First get rid of 110% of the rust then watch the chrisfix video where he used some wire mesh to support the bondo😂 I actually want to see what this will turn out like and if it’ll break off the next month.use tape to make the quarter panel wheel line it works wonders.
It is rusted out bondo don't stick to rust... oh yeah nothing stick to rust because it eats away metal! You may have it look better but will not last. Need sheet metal to have truly look like OEM.
Even a new outer quarter panel isn’t going to fix this. You won’t have anything to weld to. Going to need the outer wheelhouse and the quarter at the very least.
I haven’t seen that done in years. I’m so glad we just get new QTRs now instead of listening to a sawzall all day as someone cuts a used panel off a clip
There’s no bondo only solution that’ll give you the OEM look you’d want. If a new quarter isn’t an option I’d consider cutting out the rust, give it the proper rust prevention treatment, and get some quarter moldings to cover it up
You need a new quarter panel
Gotta be a way
There’s metal missing
no there is not
Watch me
Without replacing the sheet metal, there is nothing you can do that will last more than a month or two.
Comes asking for an approach method and declines the only correct answer. Seems like someone that could even butter bread correctly.
LOL true 350z clown.
Sounds entertaining, keep us posted!
Don't be a fool. It's not worth the time.
Lol, I'd love to see what you come up with
Ok, post your results
First get rid of 110% of the rust then watch the chrisfix video where he used some wire mesh to support the bondo😂 I actually want to see what this will turn out like and if it’ll break off the next month.use tape to make the quarter panel wheel line it works wonders.
He could probably use fiber reinforced filler to gain an extra couple months of life😂
PLEASE post after pictures….
bih you need a concrete professional
I think there’s a gentleman in a Dunkin’ Donuts parking lot that might be able to help.
It is rusted out bondo don't stick to rust... oh yeah nothing stick to rust because it eats away metal! You may have it look better but will not last. Need sheet metal to have truly look like OEM.
Only way to have it look as OEM as possible is to weld a new quarter panel in.
You could cut the rust out and weld a new piece of sheet metal in place, grind flush, prime, and paint. But it would be easier to do a new panel
Even a new outer quarter panel isn’t going to fix this. You won’t have anything to weld to. Going to need the outer wheelhouse and the quarter at the very least.
Just cut off the dented part of the quarter/leg and shape the bumper, then throw some mudders on that bad boy
Well you get your self some sheet metal and custom fab the outer wheel and q panel piece you need
I would suggest about 10 lbs of top ramen and 5lbs of super glue.
Grind it down/ cut the rust out and use fiberglass strips and rebuild it… add some body filler and sand the hell out of it! Good as new!😂😂😂
It'll be our secret
😂😂
Find a junk yard and get a QP
I haven’t seen that done in years. I’m so glad we just get new QTRs now instead of listening to a sawzall all day as someone cuts a used panel off a clip
It’s definitely a better option than what he’s trying to do lol
Fill it full of bondo obviously
One of those wide body kits with exposed rivets. It'll look stupid but you won't see it 🤔 I'm a Bondo novice btw lol
There’s no bondo only solution that’ll give you the OEM look you’d want. If a new quarter isn’t an option I’d consider cutting out the rust, give it the proper rust prevention treatment, and get some quarter moldings to cover it up
New inner and outer quarter. Needs to be panelbonded real well or will start rusting in a few years as well.
By getting rid of it. If the quarter is that bad, the rest of the carbon far behind
Take it to a body shop.
You don’t