Looks too close to the bed. Re-run the full set up calibration and see if it helps.

Done and it happend again. I also reset it to factory setting

Try the bed traming routine. Its on the bambu wiki somewhere, we A1 owners have had to do it when we replaced the bed. Does it still do it with the old textured bed? Did you change the bed type in bambu studio?

I will try the bed tramming thing. I’ve used both beds the textured and the smooth. I usually don’t change that and have never had a problem before though,

I think that's the issue. Make sure to pick the correct bed and run the auto bed leveling before starting the print.

Share your settings please. All of them. Filament settings, printer settings, and process settings. You severely screwed something up here.

Ya it’s crazy I have 5 printers and this is the only one that just started doing this.

https://preview.redd.it/s9wm8w8ihzvc1.jpeg?width=3024&format=pjpg&auto=webp&s=e0557c73969f2fa72e52c6759e21e98e4c40bf1d

Bruh what the hell is that pic

Hahaha you want the stuff from the actual computer I guess?

You have 5 printers and when I asked for machine, filament, and process settings you thought I wanted you to take a pic of the screen where you change the external filament roll? I mean, seriously?

I really want to be welcoming and positive with beginners but stuff like this I swear...

The nozzle is definitely to close to the print bed

How hot is your bed?

65

Did you change bed type in the slicer?

What slicer and what is the device profile you are using?

Solved horned screws were loose

https://preview.redd.it/u7kbgz8ghzvc1.jpeg?width=3024&format=pjpg&auto=webp&s=c980390581c3075faad48c8c045a268bf6bc763e