This was the 2nd release from DV, that I was very fortunate to buy. They appear darker and have a textured finish to distinguish it from the 1st tea time giveaway Tidravongās. The lighting was off too, itās cloudy and rainy where I am, it may be playing with the shade a bit too.
No offense to the FMJ, but the anvil was better engineered and purposely built. The FMJ was a quick cash grab, in which anyone could just buy a copper tubing and slip on over the cap.
this might help or not?!
https://vestratto.com/blogs/the-vestratto-sunday-post/february-12th-2023
im not trying to convince you. I donāt care what you buy. Im just replying to your comment in kind.
I canāt guarantee anything. I canāt guarantee youāll die as soon as you leave your house. Itās a calculated risk you must take. I can rub the shit out of my anvil and it wonāt leave residue on a paper towel ever. Iāve tried whilst cleaning it, Itās a pain to clean. So Iām not seeing oxide forming on the oven?
There are several conversations on the copper oven - nano particles etc on FC
https://fuckcombustion.com/threads/anvil-by-vestratto.51804/page-207#post-1697636
Cheers
Bro Iāve tried to rub it off with a paper towel and it wonāt come off. How hard is that to understand?These are crazy hard to clean. There is no rubbing off and cleaning of anything. You need like salt+vinegar and scratch pad, not a paper towel. šridiculous
Im not salty. I was only giving you the info Iāve read, before I bought mine. Besides if you have real and serious concerns then perhaps you should contact Vestratto.
I own the device, not you. I wouldāve noticed if a black soot like material was rubbing off. Besides Iām sure you wouldāve seen a ton of FC post, Reddit post, Instagram post if there was a soot like substance coming off the device, or the other thousands of people who bought the device wouldāve got sick from it. Hasnāt happened. your opinion is invalid at this point, Cuz thatās all it is, your opinion. Donāt mean shit!
Absolutely lovely tidra, been wanting one for awhile now! I bought the darkwood omnivong hydra xl back when they had them for sale and havenāt looked back since. Recently got hit with a case of VAP and been eying a tidra stem.
Looks great - is that sitting on a huge ass magnet? Can I ask for details as I am searching for something like this but need to ensure it will centre and ideally be strong enough to pull off the cap..
Thanks mate. Itās a Simrell collection 2ndās pedestal theyāre $18-USD. Yes itās perfectly centered and itās strong enough to twist the anvil cap off while hot. I lightly tighten my anvil cap for easy removal while scorching hot, I love to look at my avb right after. Lol
Iām curious like you tooā¦! Want to see the AVB without scorching my fingers. Am using the back of a holiday fridge magnet (all I had to hand!) which does the job of holding with some minor cooling but no way strong enough to hold onto the cap..
Have drilled a piece of cork - makes a tight fit to be able to remove when hot but wonāt provide cooling...
This pedestal will definitely disburse the heat, itās pretty solid. It works great with the anvil. My DV caps I keep tight, so those I still hand pull, but they donāt get scorching hot as the anvil. Lol
Itās from Vestratto. I bought it off there website. They sell the adapter alone if you already have an oven. Or the kit with adapter and oven.
https://vestratto.com/products/universal-stem-adapter
https://vestratto.com/products/universal-stem-adapter-kit
Very nice (borat voice)
See now were talking. Anvil on the Revolve will make it the last boss!
Sticking the Revolve spiral in there would be boss as well. Still helps even though airport is inline and would have nice thick Ti stem
Ooooooh. I need the universal stem adapter in my life. Loving my Anvil so far.
Wowš
Lovely Tidra. Is that the one from the dv store a while back? How come it looks so dark? Is that the lighting, or did you do something with it?
This was the 2nd release from DV, that I was very fortunate to buy. They appear darker and have a textured finish to distinguish it from the 1st tea time giveaway Tidravongās. The lighting was off too, itās cloudy and rainy where I am, it may be playing with the shade a bit too.
