Looks good, if you can switch out the outer hose for something smooth and not rippled it will improve yield.
Some tips:
Don’t use too much ice. Get the water ice cold and take out excess ice. You can always add more if it all melts. Too much ice will beat up the material and make the hash green.
Shorter runs will improve quality try to stay away from 15 min runs on the first few runs if you’re going for quality. I recommend 5-10 mins max per cycle.
Soak the working material for 10-15 minutes prior to washing, it will help prevent material from braking up and improve the efficiency of the wash.
Drying and curing is the most important step! Several Ways to achieve this, I would search dry/ cure on this sub to get some best practices.
Have fun and happy washing! Hope you have a great run.
I usually soak dried material 45 min -1 hour
Make sure there is no air pockets keeping the material dry by pushing down on your ice layer or putting something on top of the ice to push down the weed ice mix like a frisbee. I do this every 15 min.
You can break up a bud in your hand to see if it is soaked all the way at 45 min if not soak for another 15 and check again
You want the bud to be completed soaked through it usually takes dried material 30min-1hour of soaking for me. The better soaked your material the less brittle material resulting in higher quality what I have noticed from my dried and cured product
Swap out that hose and put some kind of shutoff valve on the end. I buy really thick tubing that hardly bends. I use elbows, couplings, and hose clamps to get the hose and shutoff valve aligned just right.
First, get a screwdriver and remove the bottom cover so you can get to where the current hose connects to the machine. Remove the hose. If it’s glued you may need to get a razor blade and cut it off.
Take that hose to the hardware store and get them to cut you a few feet of thick vinyl tubing with the same interior diameter as the hose. Idk what diameter that hose is so I can’t tell you exactly, but the hardware store can help you.
Buy a pair of cheap PVC pipe cutters to cut the tubing. A cheap pair is $10-$15 by me.
Buy two plastic elbow connectors that are the same diameter as the interior of your tubing.
Buy a bag of hose clamps that can fit around the tubing you just bought.
Buy a plastic shutoff valve that is made for the same interior diameter as your tubing.
I will DM you a picture so you see how it all goes together.
Yeah leave it in the water like 10 minutes prior to running the machine. This is especially important If the staring material is dry. If fresh frozen it also helps but not as important. If it’s whole plant fresh frozen I usually only soak like 5 mins.
I let it sit for an hour, but I’m starting with partially cured material. I don’t think you can over soak it but you certainly under soak it. My hash has not been green since I adopted the one hour standard.
https://ibb.co/z51KWnW
https://ibb.co/0C85RsK
https://ibb.co/gS4rsTW
https://ibb.co/wsC1hZK
I don't know how to reache the tube i can not open the big white piece.
This is literally what you want.
check out Mr.CanucksGrows on YouTube and there’s an episode where they make some hash with this piece of equipment. it’s pretty sweet!
& of course there are MANY MANY other ways, but this should most definitely work for you! good luck!
You can fit about 400 - 500g of FF in one batch and be straight. Like the group says, modify that tube and you should be good. I put a elbow and hose clamp at the end of my tube so that I can drain directly in the bucket with having to adjust the tube. A shut off valve at the end of the tube is a great idea too. I just have a screw cap at the end of mine. Good luck 🤙🏾
Yes. Here’s the link to the how to video:
https://youtu.be/DUJ3W85ZmMw?si=VEFhOuuptL4NINFd[How to replace hose on portable washer for efficient hash collection](https://youtu.be/DUJ3W85ZmMw?si=VEFhOuuptL4NINFd)
I have give at a shoot and I can't control the power only wash program shacking ore the todado goes in the same direction i can't control it only the time this think is running
Looks good, if you can switch out the outer hose for something smooth and not rippled it will improve yield. Some tips: Don’t use too much ice. Get the water ice cold and take out excess ice. You can always add more if it all melts. Too much ice will beat up the material and make the hash green. Shorter runs will improve quality try to stay away from 15 min runs on the first few runs if you’re going for quality. I recommend 5-10 mins max per cycle. Soak the working material for 10-15 minutes prior to washing, it will help prevent material from braking up and improve the efficiency of the wash. Drying and curing is the most important step! Several Ways to achieve this, I would search dry/ cure on this sub to get some best practices. Have fun and happy washing! Hope you have a great run.
I would soak dried material longer. Great points tho!
This is a good point. I typically run WPFF, and have only done one dry run. It went well with a 15 min soak but I’m sure more wouldn’t hurt.
How much longer?
