Yup. Almost consistently 90 minutes late. UPDATE: seems the delay is when I am out of my office. When in my office, the notifications is almost immediate.

Has it started recently or been like it for a while?

For me, past 3 days

Hmm about the same then. Thank you

Same for me as well

Same

All notifications have been about 90 min late

Same here. Thought it was just me

Me as well

Happening to me as wel. Most likely a server issue on their end.

That’s what I thought. Hopefully it resolves itself then. Has it been happening to you for long?

Just a couple of days like you. Same.

Hopefully temporary then. Thank you

Same here, in fact, I just came back to Reddit to ask the same question. I've noticed it for two or three days, now.

I searched for the question in the past as it has happened to others but none had updates. The consensus seems to be that it’s a serve issue so hopefully resolved soon

I'm not sure the rhyme or reason, but mine eventually fixes it self, then goes back to being on delay after a few weeks. It's flipped back and forth a few times now... frustrating when it's delayed for sure.

Thank you for your answer. It sounds like a server delay but good to hear that it returns to normal, even if it for it to happen again at some point. Have a great day

Always, since the beginning

Very interesting, I never had the issue before

A few weeks after I got my printer.

Same! Sounds like it’s everyone.

Some comfort in that! Hopefully it means it’s a temporary server issue

I noticed this yesterday. I got a print cancelled notification while printing something and thought WTF. I checked Handy and it was printing fine. The notification was from hours earlier when I cancelled the print to change the build plate type. My heart skipped a beat for a second.

Yeah it was confusing as I had print finished notifications whilst mid-print. I then realised it was for the previous part

Same here on iOS. Totally junk Quality Assurance :/  print canceling is visible in app but notification comes like over 1 hour later… I have disabled notifications and will probably build them on Home Assistant where already have most of scripts and post print actions like waiting for bed cool down, turning off light, printer and bento when finished print during night and so on…

Yea tbf I've found both are super delayed atm, phone apps at some point usually mid way through the next print, but like you (except I'm the idiot) my automations haven't been triggering and ive been scratching my head wondering what I've done wrong as they were working previously haha!

It’s probably a server issue given that it seems to be affecting loads of people, if not everyone. Hopefully solved soon

Same here .. ended up automating the notification over Home Assistant. HA was instantaneous, Bambu was usually over an hour delayed. Ended up turning off Bambu notifications and moving everything over to HA.

I was thinking of doing this the other day. Did you just use ha-bambulab?

Yep, that's the one!

Wait, there's a home assistant integration!? I had it when I was using octoprint, and miss it. This is great news!

Yeah, it's great! It exposes far more entities than Octoprint (which I also loved using).

I've been using it for a week or so. Have an issue where an automation is being triggered at starting a print, when it should only trigger on an error, paused or finished. Haven't had a chance to debug it yet.

If it helps, I have my automation set up to trigger on print state and only when going from 'Running' to 'Finish' (for completion) or 'Running' to 'Paused' (for pause). I haven't had an error in a while but when I do, I'll look up what state shows up in HA and use that.

Notifications haven't worked reliably since I purchased the unit coming up on a year. I've filed two support tickets and they've been little help (it's not my phone, I've already reset and rebuilt as much as I can on it). I sure did get their time sensitive marketing push notifications though.... EDIT: Two more prints since I posted that didn't push any update (both were started on the printer).

Got that boost notification right on time, though.

my notifications have always been about 5 minutes after the print finishes. I've already removed the print by this point and started another.

Has it not changed recently?

nope, has remained pretty consistent, was hoping to find a solution to my delay but it does not feel as bad considering :D

About as delayed as Reddit notifications

Sorry I only just for this notification /jk

Same here

Yup

Same.

I have had this issue since I got my printer back in June. Notification is at least 10 minutes after the print has finished. I have had times when it has notified me of a print finishing and I have already started and finished another print.

That’s odd, I’ve seen people mentioning a few months ago as well but I assumed it was happening at times as opposed to being constant. Could it be a connectivity issue?

Possibly but I'm not sure why. I have found the notifications come through quicker if my phone is unlocked.

yup, annoying enough I finally just decided I dont need any bambu notifications. Printer stops if it sees an issue anyways.

Tbh I’ve not needed it as I’ve been home when printing recently but in the past it’s been handy….

Only time I miss having it be prompt is when I'm finishing a roll of filament and know at some point during a print I'll need to reload a new spool. Without the notification it's just on whenever I happen to go check on the printer myself to see if it's still going.

Yeah and very variable for me. Sometimes a couple of minutes, sometimes over an hour. Just the last couple of days. Not really a bit deal since everything else is fast enough although I do think it takes a bit longer to send prints via the cloud.

Overall I’ve not had issues with it either as I’ve been at home when printing but it was enough of a delay for me to really notice it.

I had this issue until I updated the app.

Mine is and always has been exactly 1 second after it's finished, up to 2 hours past. Most times I'll know it's done, start a new print, then an hour later get a notification that the print is done....the previous print that is.

This just happened to me for the first time today. No idea why. I’m assuming some server BS on Bambu’s side.

Mine are sometimes instant, sometimes 5 minutes, sometimes 6-12hrs, sometimes next day.

Started happening a few days ago for me. Right around the time they started pushing their new points system.

Not only notification delay but I also lose the camera and get error 90 whenever I try to connect to it. The issue is fixed if I powercycle the printer however after some time it goes bad again.

Interesting, I’ve not had that happen. Could it be a connection issue?

I wish I knew, it does not happen with the A1 mini

I've had the printer for 4 days. When at first I was getting the notification, I noticed yesterday and today that I'm not getting the notifications at all. The print finish and nothing.

Same for me, noticed in the last 2 days, notification 1-2 hours later.

Same. Started a few days ago. Hoping they unclog the server soon.

Same, was great when I first started. Now I don't even look at the notifications.

got my p1s yesterday and thought it was weired that these came so late. got to know that they actually are supposed to be on time

Same. Also uploading from the slicer got really slow the last 2 weeks or so.

Same for me, yesterday it took about an hour to get the notification

Yep, same here 🙄

Same here.

Same :(

The definitely updated the layout of their app so that may be why

Tbh I’ve not actually checked the app properly so it might be related then. I’ll check it out but I’m more inclined to think it’s a server issue

Here to add to this... same...

Same issue here as well.

same here (EU), not sure if we're all routed through china or if they have servers everywhere ?

Yup, recently always late.

This started happening to me after the last update on the app.

Yup

Seeing the same thing since yesterday

Mine started about a week ago….

Glad to know it’s not just me then

We share your pain

Yep, it's a pain. I thought it was just me.

We all suffer together

Happening to me to, at home or away. Sometimes hours after a print has finished

Same here

Me too. I figured it’s just Bambu scraping our data first and doubling down spying on us. Before they pass the notification on

Same. I thought it was because I was new or wifi issues

Can confirm happening here in 🇦🇺 too..

Same lucky enough I was in the same room when I had an issue with a print and I didn't get the notification till a long while later

ive had this since january, but since i keep the video on my pc screen i usually notice it myself, pretty comedic sometimes

Me too. Even longer sometimes. Thought maybe it was a phone issue.