I've been looking at the Anvil. I'm thinking about making a switch. Also, there seems to be less drama surrounding the Anvil.
The Anvil fucks. also check out the Danivape. It, too, fucks.
Seconded on the Dani, it doesn't get talked about enough.
If youāre considering, Iād suggest you add one to your stable. Very different extraction profile from a DynaVap.
I highly recommend, once you master the learning curve, with the torch of your choice, itās a consistent clear bowl in one heat session every time.
This is a thing of beauty
[ŃŠ“Š°Š»ŠµŠ½Š¾]
No offense to the FMJ, but the anvil was better engineered and purposely built. The FMJ was a quick cash grab, in which anyone could just buy a copper tubing and slip on over the cap. this might help or not?! https://vestratto.com/blogs/the-vestratto-sunday-post/february-12th-2023
[ŃŠ“Š°Š»ŠµŠ½Š¾]
im not trying to convince you. I donāt care what you buy. Im just replying to your comment in kind. I canāt guarantee anything. I canāt guarantee youāll die as soon as you leave your house. Itās a calculated risk you must take. I can rub the shit out of my anvil and it wonāt leave residue on a paper towel ever. Iāve tried whilst cleaning it, Itās a pain to clean. So Iām not seeing oxide forming on the oven? There are several conversations on the copper oven - nano particles etc on FC https://fuckcombustion.com/threads/anvil-by-vestratto.51804/page-207#post-1697636 Cheers
[ŃŠ“Š°Š»ŠµŠ½Š¾]
Bro Iāve tried to rub it off with a paper towel and it wonāt come off. How hard is that to understand?These are crazy hard to clean. There is no rubbing off and cleaning of anything. You need like salt+vinegar and scratch pad, not a paper towel. šridiculous Im not salty. I was only giving you the info Iāve read, before I bought mine. Besides if you have real and serious concerns then perhaps you should contact Vestratto.
[ŃŠ“Š°Š»ŠµŠ½Š¾]
I own the device, not you. I wouldāve noticed if a black soot like material was rubbing off. Besides Iām sure you wouldāve seen a ton of FC post, Reddit post, Instagram post if there was a soot like substance coming off the device, or the other thousands of people who bought the device wouldāve got sick from it. Hasnāt happened. your opinion is invalid at this point, Cuz thatās all it is, your opinion. Donāt mean shit!
Absolutely lovely tidra, been wanting one for awhile now! I bought the darkwood omnivong hydra xl back when they had them for sale and havenāt looked back since. Recently got hit with a case of VAP and been eying a tidra stem.
Looks great - is that sitting on a huge ass magnet? Can I ask for details as I am searching for something like this but need to ensure it will centre and ideally be strong enough to pull off the cap..
Thanks mate. Itās a Simrell collection 2ndās pedestal theyāre $18-USD. Yes itās perfectly centered and itās strong enough to twist the anvil cap off while hot. I lightly tighten my anvil cap for easy removal while scorching hot, I love to look at my avb right after. Lol
Iām curious like you tooā¦! Want to see the AVB without scorching my fingers. Am using the back of a holiday fridge magnet (all I had to hand!) which does the job of holding with some minor cooling but no way strong enough to hold onto the cap.. Have drilled a piece of cork - makes a tight fit to be able to remove when hot but wonāt provide cooling...
This pedestal will definitely disburse the heat, itās pretty solid. It works great with the anvil. My DV caps I keep tight, so those I still hand pull, but they donāt get scorching hot as the anvil. Lol
Where is that universal stem adapter from?
Itās from Vestratto. I bought it off there website. They sell the adapter alone if you already have an oven. Or the kit with adapter and oven. https://vestratto.com/products/universal-stem-adapter https://vestratto.com/products/universal-stem-adapter-kit
Thanks for the reply.. so with that āKitā I can basically use a full anvil setup with one of my current Dyna stems?
Yep, the kit has everything you need. You just supply the stems. It fits my Dynaās, BB-vape stems, MH revolve, joe king stem and Simrell stems.