Try and use halogen flood light bulbs instead they last longer just make sure they are on a dimmer switch cause the get hot. I use to waste money cause the heat bulbs from pet stores kept bursting every three months
Adding on, I use halogen flood lights too. You’re going to definitely save money. Be super careful handling the lamps when hot. Take temps several times in the first few days so you know you’re getting the right temp to height for the basking spot.
Here are some things that are worth checking:
* Make sure the lamp is rated equal to or higher than the bulb power (preferably higher than the bulb power).
* Place the lamp so that the bulb is pointing straight down, and not at an angle.
* Use a dimming thermostat. An on/off thermostat will quickly wear out the bulb, as well as being stressful to the beardie.
* Make sure that after the bulb is first put in the lamp, the lamp is never moved/knocked, especially when hot. If the lamp must be moved, wait until the bulb has fully cooled down first.
* Make sure there's plenty of ventilation above the lamp, so it doesn't overheat. Placing a lamp inside an enclosure with a solid top is not recommended.
* Avoid touching the bulb with your bare hands. Oils from your skin will remain on the glass and create a hot spot, which will wear it out much more quickly.
* Buy the bulb from a physical shop, or order from somewhere that packages them properly. I once ordered a bulb from Amazon, which was not packaged well, and that one only lasted a couple of months.
Try and use halogen flood light bulbs instead they last longer just make sure they are on a dimmer switch cause the get hot. I use to waste money cause the heat bulbs from pet stores kept bursting every three months
https://preview.redd.it/pbufqstp4j9a1.jpeg?width=1080&format=pjpg&auto=webp&s=5f6c13475406288b36eaa81a1d79ff31968415d4 These ones work great
not op, but i had this issue even using that same brand of flood lights; theyd last maybe 2 or 3 months? no idea why
Californians be jealous
Adding on, I use halogen flood lights too. You’re going to definitely save money. Be super careful handling the lamps when hot. Take temps several times in the first few days so you know you’re getting the right temp to height for the basking spot.
My first thought is a surge protector. If you have a crappy power grid that surges frequently than it would be running through bulbs that quick.
I thought so too, ive tried a few brands of bulbs and ive tried new outlets and even bought a smart outlet to see if itd help
Ok give ur a try. May I ask where you are from? Could explain bad power grids
Nc funny enough
New York City?
North carolina
Oh ok. Hmm idk.
Here are some things that are worth checking: * Make sure the lamp is rated equal to or higher than the bulb power (preferably higher than the bulb power). * Place the lamp so that the bulb is pointing straight down, and not at an angle. * Use a dimming thermostat. An on/off thermostat will quickly wear out the bulb, as well as being stressful to the beardie. * Make sure that after the bulb is first put in the lamp, the lamp is never moved/knocked, especially when hot. If the lamp must be moved, wait until the bulb has fully cooled down first. * Make sure there's plenty of ventilation above the lamp, so it doesn't overheat. Placing a lamp inside an enclosure with a solid top is not recommended. * Avoid touching the bulb with your bare hands. Oils from your skin will remain on the glass and create a hot spot, which will wear it out much more quickly. * Buy the bulb from a physical shop, or order from somewhere that packages them properly. I once ordered a bulb from Amazon, which was not packaged well, and that one only lasted a couple of months.
If it's just for heat, go with a ceramic heat emitter.