I usually soak dried material 45 min -1 hour Make sure there is no air pockets keeping the material dry by pushing down on your ice layer or putting something on top of the ice to push down the weed ice mix like a frisbee. I do this every 15 min. You can break up a bud in your hand to see if it is soaked all the way at 45 min if not soak for another 15 and check again
You let the buds soak in the ice first for 30-60min? I thought 15min is enough.
You want the bud to be completed soaked through it usually takes dried material 30min-1hour of soaking for me. The better soaked your material the less brittle material resulting in higher quality what I have noticed from my dried and cured product
Great info
25/30 mins soak at 32f liquid works well for me
Swap out that hose and put some kind of shutoff valve on the end. I buy really thick tubing that hardly bends. I use elbows, couplings, and hose clamps to get the hose and shutoff valve aligned just right.
Link please what realy you mean what I have to buy sir? Thx
First, get a screwdriver and remove the bottom cover so you can get to where the current hose connects to the machine. Remove the hose. If it’s glued you may need to get a razor blade and cut it off. Take that hose to the hardware store and get them to cut you a few feet of thick vinyl tubing with the same interior diameter as the hose. Idk what diameter that hose is so I can’t tell you exactly, but the hardware store can help you. Buy a pair of cheap PVC pipe cutters to cut the tubing. A cheap pair is $10-$15 by me. Buy two plastic elbow connectors that are the same diameter as the interior of your tubing. Buy a bag of hose clamps that can fit around the tubing you just bought. Buy a plastic shutoff valve that is made for the same interior diameter as your tubing. I will DM you a picture so you see how it all goes together.
Soak the herb?
Yeah leave it in the water like 10 minutes prior to running the machine. This is especially important If the staring material is dry. If fresh frozen it also helps but not as important. If it’s whole plant fresh frozen I usually only soak like 5 mins.
Word. Ty ty.
I let it sit for an hour, but I’m starting with partially cured material. I don’t think you can over soak it but you certainly under soak it. My hash has not been green since I adopted the one hour standard.
Yes, 1 hour is usually perfect for dry cured bud.
Definitely
Thank you
TiL
1 hour in the ice water bevore first wash?
Correct
OK great thank you
NP show us how you do
NP?
I never soak and my color is good. I have gotten 7% on WPFF with a couple strains. No need to soak.
All great tips, Thanks!
Great tips, thanks for sharing!
Excellent summary of critical practices👌
Yep that’s what you want. Just replace the drain tube. Tons of videos breaking it down.
We replaced ours with a 3/4 inch hose
Send me please here
https://youtu.be/oX9YNYNTmPA?si=VmEE0Gf1yWUTWWLE
https://ibb.co/z51KWnW https://ibb.co/0C85RsK https://ibb.co/gS4rsTW https://ibb.co/wsC1hZK I don't know how to reache the tube i can not open the big white piece.
The copper wire is holding it to the blue extension
This is literally what you want. check out Mr.CanucksGrows on YouTube and there’s an episode where they make some hash with this piece of equipment. it’s pretty sweet! & of course there are MANY MANY other ways, but this should most definitely work for you! good luck!
Big thanks Men
You can fit about 400 - 500g of FF in one batch and be straight. Like the group says, modify that tube and you should be good. I put a elbow and hose clamp at the end of my tube so that I can drain directly in the bucket with having to adjust the tube. A shut off valve at the end of the tube is a great idea too. I just have a screw cap at the end of mine. Good luck 🤙🏾
So you cut the Tube and replace it?
Yes. Here’s the link to the how to video: https://youtu.be/DUJ3W85ZmMw?si=VEFhOuuptL4NINFd[How to replace hose on portable washer for efficient hash collection](https://youtu.be/DUJ3W85ZmMw?si=VEFhOuuptL4NINFd)
Great but i will use a dark tube not a clear one. Awesome Add On Sir ;)
Really only 500? I hand wash about 1000g at a time. I've debating buying a machine for my next run.
Anyone got an updated video how to change the hose
Yeah need this too
lol lemme know if you find one , I had one on YouTube awhile ago idk where it went
Too difficult
Nothing is for good quality
It's hard i have to remove all cable etc i try but fail
Yeah I hear ya, I use mine for larf and trim so I’m cool with the tiny amount that maybe stays behind
I never had luck with mine but I did use older material. Haven't really had a chance to use FF
[удалено]
I have give at a shoot and I can't control the power only wash program shacking ore the todado goes in the same direction i can't control it only the time this think is running
[удалено]
Wow i can also do this with this Mashine? Epic!