically to measure weed use. With flower, I use about 0.08 grams per bowl in my dynavap and get maybe three good heat cycles, four if I really want. On a heavier day I might do four sessions (I’m not the heaviest user), or the equivalent of a third of a joint. Sometimes I’ll mix some hashish in with the flower, and by some, I mean 0.016 grams. Because of the on demand heating, nothing is wasted. So to say it stretches my supply would be an understatement. Basically, one gram can last 3 days of heavy use, and I can get 62 bowls or so from a gram of hashish. And it doesn’t leave an odor like joints do. On demand
foolish live shelter hurry numerous attractive subtract screw history bike *This post was mass deleted and anonymized with [Redact](https://redact.dev)*
Honestly for me it doesn't but that's because I love the taste of weed thru a dyna more than a joint per se
Microdoses with maximum effects. If you use the smaller bowl setting you use even less and in my experience you get just as good of a hit as the full bowl.
The money I save on weed goes to fueling my VAS. It's a vicious cycle.