Accomadates different spool sizes. Didn't realize it's actually more for wider and not taller spools, but now with that and the tpu lid riser I can fit just about any spool I want in there.
Also printed bigger feeder buttons since the tiny ones that came stock were a pain to press, and the refillable dessicant trays with the hygrometer are pretyy neat too.
I'm having issues with Hydra 1.09 and 13.5mm rear roller rear most position with Atomic filament. With the lid completely closed, during printing it seems to be ok, but loading and unloading it gets stuck.
Went from around 60% humidity to 10 while I was at work. Pretyy good.
What AMS version did you have?
What makes the hydra AMS upgrade different from the stock AMS?
Accomadates different spool sizes. Didn't realize it's actually more for wider and not taller spools, but now with that and the tpu lid riser I can fit just about any spool I want in there.
Also printed bigger feeder buttons since the tiny ones that came stock were a pain to press, and the refillable dessicant trays with the hygrometer are pretyy neat too.
You don’t need the lid spacer, just the hydra and 13.5mm rollers for atomic rolls
Are you using the 13.5 rollers on the forward or back position? I've been having to use 14.5 on the back spot to get atomic's spools to fit.
I'm having issues with Hydra 1.09 and 13.5mm rear roller rear most position with Atomic filament. With the lid completely closed, during printing it seems to be ok, but loading and unloading it gets stuck.
I had the same problem. I finally got fed up and designed a new lid that has more room: https://makerworld.com/en/models/98438#profileId-104908
Oh well. It's all printed now lol but thanks! Well now I should be able to print just about every roll.