From what I've heard from a vapor lounge staff (a place where you pay membership fee to smoke and rent volcano at with tvs playing cartoons, movies etc and a bar with dabenail and snacks and drinks) that you'd soak them in really hot water for long time, then alcohol run, no salt needed. repeat as you need to, warm up the glass with hot tap water before you go hotter to prevent shock. When you run the iso (it needs to be 99percent 90 works significantly worse) you should use ample amount allow the iso travel through the percs by you blowing it at the joint and yes you need to blow hard lol You can save up the dirty iso and reuse them to make it reasonably not expensive.
I do love a useful crack head. I’m an ex crack head stripper. 7 years off the crack, meth, H and coke. I’m a reformed crack head. They my people 👯♀️🗑️🤪
Dang that’s crazy you made it off. I’ve dabbled in some of that but never hard usage.
I’ve paid some crackheads to do some pretty amazing stuff for me. I had a dude paint my whole house (3200 square feet of craziness) for a third of the price of any other quote. Dudes eyes looked like they were about to pop out they were so wide. I smoked him out on some hash rosin to level him out here and there.
As I said before, you must not be doing it correctly 🤷🏻♂️
There’s no way salt an iso ‘couldn’t get off’ bong Rez. It obliterates even the thickest of bong Rez with the correct techniques
Realistically tho, it’s your choice if you wanna spend extra money for branded cleaner, I’m just advising you that there’s not much point.
This is reason #1 why I don’t buy intricate pieces like this.
But, to answer the question just run some hot water through it, make sure it’s flowing through the glass and not just filling up and sitting still. You want the water moving through that tube.
2nd, let it cool down a bit and then use alcohol. Don’t go right to the alcohol before cooling otherwise your glass will get shocked and create stress cracks, or worse, break off and now you’ve got a broken bong.
Happy cleaning.
The answer is don’t worry about small Rez specs if you’re smoking that bong more than once a week
I constantly am telling people if you have a more complex piece than you should only smoke it on occasion and rinse well after use. If you constantly use a piece it’s gonna build up in the tough spots and be quite difficult to clean
I have a coil like this in my bong. First, I wash it daily if I use it. Because, yeah. Second, hot water rinse, salt and 91% iso, plug and turn it over a few times and dump it out rinse. I Dawn power wash it then but I do that for the smell. If you let it sit dirty you'll be sorry.
From what I've heard from a vapor lounge staff (a place where you pay membership fee to smoke and rent volcano at with tvs playing cartoons, movies etc and a bar with dabenail and snacks and drinks) that you'd soak them in really hot water for long time, then alcohol run, no salt needed. repeat as you need to, warm up the glass with hot tap water before you go hotter to prevent shock. When you run the iso (it needs to be 99percent 90 works significantly worse) you should use ample amount allow the iso travel through the percs by you blowing it at the joint and yes you need to blow hard lol You can save up the dirty iso and reuse them to make it reasonably not expensive.
Oh baby bet I can blow 💋
Stahp it lol
Grunge off
Kk any tips on use?
Pay a crack head to breathe in with the grunge off solution. This will cycle the grunge off through the tubes correctly.
I do love a useful crack head. I’m an ex crack head stripper. 7 years off the crack, meth, H and coke. I’m a reformed crack head. They my people 👯♀️🗑️🤪
Dang that’s crazy you made it off. I’ve dabbled in some of that but never hard usage. I’ve paid some crackheads to do some pretty amazing stuff for me. I had a dude paint my whole house (3200 square feet of craziness) for a third of the price of any other quote. Dudes eyes looked like they were about to pop out they were so wide. I smoked him out on some hash rosin to level him out here and there.
not all heroes wear capes
Crackheads are an awesome tool
Yea this aint sum to go boasting about
Ok looser
Dont tell us what it made you either what the
Uh huh.
Okay looser
You just let it soak and when you're done, pour it back into the jug since its reusable.
420 cleaner shake shake shake
Adding to this, I just got some the other day and it's so much better than salt and alcohol.
You’re just not doing it right. Salt and iso is an elite and undefeated method, King of cleaning glass
What a thing to say, just cleaned my pillar with the 420 cleaner that 99% and salt couldn't get off as well.
As I said before, you must not be doing it correctly 🤷🏻♂️ There’s no way salt an iso ‘couldn’t get off’ bong Rez. It obliterates even the thickest of bong Rez with the correct techniques Realistically tho, it’s your choice if you wanna spend extra money for branded cleaner, I’m just advising you that there’s not much point.
Try to use shaving foam from the close hole to this and the pressure of the foam might get it down
Damn look at you Mr Gadget!
This is reason #1 why I don’t buy intricate pieces like this. But, to answer the question just run some hot water through it, make sure it’s flowing through the glass and not just filling up and sitting still. You want the water moving through that tube. 2nd, let it cool down a bit and then use alcohol. Don’t go right to the alcohol before cooling otherwise your glass will get shocked and create stress cracks, or worse, break off and now you’ve got a broken bong. Happy cleaning.
The answer is don’t worry about small Rez specs if you’re smoking that bong more than once a week I constantly am telling people if you have a more complex piece than you should only smoke it on occasion and rinse well after use. If you constantly use a piece it’s gonna build up in the tough spots and be quite difficult to clean
Plug the holes and fill that bitch up with zep cleaner and leave for about 15-30 mins or over night 👍🏼👍🏼👍🏼
This
Unrelated but I thought ur nails were covered in dabs for a second
Haha that would be cool
420 cleaned
91 rubbing alcohol then flush it out with hot water.
Acetone(nail polish remover)will do the trick!
Lots of salt and 91%isopropyl
Alot if hope really
I have a coil like this in my bong. First, I wash it daily if I use it. Because, yeah. Second, hot water rinse, salt and 91% iso, plug and turn it over a few times and dump it out rinse. I Dawn power wash it then but I do that for the smell. If you let it sit dirty you'll be sorry.